Commit c4a987db authored by Huacai Chen's avatar Huacai Chen Committed by Ralf Baechle

MIPS: Loongson 3: Add CPU hotplug support

Tips of Loongson's CPU hotplug:
1, To fully shutdown a core in Loongson 3, the target core should go to
   CKSEG1 and flush all L1 cache entries at first. Then, another core
   (usually Core 0) can safely disable the clock of the target core. So
   play_dead() call loongson3_play_dead() via CKSEG1 (both uncached and
   unmmaped).
2, The default clocksource of Loongson is MIPS. Since clock source is a
   global device, timekeeping need the CP0' Count registers of each core
   be synchronous. Thus, when a core is up, we use a SMP_ASK_C0COUNT IPI
   to ask Core-0's Count.
Signed-off-by: default avatarHuacai Chen <chenhc@lemote.com>
Signed-off-by: default avatarHongliang Tao <taohl@lemote.com>
Signed-off-by: default avatarHua Yan <yanh@lemote.com>
Tested-by: default avatarAlex Smith <alex.smith@imgtec.com>
Reviewed-by: default avatarAlex Smith <alex.smith@imgtec.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/6639Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 300459d5
......@@ -37,6 +37,7 @@
#endif
extern void fixup_irqs(void);
extern void loongson3_ipi_interrupt(struct pt_regs *regs);
#include_next <irq.h>
......
......@@ -249,6 +249,9 @@ static inline void do_perfcnt_IRQ(void)
#define LOONGSON_PXARB_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x68)
#define LOONGSON_PXARB_STATUS LOONGSON_REG(LOONGSON_REGBASE + 0x6c)
/* Chip Config */
#define LOONGSON_CHIPCFG0 LOONGSON_REG(LOONGSON_REGBASE + 0x80)
/* pcimap */
#define LOONGSON_PCIMAP_PCIMAP_LO0 0x0000003f
......@@ -264,9 +267,6 @@ static inline void do_perfcnt_IRQ(void)
#ifdef CONFIG_CPU_SUPPORTS_CPUFREQ
#include <linux/cpufreq.h>
extern struct cpufreq_frequency_table loongson2_clockmod_table[];
/* Chip Config */
#define LOONGSON_CHIPCFG0 LOONGSON_REG(LOONGSON_REGBASE + 0x80)
#endif
/*
......
......@@ -42,6 +42,7 @@ extern int __cpu_logical_map[NR_CPUS];
#define SMP_ICACHE_FLUSH 0x4
/* Used by kexec crashdump to save all cpu's state */
#define SMP_DUMP 0x8
#define SMP_ASK_C0COUNT 0x10
extern volatile cpumask_t cpu_callin_map;
......
......@@ -79,6 +79,7 @@ config LEMOTE_MACH3A
select SYS_HAS_CPU_LOONGSON3
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_SMP
select SYS_SUPPORTS_HOTPLUG_CPU
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
......
......@@ -114,3 +114,13 @@ void __init mach_init_irq(void)
set_c0_status(STATUSF_IP2 | STATUSF_IP6);
}
#ifdef CONFIG_HOTPLUG_CPU
void fixup_irqs(void)
{
irq_cpu_offline();
clear_c0_status(ST0_IM);
}
#endif
......@@ -23,10 +23,14 @@
#include <asm/time.h>
#include <asm/clock.h>
#include <asm/tlbflush.h>
#include <asm/cacheflush.h>
#include <loongson.h>
#include "smp.h"
DEFINE_PER_CPU(int, cpu_state);
DEFINE_PER_CPU(uint32_t, core0_c0count);
/* read a 32bit value from ipi register */
#define loongson3_ipi_read32(addr) readl(addr)
/* read a 64bit value from ipi register */
......@@ -158,8 +162,8 @@ loongson3_send_ipi_mask(const struct cpumask *mask, unsigned int action)
void loongson3_ipi_interrupt(struct pt_regs *regs)
{
int cpu = smp_processor_id();
unsigned int action;
int i, cpu = smp_processor_id();
unsigned int action, c0count;
/* Load the ipi register to figure out what we're supposed to do */
action = loongson3_ipi_read32(ipi_status0_regs[cpu]);
......@@ -172,14 +176,24 @@ void loongson3_ipi_interrupt(struct pt_regs *regs)
if (action & SMP_CALL_FUNCTION)
smp_call_function_interrupt();
if (action & SMP_ASK_C0COUNT) {
BUG_ON(cpu != 0);
c0count = read_c0_count();
for (i = 1; i < loongson_sysconf.nr_cpus; i++)
per_cpu(core0_c0count, i) = c0count;
}
}
#define MAX_LOOPS 1111
/*
* SMP init and finish on secondary CPUs
*/
static void loongson3_init_secondary(void)
{
int i;
uint32_t initcount;
unsigned int cpu = smp_processor_id();
unsigned int imask = STATUSF_IP7 | STATUSF_IP6 |
STATUSF_IP3 | STATUSF_IP2;
......@@ -188,6 +202,21 @@ static void loongson3_init_secondary(void)
for (i = 0; i < loongson_sysconf.nr_cpus; i++)
loongson3_ipi_write32(0xffffffff, ipi_en0_regs[i]);
per_cpu(cpu_state, cpu) = CPU_ONLINE;
i = 0;
__get_cpu_var(core0_c0count) = 0;
loongson3_send_ipi_single(0, SMP_ASK_C0COUNT);
while (!__get_cpu_var(core0_c0count)) {
i++;
cpu_relax();
}
if (i > MAX_LOOPS)
i = MAX_LOOPS;
initcount = __get_cpu_var(core0_c0count) + i;
write_c0_count(initcount);
}
static void loongson3_smp_finish(void)
......@@ -222,6 +251,8 @@ static void __init loongson3_smp_setup(void)
static void __init loongson3_prepare_cpus(unsigned int max_cpus)
{
init_cpu_present(cpu_possible_mask);
per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
}
/*
......@@ -255,6 +286,147 @@ static void __init loongson3_cpus_done(void)
{
}
#ifdef CONFIG_HOTPLUG_CPU
static int loongson3_cpu_disable(void)
{
unsigned long flags;
unsigned int cpu = smp_processor_id();
if (cpu == 0)
return -EBUSY;
set_cpu_online(cpu, false);
cpu_clear(cpu, cpu_callin_map);
local_irq_save(flags);
fixup_irqs();
local_irq_restore(flags);
flush_cache_all();
local_flush_tlb_all();
return 0;
}
static void loongson3_cpu_die(unsigned int cpu)
{
while (per_cpu(cpu_state, cpu) != CPU_DEAD)
cpu_relax();
mb();
}
/* To shutdown a core in Loongson 3, the target core should go to CKSEG1 and
* flush all L1 entries at first. Then, another core (usually Core 0) can
* safely disable the clock of the target core. loongson3_play_dead() is
* called via CKSEG1 (uncached and unmmaped) */
static void loongson3_play_dead(int *state_addr)
{
register int val;
register long cpuid, core, node, count;
register void *addr, *base, *initfunc;
__asm__ __volatile__(
" .set push \n"
" .set noreorder \n"
" li %[addr], 0x80000000 \n" /* KSEG0 */
"1: cache 0, 0(%[addr]) \n" /* flush L1 ICache */
" cache 0, 1(%[addr]) \n"
" cache 0, 2(%[addr]) \n"
" cache 0, 3(%[addr]) \n"
" cache 1, 0(%[addr]) \n" /* flush L1 DCache */
" cache 1, 1(%[addr]) \n"
" cache 1, 2(%[addr]) \n"
" cache 1, 3(%[addr]) \n"
" addiu %[sets], %[sets], -1 \n"
" bnez %[sets], 1b \n"
" addiu %[addr], %[addr], 0x20 \n"
" li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */
" sw %[val], (%[state_addr]) \n"
" sync \n"
" cache 21, (%[state_addr]) \n" /* flush entry of *state_addr */
" .set pop \n"
: [addr] "=&r" (addr), [val] "=&r" (val)
: [state_addr] "r" (state_addr),
[sets] "r" (cpu_data[smp_processor_id()].dcache.sets));
__asm__ __volatile__(
" .set push \n"
" .set noreorder \n"
" .set mips64 \n"
" mfc0 %[cpuid], $15, 1 \n"
" andi %[cpuid], 0x3ff \n"
" dli %[base], 0x900000003ff01000 \n"
" andi %[core], %[cpuid], 0x3 \n"
" sll %[core], 8 \n" /* get core id */
" or %[base], %[base], %[core] \n"
" andi %[node], %[cpuid], 0xc \n"
" dsll %[node], 42 \n" /* get node id */
" or %[base], %[base], %[node] \n"
"1: li %[count], 0x100 \n" /* wait for init loop */
"2: bnez %[count], 2b \n" /* limit mailbox access */
" addiu %[count], -1 \n"
" ld %[initfunc], 0x20(%[base]) \n" /* get PC via mailbox */
" beqz %[initfunc], 1b \n"
" nop \n"
" ld $sp, 0x28(%[base]) \n" /* get SP via mailbox */
" ld $gp, 0x30(%[base]) \n" /* get GP via mailbox */
" ld $a1, 0x38(%[base]) \n"
" jr %[initfunc] \n" /* jump to initial PC */
" nop \n"
" .set pop \n"
: [core] "=&r" (core), [node] "=&r" (node),
[base] "=&r" (base), [cpuid] "=&r" (cpuid),
[count] "=&r" (count), [initfunc] "=&r" (initfunc)
: /* No Input */
: "a1");
}
void play_dead(void)
{
int *state_addr;
unsigned int cpu = smp_processor_id();
void (*play_dead_at_ckseg1)(int *);
idle_task_exit();
play_dead_at_ckseg1 =
(void *)CKSEG1ADDR((unsigned long)loongson3_play_dead);
state_addr = &per_cpu(cpu_state, cpu);
mb();
play_dead_at_ckseg1(state_addr);
}
#define CPU_POST_DEAD_FROZEN (CPU_POST_DEAD | CPU_TASKS_FROZEN)
static int loongson3_cpu_callback(struct notifier_block *nfb,
unsigned long action, void *hcpu)
{
unsigned int cpu = (unsigned long)hcpu;
switch (action) {
case CPU_POST_DEAD:
case CPU_POST_DEAD_FROZEN:
pr_info("Disable clock for CPU#%d\n", cpu);
LOONGSON_CHIPCFG0 &= ~(1 << (12 + cpu));
break;
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
pr_info("Enable clock for CPU#%d\n", cpu);
LOONGSON_CHIPCFG0 |= 1 << (12 + cpu);
break;
}
return NOTIFY_OK;
}
static int register_loongson3_notifier(void)
{
hotcpu_notifier(loongson3_cpu_callback, 0);
return 0;
}
early_initcall(register_loongson3_notifier);
#endif
struct plat_smp_ops loongson3_smp_ops = {
.send_ipi_single = loongson3_send_ipi_single,
.send_ipi_mask = loongson3_send_ipi_mask,
......@@ -264,4 +436,8 @@ struct plat_smp_ops loongson3_smp_ops = {
.boot_secondary = loongson3_boot_secondary,
.smp_setup = loongson3_smp_setup,
.prepare_cpus = loongson3_prepare_cpus,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_disable = loongson3_cpu_disable,
.cpu_die = loongson3_cpu_die,
#endif
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment