Commit c530781c authored by John Crispin's avatar John Crispin Committed by Ralf Baechle

MIPS: lantiq: add reset-controller api support

Add a reset-controller binding for the reset registers found on the lantiq
SoC.
Signed-off-by: default avatarJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/8043/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 05637f10
...@@ -296,6 +296,8 @@ config LANTIQ ...@@ -296,6 +296,8 @@ config LANTIQ
select USE_OF select USE_OF
select PINCTRL select PINCTRL
select PINCTRL_LANTIQ select PINCTRL_LANTIQ
select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
config LASAT config LASAT
bool "LASAT Networks platforms" bool "LASAT Networks platforms"
......
...@@ -14,6 +14,7 @@ ...@@ -14,6 +14,7 @@
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/of_address.h> #include <linux/of_address.h>
#include <linux/of_platform.h> #include <linux/of_platform.h>
#include <linux/reset-controller.h>
#include <asm/reboot.h> #include <asm/reboot.h>
...@@ -113,6 +114,66 @@ void ltq_reset_once(unsigned int module, ulong u) ...@@ -113,6 +114,66 @@ void ltq_reset_once(unsigned int module, ulong u)
ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~module, RCU_RST_REQ); ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~module, RCU_RST_REQ);
} }
static int ltq_assert_device(struct reset_controller_dev *rcdev,
unsigned long id)
{
u32 val;
if (id < 8)
return -1;
val = ltq_rcu_r32(RCU_RST_REQ);
val |= BIT(id);
ltq_rcu_w32(val, RCU_RST_REQ);
return 0;
}
static int ltq_deassert_device(struct reset_controller_dev *rcdev,
unsigned long id)
{
u32 val;
if (id < 8)
return -1;
val = ltq_rcu_r32(RCU_RST_REQ);
val &= ~BIT(id);
ltq_rcu_w32(val, RCU_RST_REQ);
return 0;
}
static int ltq_reset_device(struct reset_controller_dev *rcdev,
unsigned long id)
{
ltq_assert_device(rcdev, id);
return ltq_deassert_device(rcdev, id);
}
static struct reset_control_ops reset_ops = {
.reset = ltq_reset_device,
.assert = ltq_assert_device,
.deassert = ltq_deassert_device,
};
static struct reset_controller_dev reset_dev = {
.ops = &reset_ops,
.owner = THIS_MODULE,
.nr_resets = 32,
.of_reset_n_cells = 1,
};
void ltq_rst_init(void)
{
reset_dev.of_node = of_find_compatible_node(NULL, NULL,
"lantiq,xway-reset");
if (!reset_dev.of_node)
pr_err("Failed to find reset controller node");
else
reset_controller_register(&reset_dev);
}
static void ltq_machine_restart(char *command) static void ltq_machine_restart(char *command)
{ {
local_irq_disable(); local_irq_disable();
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment