Commit c4806174 authored by Jassi Brar's avatar Jassi Brar Committed by Mark Brown

ARM: S3C2412: DMA: Remove I2S FIFO address

The S3C DMA API doesn't make use of hw_addr.to/from and also
the FIFO addresses are provided from the I2S drivers. So these
fields are redundant.
This patch removes the hw_addr.to/from fields for I2S and the
inclusion of header, paving way for the header to be moved closer
to the I2S controller drivers.
Signed-off-by: default avatarJassi Brar <jassi.brar@samsung.com>
Acked-by: default avatarBen Dooks <ben-linux@fluff.org>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 8a7c2518
...@@ -30,7 +30,6 @@ ...@@ -30,7 +30,6 @@
#include <mach/regs-mem.h> #include <mach/regs-mem.h>
#include <mach/regs-lcd.h> #include <mach/regs-lcd.h>
#include <mach/regs-sdi.h> #include <mach/regs-sdi.h>
#include <plat/regs-s3c2412-iis.h>
#include <plat/regs-iis.h> #include <plat/regs-iis.h>
#include <plat/regs-spi.h> #include <plat/regs-spi.h>
...@@ -119,13 +118,11 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = { ...@@ -119,13 +118,11 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
.name = "i2s-sdi", .name = "i2s-sdi",
.channels = MAP(S3C2412_DMAREQSEL_I2SRX), .channels = MAP(S3C2412_DMAREQSEL_I2SRX),
.channels_rx = MAP(S3C2412_DMAREQSEL_I2SRX), .channels_rx = MAP(S3C2412_DMAREQSEL_I2SRX),
.hw_addr.from = S3C2410_PA_IIS + S3C2412_IISRXD,
}, },
[DMACH_I2S_OUT] = { [DMACH_I2S_OUT] = {
.name = "i2s-sdo", .name = "i2s-sdo",
.channels = MAP(S3C2412_DMAREQSEL_I2STX), .channels = MAP(S3C2412_DMAREQSEL_I2STX),
.channels_rx = MAP(S3C2412_DMAREQSEL_I2STX), .channels_rx = MAP(S3C2412_DMAREQSEL_I2STX),
.hw_addr.to = S3C2410_PA_IIS + S3C2412_IISTXD,
}, },
[DMACH_USB_EP1] = { [DMACH_USB_EP1] = {
.name = "usb-ep1", .name = "usb-ep1",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment