Merge branch 'bpf-bpftool-build-improvements'

Quentin Monnet says:

====================
This set attempts to make it easier to build bpftool, in particular when
passing a specific output directory. This is a follow-up to the
conversation held last month by Lorenz, Ilya and Jakub [0].

The first patch is a minor fix to bpftool's Makefile, regarding the
retrieval of kernel version (which currently prints a non-relevant make
warning on some invocations).

Second patch improves the Makefile commands to support more "make"
invocations, or to fix building with custom output directory. On Jakub's
suggestion, a script is also added to BPF selftests in order to keep track
of the supported build variants.

Building bpftool with "make tools/bpf" from the top of the repository
generates files in "libbpf/" and "feature/" directories under tools/bpf/
and tools/bpf/bpftool/. The third patch ensures such directories are taken
care of on "make clean", and add them to the relevant .gitignore files.

At last, fourth patch is a sligthly modified version of Ilya's fix
regarding libbpf.a appearing twice on the linking command for bpftool.

[0] https://lore.kernel.org/bpf/CACAyw9-CWRHVH3TJ=Tke2x8YiLsH47sLCijdp=V+5M836R9aAA@mail.gmail.com/

v2:
- Return error from check script if one of the make invocations returns
  non-zero (even if binary is successfully produced).
- Run "make clean" from bpf/ and not only bpf/bpftool/ in that same script,
  when relevant.
- Add a patch to clean up generated "feature/" and "libbpf/" directories.
====================
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Lorenz Bauer <lmb@cloudflare.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

tools/bpf/.gitignore

 FEATURE-DUMP.bpf
+feature
 bpf_asm
 bpf_dbg
 bpf_exp.yacc.*

tools/bpf/Makefile

@@ -81,10 +81,11 @@ $(OUTPUT)bpf_exp.lex.o: $(OUTPUT)bpf_exp.lex.c
 
 clean: bpftool_clean
 	$(call QUIET_CLEAN, bpf-progs)
-	$(Q)rm -rf $(OUTPUT)*.o $(OUTPUT)bpf_jit_disasm $(OUTPUT)bpf_dbg \
+	$(Q)$(RM) -r -- $(OUTPUT)*.o $(OUTPUT)bpf_jit_disasm $(OUTPUT)bpf_dbg \
 	       $(OUTPUT)bpf_asm $(OUTPUT)bpf_exp.yacc.* $(OUTPUT)bpf_exp.lex.*
 	$(call QUIET_CLEAN, core-gen)
-	$(Q)rm -f $(OUTPUT)FEATURE-DUMP.bpf
+	$(Q)$(RM) -- $(OUTPUT)FEATURE-DUMP.bpf
+	$(Q)$(RM) -r -- $(OUTPUT)feature
 
 install: $(PROGS) bpftool_install
 	$(call QUIET_INSTALL, bpf_jit_disasm)

tools/bpf/bpftool/.gitignore

@@ -3,3 +3,5 @@
 bpftool*.8
 bpf-helpers.*
 FEATURE-DUMP.bpftool
+feature
+libbpf

tools/bpf/bpftool/Makefile

@@ -17,21 +17,23 @@ endif
 BPF_DIR = $(srctree)/tools/lib/bpf/
 
 ifneq ($(OUTPUT),)
-  BPF_PATH = $(OUTPUT)
+  LIBBPF_OUTPUT = $(OUTPUT)/libbpf/
+  LIBBPF_PATH = $(LIBBPF_OUTPUT)
 else
-  BPF_PATH = $(BPF_DIR)
+  LIBBPF_PATH = $(BPF_DIR)
 endif
 
-LIBBPF = $(BPF_PATH)libbpf.a
+LIBBPF = $(LIBBPF_PATH)libbpf.a
 
-BPFTOOL_VERSION := $(shell make --no-print-directory -sC ../../.. kernelversion)
+BPFTOOL_VERSION := $(shell make -rR --no-print-directory -sC ../../.. kernelversion)
 
 $(LIBBPF): FORCE
-	$(Q)$(MAKE) -C $(BPF_DIR) OUTPUT=$(OUTPUT) $(OUTPUT)libbpf.a
+	$(if $(LIBBPF_OUTPUT),@mkdir -p $(LIBBPF_OUTPUT))
+	$(Q)$(MAKE) -C $(BPF_DIR) OUTPUT=$(LIBBPF_OUTPUT) $(LIBBPF_OUTPUT)libbpf.a
 
 $(LIBBPF)-clean:
 	$(call QUIET_CLEAN, libbpf)
-	$(Q)$(MAKE) -C $(BPF_DIR) OUTPUT=$(OUTPUT) clean >/dev/null
+	$(Q)$(MAKE) -C $(BPF_DIR) OUTPUT=$(LIBBPF_OUTPUT) clean >/dev/null
 
 prefix ?= /usr/local
 bash_compdir ?= /usr/share/bash-completion/completions
@@ -53,7 +55,7 @@ ifneq ($(EXTRA_LDFLAGS),)
 LDFLAGS += $(EXTRA_LDFLAGS)
 endif
 
-LIBS = -lelf -lz $(LIBBPF)
+LIBS = $(LIBBPF) -lelf -lz
 
 INSTALL ?= install
 RM ?= rm -f
@@ -115,16 +117,18 @@ $(OUTPUT)disasm.o: $(srctree)/kernel/bpf/disasm.c
 $(OUTPUT)feature.o: | zdep
 
 $(OUTPUT)bpftool: $(OBJS) $(LIBBPF)
-	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
+	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
 
 $(OUTPUT)%.o: %.c
 	$(QUIET_CC)$(COMPILE.c) -MMD -o $@ $<
 
 clean: $(LIBBPF)-clean
 	$(call QUIET_CLEAN, bpftool)
-	$(Q)$(RM) $(OUTPUT)bpftool $(OUTPUT)*.o $(OUTPUT)*.d
+	$(Q)$(RM) -- $(OUTPUT)bpftool $(OUTPUT)*.o $(OUTPUT)*.d
+	$(Q)$(RM) -r -- $(OUTPUT)libbpf/
 	$(call QUIET_CLEAN, core-gen)
-	$(Q)$(RM) $(OUTPUT)FEATURE-DUMP.bpftool
+	$(Q)$(RM) -- $(OUTPUT)FEATURE-DUMP.bpftool
+	$(Q)$(RM) -r -- $(OUTPUT)feature/
 
 install: $(OUTPUT)bpftool
 	$(call QUIET_INSTALL, bpftool)
@@ -135,8 +139,8 @@ install: $(OUTPUT)bpftool
 
 uninstall:
 	$(call QUIET_UNINST, bpftool)
-	$(Q)$(RM) $(DESTDIR)$(prefix)/sbin/bpftool
-	$(Q)$(RM) $(DESTDIR)$(bash_compdir)/bpftool
+	$(Q)$(RM) -- $(DESTDIR)$(prefix)/sbin/bpftool
+	$(Q)$(RM) -- $(DESTDIR)$(bash_compdir)/bpftool
 
 doc:
 	$(call descend,Documentation)

tools/testing/selftests/bpf/Makefile

@@ -63,7 +63,8 @@ TEST_PROGS := test_kmod.sh \
 	test_tcp_check_syncookie.sh \
 	test_tc_tunnel.sh \
 	test_tc_edt.sh \
-	test_xdping.sh
+	test_xdping.sh \
+	test_bpftool_build.sh
 
 TEST_PROGS_EXTENDED := with_addr.sh \
 	with_tunnels.sh \

tools/testing/selftests/bpf/test_bpftool_build.sh

+#!/bin/bash
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+ERROR=0
+TMPDIR=
+
+# If one build fails, continue but return non-0 on exit.
+return_value() {
+	if [ -d "$TMPDIR" ] ; then
+		rm -rf -- $TMPDIR
+	fi
+	exit $ERROR
+}
+trap return_value EXIT
+
+case $1 in
+	-h|--help)
+		echo -e "$0 [-j <n>]"
+		echo -e "\tTest the different ways of building bpftool."
+		echo -e ""
+		echo -e "\tOptions:"
+		echo -e "\t\t-j <n>:\tPass -j flag to 'make'."
+		exit
+		;;
+esac
+
+J=$*
+
+# Assume script is located under tools/testing/selftests/bpf/. We want to start
+# build attempts from the top of kernel repository.
+SCRIPT_REL_PATH=$(realpath --relative-to=$PWD $0)
+SCRIPT_REL_DIR=$(dirname $SCRIPT_REL_PATH)
+KDIR_ROOT_DIR=$(realpath $PWD/$SCRIPT_REL_DIR/../../../../)
+cd $KDIR_ROOT_DIR
+
+check() {
+	local dir=$(realpath $1)
+
+	echo -n "binary:  "
+	# Returns non-null if file is found (and "false" is run)
+	find $dir -type f -executable -name bpftool -print -exec false {} + && \
+		ERROR=1 && printf "FAILURE: Did not find bpftool\n"
+}
+
+make_and_clean() {
+	echo -e "\$PWD:    $PWD"
+	echo -e "command: make -s $* >/dev/null"
+	make $J -s $* >/dev/null
+	if [ $? -ne 0 ] ; then
+		ERROR=1
+	fi
+	if [ $# -ge 1 ] ; then
+		check ${@: -1}
+	else
+		check .
+	fi
+	(
+		if [ $# -ge 1 ] ; then
+			cd ${@: -1}
+		fi
+		make -s clean
+	)
+	echo
+}
+
+make_with_tmpdir() {
+	local ARGS
+
+	TMPDIR=$(mktemp -d)
+	if [ $# -ge 2 ] ; then
+		ARGS=${@:1:(($# - 1))}
+	fi
+	echo -e "\$PWD:    $PWD"
+	echo -e "command: make -s $ARGS ${@: -1}=$TMPDIR/ >/dev/null"
+	make $J -s $ARGS ${@: -1}=$TMPDIR/ >/dev/null
+	if [ $? -ne 0 ] ; then
+		ERROR=1
+	fi
+	check $TMPDIR
+	rm -rf -- $TMPDIR
+	echo
+}
+
+echo "Trying to build bpftool"
+echo -e "... through kbuild\n"
+
+if [ -f ".config" ] ; then
+	make_and_clean tools/bpf
+
+	## $OUTPUT is overwritten in kbuild Makefile, and thus cannot be passed
+	## down from toplevel Makefile to bpftool's Makefile.
+
+	# make_with_tmpdir tools/bpf OUTPUT
+	echo -e "skip:    make tools/bpf OUTPUT=<dir> (not supported)\n"
+
+	make_with_tmpdir tools/bpf O
+else
+	echo -e "skip:    make tools/bpf (no .config found)\n"
+	echo -e "skip:    make tools/bpf OUTPUT=<dir> (not supported)\n"
+	echo -e "skip:    make tools/bpf O=<dir> (no .config found)\n"
+fi
+
+echo -e "... from kernel source tree\n"
+
+make_and_clean -C tools/bpf/bpftool
+
+make_with_tmpdir -C tools/bpf/bpftool OUTPUT
+
+make_with_tmpdir -C tools/bpf/bpftool O
+
+echo -e "... from tools/\n"
+cd tools/
+
+make_and_clean bpf
+
+## In tools/bpf/Makefile, function "descend" is called and passes $(O) and
+## $(OUTPUT). We would like $(OUTPUT) to have "bpf/bpftool/" appended before
+## calling bpftool's Makefile, but this is not the case as the "descend"
+## function focuses on $(O)/$(subdir). However, in the present case, updating
+## $(O) to have $(OUTPUT) recomputed from it in bpftool's Makefile does not
+## work, because $(O) is not defined from command line and $(OUTPUT) is not
+## updated in tools/scripts/Makefile.include.
+##
+## Workarounds would require to a) edit "descend" or use an alternative way to
+## call bpftool's Makefile, b) modify the conditions to update $(OUTPUT) and
+## other variables in tools/scripts/Makefile.include (at the risk of breaking
+## the build of other tools), or c) append manually the "bpf/bpftool" suffix to
+## $(OUTPUT) in bpf's Makefile, which may break if targets for other directories
+## use "descend" in the future.
+
+# make_with_tmpdir bpf OUTPUT
+echo -e "skip:    make bpf OUTPUT=<dir> (not supported)\n"
+
+make_with_tmpdir bpf O
+
+echo -e "... from bpftool's dir\n"
+cd bpf/bpftool
+
+make_and_clean
+
+make_with_tmpdir OUTPUT
+
+make_with_tmpdir O