[PATCH] net: port smc91x to SH4-202 Microdev.

Here is a patch that gets the smc91x driver working on the
SH4-202 Microdev board.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

drivers/net/Kconfig

@@ -819,7 +819,7 @@ config SMC91X
 	tristate "SMC 91C9x/91C1xxx support"
 	select CRC32
 	select MII
-	depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R)
+	depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH)
 	help
 	  This is a driver for SMC's 91x series of Ethernet chipsets,
 	  including the SMC91C94 and the SMC91C111. Say Y if you want it

drivers/net/smc91x.h

@@ -182,6 +182,25 @@ SMC_outw(u16 val, unsigned long ioaddr, int reg)
 #define SMC_insl(a, r, p, l)	readsl((a) + (r), p, l)
 #define SMC_outsl(a, r, p, l)	writesl((a) + (r), p, l)
 
+#elif	defined(CONFIG_SH_SH4202_MICRODEV)
+
+#define SMC_CAN_USE_8BIT	0
+#define SMC_CAN_USE_16BIT	1
+#define SMC_CAN_USE_32BIT	0
+
+#define SMC_inb(a, r)		inb((a) + (r) - 0xa0000000)
+#define SMC_inw(a, r)		inw((a) + (r) - 0xa0000000)
+#define SMC_inl(a, r)		inl((a) + (r) - 0xa0000000)
+#define SMC_outb(v, a, r)	outb(v, (a) + (r) - 0xa0000000)
+#define SMC_outw(v, a, r)	outw(v, (a) + (r) - 0xa0000000)
+#define SMC_outl(v, a, r)	outl(v, (a) + (r) - 0xa0000000)
+#define SMC_insl(a, r, p, l)	insl((a) + (r) - 0xa0000000, p, l)
+#define SMC_outsl(a, r, p, l)	outsl((a) + (r) - 0xa0000000, p, l)
+#define SMC_insw(a, r, p, l)	insw((a) + (r) - 0xa0000000, p, l)
+#define SMC_outsw(a, r, p, l)	outsw((a) + (r) - 0xa0000000, p, l)
+
+#define set_irq_type(irq, type)	do {} while(0)
+
 #elif	defined(CONFIG_ISA)
 
 #define SMC_CAN_USE_8BIT	1