Merge tag 'i2c-for-6.1-rc1-batch2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull more i2c updates from Wolfram Sang:

 - correct a variable type in the new pci1xxxx driver

 - add a new SoC to the qcom-cci driver

 - fix an issue with the designware driver which now got enough testing

 - the aspeed driver now handles busy target backends better

* tag 'i2c-for-6.1-rc1-batch2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: aspeed: Assert NAK when slave is busy
  i2c: designware: Fix handling of real but unexpected device interrupts
  i2c: qcom-cci: Add MSM8226 compatible
  dt-bindings: i2c: qcom,i2c-cci: Document clocks for MSM8974
  dt-bindings: i2c: qcom,i2c-cci: Document MSM8226 compatible
  i2c: microchip: pci1xxxx: Fix comparison of -EPERM against an unsigned variable

Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml

@@ -13,6 +13,7 @@ maintainers:
 properties:
   compatible:
     enum:
+      - qcom,msm8226-cci
       - qcom,msm8916-cci
       - qcom,msm8974-cci
       - qcom,msm8996-cci
@@ -27,11 +28,11 @@ properties:
     const: 0
 
   clocks:
-    minItems: 4
+    minItems: 3
     maxItems: 6
 
   clock-names:
-    minItems: 4
+    minItems: 3
     maxItems: 6
 
   interrupts:
@@ -78,11 +79,29 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,msm8226-cci
               - qcom,msm8916-cci
     then:
       properties:
         i2c-bus@1: false
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8226-cci
+              - qcom,msm8974-cci
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: camss_top_ahb
+            - const: cci_ahb
+            - const: cci
+
   - if:
       properties:
         compatible:

drivers/i2c/busses/i2c-aspeed.c

@@ -244,6 +244,7 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 	u32 command, irq_handled = 0;
 	struct i2c_client *slave = bus->slave;
 	u8 value;
+	int ret;
 
 	if (!slave)
 		return 0;
@@ -311,7 +312,13 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 		break;
 	case ASPEED_I2C_SLAVE_WRITE_REQUESTED:
 		bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED;
-		i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+		ret = i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+		/*
+		 * Slave ACK's on this address phase already but as the backend driver
+		 * returns an errno, the bus driver should nack the next incoming byte.
+		 */
+		if (ret < 0)
+			writel(ASPEED_I2CD_M_S_RX_CMD_LAST, bus->base + ASPEED_I2C_CMD_REG);
 		break;
 	case ASPEED_I2C_SLAVE_WRITE_RECEIVED:
 		i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);

drivers/i2c/busses/i2c-designware-core.h

@@ -126,8 +126,9 @@
  * status codes
  */
 #define STATUS_IDLE			0x0
-#define STATUS_WRITE_IN_PROGRESS	0x1
-#define STATUS_READ_IN_PROGRESS		0x2
+#define STATUS_ACTIVE			0x1
+#define STATUS_WRITE_IN_PROGRESS	0x2
+#define STATUS_READ_IN_PROGRESS		0x4
 
 /*
  * operation modes
@@ -334,12 +335,14 @@ void i2c_dw_disable_int(struct dw_i2c_dev *dev);
 
 static inline void __i2c_dw_enable(struct dw_i2c_dev *dev)
 {
+	dev->status |= STATUS_ACTIVE;
 	regmap_write(dev->map, DW_IC_ENABLE, 1);
 }
 
 static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev)
 {
 	regmap_write(dev->map, DW_IC_ENABLE, 0);
+	dev->status &= ~STATUS_ACTIVE;
 }
 
 void __i2c_dw_disable(struct dw_i2c_dev *dev);

drivers/i2c/busses/i2c-designware-master.c

@@ -716,6 +716,19 @@ static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev)
 	u32 stat;
 
 	stat = i2c_dw_read_clear_intrbits(dev);
+
+	if (!(dev->status & STATUS_ACTIVE)) {
+		/*
+		 * Unexpected interrupt in driver point of view. State
+		 * variables are either unset or stale so acknowledge and
+		 * disable interrupts for suppressing further interrupts if
+		 * interrupt really came from this HW (E.g. firmware has left
+		 * the HW active).
+		 */
+		regmap_write(dev->map, DW_IC_INTR_MASK, 0);
+		return 0;
+	}
+
 	if (stat & DW_IC_INTR_TX_ABRT) {
 		dev->cmd_err |= DW_IC_ERR_TX_ABRT;
 		dev->status = STATUS_IDLE;

drivers/i2c/busses/i2c-mchp-pci1xxxx.c

@@ -708,7 +708,7 @@ static void pci1xxxx_i2c_init(struct pci1xxxx_i2c *i2c)
 	void __iomem *p2 = i2c->i2c_base + SMBUS_STATUS_REG_OFF;
 	void __iomem *p1 = i2c->i2c_base + SMB_GPR_REG;
 	u8 regval;
-	u8 ret;
+	int ret;
 
 	ret = set_sys_lock(i2c);
 	if (ret == -EPERM) {

drivers/i2c/busses/i2c-qcom-cci.c

@@ -807,6 +807,7 @@ static const struct cci_data cci_v2_data = {
 };
 
 static const struct of_device_id cci_dt_match[] = {
+	{ .compatible = "qcom,msm8226-cci", .data = &cci_v1_data},
 	{ .compatible = "qcom,msm8916-cci", .data = &cci_v1_data},
 	{ .compatible = "qcom,msm8974-cci", .data = &cci_v1_5_data},
 	{ .compatible = "qcom,msm8996-cci", .data = &cci_v2_data},