Commit c4c1663b authored by NeilBrown's avatar NeilBrown

md/raid5: replace sh->lock with an 'active' flag.

sh->lock is now mainly used to ensure that two threads aren't running
in the locked part of handle_stripe[56] at the same time.

That can more neatly be achieved with an 'active' flag which we set
while running handle_stripe.  If we find the flag is set, we simply
requeue the stripe for later by setting STRIPE_HANDLE.

For safety we take ->device_lock while examining the state of the
stripe and creating a summary in 'stripe_head_state / r6_state'.
This possibly isn't needed but as shared fields like ->toread,
->towrite are checked it is safer for now at least.

We leave the label after the old 'unlock' called "unlock" because it
will disappear in a few patches, so renaming seems pointless.

This leaves the stripe 'locked' for longer as we clear STRIPE_ACTIVE
later, but that is not a problem.
Signed-off-by: default avatarNeilBrown <neilb@suse.de>
Reviewed-by: default avatarNamhyung Kim <namhyung@gmail.com>
parent cbe47ec5
......@@ -1020,14 +1020,12 @@ ops_run_biodrain(struct stripe_head *sh, struct dma_async_tx_descriptor *tx)
if (test_and_clear_bit(R5_Wantdrain, &dev->flags)) {
struct bio *wbi;
spin_lock(&sh->lock);
spin_lock_irq(&sh->raid_conf->device_lock);
chosen = dev->towrite;
dev->towrite = NULL;
BUG_ON(dev->written);
wbi = dev->written = chosen;
spin_unlock_irq(&sh->raid_conf->device_lock);
spin_unlock(&sh->lock);
while (wbi && wbi->bi_sector <
dev->sector + STRIPE_SECTORS) {
......@@ -1322,7 +1320,6 @@ static int grow_one_stripe(raid5_conf_t *conf)
return 0;
sh->raid_conf = conf;
spin_lock_init(&sh->lock);
#ifdef CONFIG_MULTICORE_RAID456
init_waitqueue_head(&sh->ops.wait_for_ops);
#endif
......@@ -1442,7 +1439,6 @@ static int resize_stripes(raid5_conf_t *conf, int newsize)
break;
nsh->raid_conf = conf;
spin_lock_init(&nsh->lock);
#ifdef CONFIG_MULTICORE_RAID456
init_waitqueue_head(&nsh->ops.wait_for_ops);
#endif
......@@ -2148,7 +2144,6 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in
(unsigned long long)sh->sector);
spin_lock(&sh->lock);
spin_lock_irq(&conf->device_lock);
if (forwrite) {
bip = &sh->dev[dd_idx].towrite;
......@@ -2184,7 +2179,6 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in
set_bit(R5_OVERWRITE, &sh->dev[dd_idx].flags);
}
spin_unlock_irq(&conf->device_lock);
spin_unlock(&sh->lock);
pr_debug("added bi b#%llu to stripe s#%llu, disk %d.\n",
(unsigned long long)(*bip)->bi_sector,
......@@ -2201,7 +2195,6 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in
overlap:
set_bit(R5_Overlap, &sh->dev[dd_idx].flags);
spin_unlock_irq(&conf->device_lock);
spin_unlock(&sh->lock);
return 0;
}
......@@ -3023,12 +3016,10 @@ static void handle_stripe5(struct stripe_head *sh)
atomic_read(&sh->count), sh->pd_idx, sh->check_state,
sh->reconstruct_state);
spin_lock(&sh->lock);
if (test_and_clear_bit(STRIPE_SYNC_REQUESTED, &sh->state)) {
set_bit(STRIPE_SYNCING, &sh->state);
clear_bit(STRIPE_INSYNC, &sh->state);
}
clear_bit(STRIPE_HANDLE, &sh->state);
clear_bit(STRIPE_DELAYED, &sh->state);
s.syncing = test_bit(STRIPE_SYNCING, &sh->state);
......@@ -3037,6 +3028,7 @@ static void handle_stripe5(struct stripe_head *sh)
/* Now to look around and see what can be done */
rcu_read_lock();
spin_lock_irq(&conf->device_lock);
for (i=disks; i--; ) {
mdk_rdev_t *rdev;
......@@ -3099,6 +3091,7 @@ static void handle_stripe5(struct stripe_head *sh)
s.failed_num = i;
}
}
spin_unlock_irq(&conf->device_lock);
rcu_read_unlock();
if (unlikely(blocked_rdev)) {
......@@ -3275,7 +3268,6 @@ static void handle_stripe5(struct stripe_head *sh)
handle_stripe_expansion(conf, sh, NULL);
unlock:
spin_unlock(&sh->lock);
/* wait for this device to become unblocked */
if (unlikely(blocked_rdev))
......@@ -3318,12 +3310,10 @@ static void handle_stripe6(struct stripe_head *sh)
sh->check_state, sh->reconstruct_state);
memset(&s, 0, sizeof(s));
spin_lock(&sh->lock);
if (test_and_clear_bit(STRIPE_SYNC_REQUESTED, &sh->state)) {
set_bit(STRIPE_SYNCING, &sh->state);
clear_bit(STRIPE_INSYNC, &sh->state);
}
clear_bit(STRIPE_HANDLE, &sh->state);
clear_bit(STRIPE_DELAYED, &sh->state);
s.syncing = test_bit(STRIPE_SYNCING, &sh->state);
......@@ -3332,6 +3322,7 @@ static void handle_stripe6(struct stripe_head *sh)
/* Now to look around and see what can be done */
rcu_read_lock();
spin_lock_irq(&conf->device_lock);
for (i=disks; i--; ) {
mdk_rdev_t *rdev;
dev = &sh->dev[i];
......@@ -3395,6 +3386,7 @@ static void handle_stripe6(struct stripe_head *sh)
s.failed++;
}
}
spin_unlock_irq(&conf->device_lock);
rcu_read_unlock();
if (unlikely(blocked_rdev)) {
......@@ -3580,7 +3572,6 @@ static void handle_stripe6(struct stripe_head *sh)
handle_stripe_expansion(conf, sh, &r6s);
unlock:
spin_unlock(&sh->lock);
/* wait for this device to become unblocked */
if (unlikely(blocked_rdev))
......@@ -3608,10 +3599,19 @@ static void handle_stripe6(struct stripe_head *sh)
static void handle_stripe(struct stripe_head *sh)
{
clear_bit(STRIPE_HANDLE, &sh->state);
if (test_and_set_bit(STRIPE_ACTIVE, &sh->state)) {
/* already being handled, ensure it gets handled
* again when current action finishes */
set_bit(STRIPE_HANDLE, &sh->state);
return;
}
if (sh->raid_conf->level == 6)
handle_stripe6(sh);
else
handle_stripe5(sh);
clear_bit(STRIPE_ACTIVE, &sh->state);
}
static void raid5_activate_delayed(raid5_conf_t *conf)
......
......@@ -6,11 +6,11 @@
/*
*
* Each stripe contains one buffer per disc. Each buffer can be in
* Each stripe contains one buffer per device. Each buffer can be in
* one of a number of states stored in "flags". Changes between
* these states happen *almost* exclusively under a per-stripe
* spinlock. Some very specific changes can happen in bi_end_io, and
* these are not protected by the spin lock.
* these states happen *almost* exclusively under the protection of the
* STRIPE_ACTIVE flag. Some very specific changes can happen in bi_end_io, and
* these are not protected by STRIPE_ACTIVE.
*
* The flag bits that are used to represent these states are:
* R5_UPTODATE and R5_LOCKED
......@@ -76,12 +76,10 @@
* block and the cached buffer are successfully written, any buffer on
* a written list can be returned with b_end_io.
*
* The write list and read list both act as fifos. The read list is
* protected by the device_lock. The write and written lists are
* protected by the stripe lock. The device_lock, which can be
* claimed while the stipe lock is held, is only for list
* manipulations and will only be held for a very short time. It can
* be claimed from interrupts.
* The write list and read list both act as fifos. The read list,
* write list and written list are protected by the device_lock.
* The device_lock is only for list manipulations and will only be
* held for a very short time. It can be claimed from interrupts.
*
*
* Stripes in the stripe cache can be on one of two lists (or on
......@@ -96,7 +94,6 @@
*
* The inactive_list, handle_list and hash bucket lists are all protected by the
* device_lock.
* - stripes on the inactive_list never have their stripe_lock held.
* - stripes have a reference counter. If count==0, they are on a list.
* - If a stripe might need handling, STRIPE_HANDLE is set.
* - When refcount reaches zero, then if STRIPE_HANDLE it is put on
......@@ -116,10 +113,10 @@
* attach a request to an active stripe (add_stripe_bh())
* lockdev attach-buffer unlockdev
* handle a stripe (handle_stripe())
* lockstripe clrSTRIPE_HANDLE ...
* setSTRIPE_ACTIVE, clrSTRIPE_HANDLE ...
* (lockdev check-buffers unlockdev) ..
* change-state ..
* record io/ops needed unlockstripe schedule io/ops
* record io/ops needed clearSTRIPE_ACTIVE schedule io/ops
* release an active stripe (release_stripe())
* lockdev if (!--cnt) { if STRIPE_HANDLE, add to handle_list else add to inactive-list } unlockdev
*
......@@ -128,8 +125,7 @@
* on a cached buffer, and plus one if the stripe is undergoing stripe
* operations.
*
* Stripe operations are performed outside the stripe lock,
* the stripe operations are:
* The stripe operations are:
* -copying data between the stripe cache and user application buffers
* -computing blocks to save a disk access, or to recover a missing block
* -updating the parity on a write operation (reconstruct write and
......@@ -159,7 +155,8 @@
*/
/*
* Operations state - intermediate states that are visible outside of sh->lock
* Operations state - intermediate states that are visible outside of
* STRIPE_ACTIVE.
* In general _idle indicates nothing is running, _run indicates a data
* processing operation is active, and _result means the data processing result
* is stable and can be acted upon. For simple operations like biofill and
......@@ -209,7 +206,6 @@ struct stripe_head {
short ddf_layout;/* use DDF ordering to calculate Q */
unsigned long state; /* state flags */
atomic_t count; /* nr of active thread/requests */
spinlock_t lock;
int bm_seq; /* sequence number for bitmap flushes */
int disks; /* disks in stripe */
enum check_states check_state;
......@@ -240,7 +236,7 @@ struct stripe_head {
};
/* stripe_head_state - collects and tracks the dynamic state of a stripe_head
* for handle_stripe. It is only valid under spin_lock(sh->lock);
* for handle_stripe.
*/
struct stripe_head_state {
int syncing, expanding, expanded;
......@@ -290,6 +286,7 @@ struct r6_state {
* Stripe state
*/
enum {
STRIPE_ACTIVE,
STRIPE_HANDLE,
STRIPE_SYNC_REQUESTED,
STRIPE_SYNCING,
......@@ -339,7 +336,7 @@ enum {
* PREREAD_ACTIVE.
* In stripe_handle, if we find pre-reading is necessary, we do it if
* PREREAD_ACTIVE is set, else we set DELAYED which will send it to the delayed queue.
* HANDLE gets cleared if stripe_handle leave nothing locked.
* HANDLE gets cleared if stripe_handle leaves nothing locked.
*/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment