Merge tag 'lpc32xx-soc-for-5.1' of https://github.com/vzapolskiy/linux-lpc32xx into arm/fixes

ARM: lpc32xx: platform updates for v5.1

Here are the changes for ARM NXP LPC32xx platform files:

* removed a superfluous record to kernel log buffer under OOM condition,
* use kmemdup() helper instead of kmalloc()/memcpy() pair,
* removed platform data of ARM PL180 SD/MMC and ARM PL111 LCD controllers,
  since now both are handled in devicetree files.

* tag 'lpc32xx-soc-for-5.1' of https://github.com/vzapolskiy/linux-lpc32xx:
  ARM: lpc32xx: remove platform data of ARM PL111 LCD controller
  ARM: lpc32xx: remove platform data of ARM PL180 SD/MMC controller
  ARM: lpc32xx: Use kmemdup to replace duplicating its implementation
  ARM: lpc32xx: Delete an error message for a failed memory allocation in lpc32xx_pm_enter()
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-lpc32xx/phy3250.c

@@ -45,73 +45,6 @@
 #include <mach/board.h>
 #include "common.h"
 
-/*
- * AMBA LCD controller
- */
-static struct clcd_panel conn_lcd_panel = {
-	.mode		= {
-		.name		= "QVGA portrait",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 191828,
-		.left_margin	= 22,
-		.right_margin	= 11,
-		.upper_margin	= 2,
-		.lower_margin	= 1,
-		.hsync_len	= 5,
-		.vsync_len	= 2,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= (TIM2_IVS | TIM2_IHS),
-	.cntl		= (CNTL_BGR | CNTL_LCDTFT | CNTL_LCDVCOMP(1) |
-				CNTL_LCDBPP16_565),
-	.bpp		= 16,
-};
-#define PANEL_SIZE (3 * SZ_64K)
-
-static int lpc32xx_clcd_setup(struct clcd_fb *fb)
-{
-	dma_addr_t dma;
-
-	fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, PANEL_SIZE, &dma,
-					  GFP_KERNEL);
-	if (!fb->fb.screen_base) {
-		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
-		return -ENOMEM;
-	}
-
-	fb->fb.fix.smem_start = dma;
-	fb->fb.fix.smem_len = PANEL_SIZE;
-	fb->panel = &conn_lcd_panel;
-
-	return 0;
-}
-
-static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
-{
-	return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
-			   fb->fb.fix.smem_start, fb->fb.fix.smem_len);
-}
-
-static void lpc32xx_clcd_remove(struct clcd_fb *fb)
-{
-	dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base,
-		    fb->fb.fix.smem_start);
-}
-
-static struct clcd_board lpc32xx_clcd_data = {
-	.name		= "Phytec LCD",
-	.check		= clcdfb_check,
-	.decode		= clcdfb_decode,
-	.setup		= lpc32xx_clcd_setup,
-	.mmap		= lpc32xx_clcd_mmap,
-	.remove		= lpc32xx_clcd_remove,
-};
-
 static struct pl08x_channel_data pl08x_slave_channels[] = {
 	{
 		.bus_id = "nand-slc",
@@ -148,11 +81,6 @@ static struct pl08x_platform_data pl08x_pd = {
 	.mem_buses = PL08X_AHB1,
 };
 
-static struct mmci_platform_data lpc32xx_mmci_data = {
-	.ocr_mask	= MMC_VDD_30_31 | MMC_VDD_31_32 |
-			  MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
 static struct lpc32xx_slc_platform_data lpc32xx_slc_data = {
 	.dma_filter = pl08x_filter_id,
 };
@@ -164,10 +92,7 @@ static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = {
 static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", NULL),
 	OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", NULL),
-	OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data),
 	OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
-	OF_DEV_AUXDATA("arm,pl18x", 0x20098000, "20098000.sd",
-		       &lpc32xx_mmci_data),
 	OF_DEV_AUXDATA("nxp,lpc3220-slc", 0x20020000, "20020000.flash",
 		       &lpc32xx_slc_data),
 	OF_DEV_AUXDATA("nxp,lpc3220-mlc", 0x200a8000, "200a8000.flash",
@@ -177,15 +102,6 @@ static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
 
 static void __init lpc3250_machine_init(void)
 {
-	u32 tmp;
-
-	/* Setup LCD muxing to RGB565 */
-	tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL) &
-		~(LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK |
-		LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK);
-	tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16;
-	__raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL);
-
 	lpc32xx_serial_init();
 
 	/* Test clock needed for UDA1380 initial init */

arch/arm/mach-lpc32xx/pm.c

@@ -86,17 +86,10 @@ static int lpc32xx_pm_enter(suspend_state_t state)
 	void *iram_swap_area;
 
 	/* Allocate some space for temporary IRAM storage */
-	iram_swap_area = kmalloc(lpc32xx_sys_suspend_sz, GFP_KERNEL);
-	if (!iram_swap_area) {
-		printk(KERN_ERR
-		       "PM Suspend: cannot allocate memory to save portion "
-			"of SRAM\n");
+	iram_swap_area = kmemdup((void *)TEMP_IRAM_AREA,
+				 lpc32xx_sys_suspend_sz, GFP_KERNEL);
+	if (!iram_swap_area)
 		return -ENOMEM;
-	}
-
-	/* Backup a small area of IRAM used for the suspend code */
-	memcpy(iram_swap_area, (void *) TEMP_IRAM_AREA,
-		lpc32xx_sys_suspend_sz);
 
 	/*
 	 * Copy code to suspend system into IRAM. The suspend code