Commit c52c1599 authored by Sagi Grimberg's avatar Sagi Grimberg Committed by Luis Henriques

iser-target: Fix NULL dereference in SW mode DIF

commit 302cc7c3 upstream.

Fallback to software mode DIF if HCA does not support
PI (without crashing obviously). It is still possible to
run with backend protection and an unprotected frontend,
so looking at the command prot_op is not enough. Check
device PI capability on a per-IO basis (isert_prot_cmd
inline static) to determine if we need to handle protection
information.

Trace:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: [<ffffffffa037f8b1>] isert_reg_sig_mr+0x351/0x3b0 [ib_isert]
Call Trace:
 [<ffffffff812b003a>] ? swiotlb_map_sg_attrs+0x7a/0x130
 [<ffffffffa038184d>] isert_reg_rdma+0x2fd/0x370 [ib_isert]
 [<ffffffff8108f2ec>] ? idle_balance+0x6c/0x2c0
 [<ffffffffa0382b68>] isert_put_datain+0x68/0x210 [ib_isert]
 [<ffffffffa02acf5b>] lio_queue_data_in+0x2b/0x30 [iscsi_target_mod]
 [<ffffffffa02306eb>] target_complete_ok_work+0x21b/0x310 [target_core_mod]
 [<ffffffff8106ece2>] process_one_work+0x182/0x3b0
 [<ffffffff8106fda0>] worker_thread+0x120/0x3c0
 [<ffffffff8106fc80>] ? maybe_create_worker+0x190/0x190
 [<ffffffff8107594e>] kthread+0xce/0xf0
 [<ffffffff81075880>] ? kthread_freezable_should_stop+0x70/0x70
 [<ffffffff8159a22c>] ret_from_fork+0x7c/0xb0
 [<ffffffff81075880>] ? kthread_freezable_should_stop+0x70/0x70
Reported-by: default avatarSlava Shwartsman <valyushash@gmail.com>
Signed-off-by: default avatarSagi Grimberg <sagig@mellanox.com>
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
parent 2a9a256d
......@@ -61,6 +61,14 @@ static int
isert_rdma_accept(struct isert_conn *isert_conn);
struct rdma_cm_id *isert_setup_id(struct isert_np *isert_np);
static inline bool
isert_prot_cmd(struct isert_conn *conn, struct se_cmd *cmd)
{
return (conn->conn_device->pi_capable &&
cmd->prot_op != TARGET_PROT_NORMAL);
}
static void
isert_qp_event_callback(struct ib_event *e, void *context)
{
......@@ -2930,8 +2938,7 @@ isert_reg_rdma(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
if (ret)
return ret;
if (wr->data.dma_nents != 1 ||
se_cmd->prot_op != TARGET_PROT_NORMAL) {
if (wr->data.dma_nents != 1 || isert_prot_cmd(isert_conn, se_cmd)) {
spin_lock_irqsave(&isert_conn->conn_lock, flags);
fr_desc = list_first_entry(&isert_conn->conn_fr_pool,
struct fast_reg_descriptor, list);
......@@ -2945,7 +2952,7 @@ isert_reg_rdma(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
if (ret)
goto unmap_cmd;
if (se_cmd->prot_op != TARGET_PROT_NORMAL) {
if (isert_prot_cmd(isert_conn, se_cmd)) {
ret = isert_handle_prot_cmd(isert_conn, isert_cmd, wr);
if (ret)
goto unmap_cmd;
......@@ -2970,7 +2977,7 @@ isert_reg_rdma(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
send_wr->opcode = IB_WR_RDMA_WRITE;
send_wr->wr.rdma.remote_addr = isert_cmd->read_va;
send_wr->wr.rdma.rkey = isert_cmd->read_stag;
send_wr->send_flags = se_cmd->prot_op == TARGET_PROT_NORMAL ?
send_wr->send_flags = !isert_prot_cmd(isert_conn, se_cmd) ?
0 : IB_SEND_SIGNALED;
} else {
send_wr->opcode = IB_WR_RDMA_READ;
......@@ -3012,7 +3019,7 @@ isert_put_datain(struct iscsi_conn *conn, struct iscsi_cmd *cmd)
return rc;
}
if (se_cmd->prot_op == TARGET_PROT_NORMAL) {
if (!isert_prot_cmd(isert_conn, se_cmd)) {
/*
* Build isert_conn->tx_desc for iSCSI response PDU and attach
*/
......@@ -3035,7 +3042,7 @@ isert_put_datain(struct iscsi_conn *conn, struct iscsi_cmd *cmd)
atomic_sub(wr->send_wr_num, &isert_conn->post_send_buf_count);
}
if (se_cmd->prot_op == TARGET_PROT_NORMAL)
if (!isert_prot_cmd(isert_conn, se_cmd))
pr_debug("Cmd: %p posted RDMA_WRITE + Response for iSER Data "
"READ\n", isert_cmd);
else
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment