Merge tag 'fixes-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Arnd Bergmann says:
 "Another set of arm-soc bug fixes on top of v3.3-rc5.  The few larger
  bits are all for devices that still need to get set up in board code.

  Only three platforms are in this set of fixes: omap2+, pxa and lpc32xx."

* tag 'fixes-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
  ARM: LPC32xx: serial.c: Fixed loop limit
  ARM: LPC32xx: serial.c: HW bug workaround
  ARM: LPC32xx: irq.c: Clear latched event
  ARM: LPC32xx: Fix interrupt controller init
  ARM: LPC32xx: Fix irq on GPI_28
  ARM: OMAP2: fix mailbox init code
  ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators
  ARM: OMAP1: Fix out-of-bounds array access for Innovator
  OMAP3 EVM: remove out-of-bounds array access of gpio_leds
  ARM: OMAP: Fix build error when mmc_omap is built as module
  ARM: OMAP: Fix kernel panic with HSMMC when twl4030_gpio is a module
  pxa/hx4700: add platform device and I2C info for AK4641 codec
  arch/arm/mach-pxa/: included linux/gpio.h twice
  arch/arm/mach-mmp/: some files include some headers twice
  ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe
  ARM: pxa: fix including linux/gpio.h twice
  ARM: pxa: fix mixed declarations and code in sharpsl_pm
  ARM: pxa: fix wrong parsing gpio event on spitz
  ARM: OMAP2+: usb-host: fix compile warning
  ARM: OMAP4: Move the barrier memboclk_steal() as part of reserve callback
  ...

arch/arm/mach-lpc32xx/include/mach/irqs.h

@@ -61,7 +61,7 @@
  */
 #define IRQ_LPC32XX_JTAG_COMM_TX	LPC32XX_SIC1_IRQ(1)
 #define IRQ_LPC32XX_JTAG_COMM_RX	LPC32XX_SIC1_IRQ(2)
-#define IRQ_LPC32XX_GPI_11		LPC32XX_SIC1_IRQ(4)
+#define IRQ_LPC32XX_GPI_28		LPC32XX_SIC1_IRQ(4)
 #define IRQ_LPC32XX_TS_P		LPC32XX_SIC1_IRQ(6)
 #define IRQ_LPC32XX_TS_IRQ		LPC32XX_SIC1_IRQ(7)
 #define IRQ_LPC32XX_TS_AUX		LPC32XX_SIC1_IRQ(8)

arch/arm/mach-lpc32xx/irq.c

@@ -118,6 +118,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
 		.event_group = &lpc32xx_event_pin_regs,
 		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT,
 	},
+	[IRQ_LPC32XX_GPI_28] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT,
+	},
 	[IRQ_LPC32XX_GPIO_00] = {
 		.event_group = &lpc32xx_event_int_regs,
 		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT,
@@ -305,9 +309,18 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state)
 
 		if (state)
 			eventreg |= lpc32xx_events[d->irq].mask;
-		else
+		else {
 			eventreg &= ~lpc32xx_events[d->irq].mask;
 
+			/*
+			 * When disabling the wakeup, clear the latched
+			 * event
+			 */
+			__raw_writel(lpc32xx_events[d->irq].mask,
+				lpc32xx_events[d->irq].
+				event_group->rawstat_reg);
+		}
+
 		__raw_writel(eventreg,
 			lpc32xx_events[d->irq].event_group->enab_reg);
 
@@ -380,13 +393,15 @@ void __init lpc32xx_init_irq(void)
 
 	/* Setup SIC1 */
 	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
-	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
-	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
+	__raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
+	__raw_writel(SIC1_ATR_DEFAULT,
+				LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
 
 	/* Setup SIC2 */
 	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
-	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
-	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
+	__raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
+	__raw_writel(SIC2_ATR_DEFAULT,
+				LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
 
 	/* Configure supported IRQ's */
 	for (i = 0; i < NR_IRQS; i++) {

arch/arm/mach-lpc32xx/serial.c

@@ -88,6 +88,7 @@ struct uartinit {
 	char *uart_ck_name;
 	u32 ck_mode_mask;
 	void __iomem *pdiv_clk_reg;
+	resource_size_t mapbase;
 };
 
 static struct uartinit uartinit_data[] __initdata = {
@@ -97,6 +98,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
+		.mapbase = LPC32XX_UART5_BASE,
 	},
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
@@ -105,6 +107,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
+		.mapbase = LPC32XX_UART3_BASE,
 	},
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
@@ -113,6 +116,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
+		.mapbase = LPC32XX_UART4_BASE,
 	},
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
@@ -121,6 +125,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
+		.mapbase = LPC32XX_UART6_BASE,
 	},
 #endif
 };
@@ -165,11 +170,24 @@ void __init lpc32xx_serial_init(void)
 
 		/* pre-UART clock divider set to 1 */
 		__raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
+
+		/*
+		 * Force a flush of the RX FIFOs to work around a
+		 * HW bug
+		 */
+		puart = uartinit_data[i].mapbase;
+		__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
+		__raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
+		j = LPC32XX_SUART_FIFO_SIZE;
+		while (j--)
+			tmp = __raw_readl(
+				LPC32XX_UART_DLL_FIFO(puart));
+		__raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
 	}
 
 	/* This needs to be done after all UART clocks are setup */
 	__raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
-	for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) {
+	for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
 		/* Force a flush of the RX FIFOs to work around a HW bug */
 		puart = serial_std_platform_data[i].mapbase;
 		__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));

arch/arm/mach-mmp/aspenite.c

@@ -17,7 +17,6 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/interrupt.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-mmp/pxa168.c

@@ -24,7 +24,6 @@
 #include <mach/dma.h>
 #include <mach/devices.h>
 #include <mach/mfp.h>
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <mach/pxa168.h>
 

arch/arm/mach-mmp/tavorevb.c

@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/smc91x.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-omap1/board-innovator.c

@@ -416,13 +416,13 @@ static void __init innovator_init(void)
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		omap1_usb_init(&innovator1510_usb_config);
-		innovator_config[1].data = &innovator1510_lcd_config;
+		innovator_config[0].data = &innovator1510_lcd_config;
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
 	if (cpu_is_omap1610()) {
 		omap1_usb_init(&h2_usb_config);
-		innovator_config[1].data = &innovator1610_lcd_config;
+		innovator_config[0].data = &innovator1610_lcd_config;
 	}
 #endif
 	omap_board_config = innovator_config;

arch/arm/mach-omap2/Kconfig

@@ -364,8 +364,8 @@ config OMAP3_SDRC_AC_TIMING
 	  going on could result in system crashes;
 
 config OMAP4_ERRATA_I688
-	bool "OMAP4 errata: Async Bridge Corruption (BROKEN)"
-	depends on ARCH_OMAP4 && BROKEN
+	bool "OMAP4 errata: Async Bridge Corruption"
+	depends on ARCH_OMAP4
 	select ARCH_HAS_BARRIERS
 	help
 	  If a data is stalled inside asynchronous bridge because of back

arch/arm/mach-omap2/board-n8x0.c

@@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
 	else
 		*openp = 0;
 
+#ifdef CONFIG_MMC_OMAP
 	omap_mmc_notify_cover_event(mmc_device, index, *openp);
+#else
+	pr_warn("MMC: notify cover event not available\n");
+#endif
 }
 
 static int n8x0_mmc_late_init(struct device *dev)

arch/arm/mach-omap2/board-omap3evm.c

@@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
 
 	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+	gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
 	platform_device_register(&leds_gpio);
 

arch/arm/mach-omap2/common.h

@@ -132,6 +132,7 @@ void omap3_map_io(void);
 void am33xx_map_io(void);
 void omap4_map_io(void);
 void ti81xx_map_io(void);
+void omap_barriers_init(void);
 
 /**
  * omap_test_timeout - busy-loop, testing a condition

arch/arm/mach-omap2/cpuidle44xx.c

@@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
 	struct timespec ts_preidle, ts_postidle, ts_idle;
 	u32 cpu1_state;
 	int idle_time;
-	int new_state_idx;
 	int cpu_id = smp_processor_id();
 
 	/* Used to keep track of the total time in idle */
@@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
 	 */
 	cpu1_state = pwrdm_read_pwrst(cpu1_pd);
 	if (cpu1_state != PWRDM_POWER_OFF) {
-		new_state_idx = drv->safe_state_index;
-		cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]);
+		index = drv->safe_state_index;
+		cx = cpuidle_get_statedata(&dev->states_usage[index]);
 	}
 
 	if (index > 0)

arch/arm/mach-omap2/gpmc-smsc911x.c

@@ -19,6 +19,8 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 
 #include <plat/board.h>
 #include <plat/gpmc.h>
@@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = {
 	.flags		= SMSC911X_USE_16BIT,
 };
 
+static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+/* Generic regulator definition to satisfy smsc911x */
+static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(gpmc_smsc911x_supply),
+	.consumer_supplies	= gpmc_smsc911x_supply,
+};
+
+static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
+	.supply_name		= "gpmc_smsc911x",
+	.microvolts		= 3300000,
+	.gpio			= -EINVAL,
+	.startup_delay		= 0,
+	.enable_high		= 0,
+	.enabled_at_boot	= 1,
+	.init_data		= &gpmc_smsc911x_reg_init_data,
+};
+
+/*
+ * Platform device id of 42 is a temporary fix to avoid conflicts
+ * with other reg-fixed-voltage devices. The real fix should
+ * involve the driver core providing a way of dynamically
+ * assigning a unique id on registration for platform devices
+ * in the same name space.
+ */
+static struct platform_device gpmc_smsc911x_regulator = {
+	.name		= "reg-fixed-voltage",
+	.id		= 42,
+	.dev = {
+		.platform_data	= &gpmc_smsc911x_fixed_reg_data,
+	},
+};
+
 /*
  * Initialize smsc911x device connected to the GPMC. Note that we
  * assume that pin multiplexing is done in the board-*.c file,
@@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
 
 	gpmc_cfg = board_data;
 
+	ret = platform_device_register(&gpmc_smsc911x_regulator);
+	if (ret < 0) {
+		pr_err("Unable to register smsc911x regulators: %d\n", ret);
+		return;
+	}
+
 	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
 		pr_err("Failed to request GPMC mem region\n");
 		return;

arch/arm/mach-omap2/hsmmc.c

@@ -428,6 +428,7 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	return 0;
 }
 
+static int omap_hsmmc_done;
 #define MAX_OMAP_MMC_HWMOD_NAME_LEN		16
 
 void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
@@ -491,6 +492,11 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 {
 	u32 reg;
 
+	if (omap_hsmmc_done)
+		return;
+
+	omap_hsmmc_done = 1;
+
 	if (!cpu_is_omap44xx()) {
 		if (cpu_is_omap2430()) {
 			control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;

arch/arm/mach-omap2/io.c

@@ -307,6 +307,7 @@ void __init omapam33xx_map_common_io(void)
 void __init omap44xx_map_common_io(void)
 {
 	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+	omap_barriers_init();
 }
 #endif
 

arch/arm/mach-omap2/mailbox.c

@@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = {
 	.ops	= &omap2_mbox_ops,
 	.priv	= &omap2_mbox_iva_priv,
 };
+#endif
 
-struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL };
+#ifdef CONFIG_ARCH_OMAP2
+struct omap_mbox *omap2_mboxes[] = {
+	&mbox_dsp_info,
+#ifdef CONFIG_SOC_OMAP2420
+	&mbox_iva_info,
+#endif
+	NULL
+};
 #endif
 
 #if defined(CONFIG_ARCH_OMAP4)

arch/arm/mach-omap2/mux.c

@@ -218,7 +218,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition,
 	return -ENODEV;
 }
 
-static int __init
+static int
 omap_mux_get_by_name(const char *muxname,
 			struct omap_mux_partition **found_partition,
 			struct omap_mux **found_mux)

arch/arm/mach-omap2/omap4-common.c

@@ -24,6 +24,7 @@
 
 #include <plat/irqs.h>
 #include <plat/sram.h>
+#include <plat/omap-secure.h>
 
 #include <mach/hardware.h>
 #include <mach/omap-wakeupgen.h>
@@ -43,6 +44,9 @@ static void __iomem *sar_ram_base;
 
 void __iomem *dram_sync, *sram_sync;
 
+static phys_addr_t paddr;
+static u32 size;
+
 void omap_bus_sync(void)
 {
 	if (dram_sync && sram_sync) {
@@ -52,18 +56,20 @@ void omap_bus_sync(void)
 	}
 }
 
-static int __init omap_barriers_init(void)
+/* Steal one page physical memory for barrier implementation */
+int __init omap_barrier_reserve_memblock(void)
 {
-	struct map_desc dram_io_desc[1];
-	phys_addr_t paddr;
-	u32 size;
-
-	if (!cpu_is_omap44xx())
-		return -ENODEV;
 
 	size = ALIGN(PAGE_SIZE, SZ_1M);
 	paddr = arm_memblock_steal(size, SZ_1M);
 
+	return 0;
+}
+
+void __init omap_barriers_init(void)
+{
+	struct map_desc dram_io_desc[1];
+
 	dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
 	dram_io_desc[0].pfn = __phys_to_pfn(paddr);
 	dram_io_desc[0].length = size;
@@ -75,9 +81,10 @@ static int __init omap_barriers_init(void)
 	pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
 		(long long) paddr, dram_io_desc[0].virtual);
 
-	return 0;
 }
-core_initcall(omap_barriers_init);
+#else
+void __init omap_barriers_init(void)
+{}
 #endif
 
 void __init gic_init_irq(void)

arch/arm/mach-omap2/pm.c

@@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 	freq = clk->rate;
 	clk_put(clk);
 
+	rcu_read_lock();
 	opp = opp_find_freq_ceil(dev, &freq);
 	if (IS_ERR(opp)) {
+		rcu_read_unlock();
 		pr_err("%s: unable to find boot up OPP for vdd_%s\n",
 			__func__, vdd_name);
 		goto exit;
 	}
 
 	bootup_volt = opp_get_voltage(opp);
+	rcu_read_unlock();
 	if (!bootup_volt) {
 		pr_err("%s: unable to find voltage corresponding "
 			"to the bootup OPP for vdd_%s\n", __func__, vdd_name);

arch/arm/mach-omap2/usb-host.c

@@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 {
 	struct omap_hwmod	*oh[2];
-	struct omap_device	*od;
+	struct platform_device	*pdev;
 	int			bus_id = -1;
 	int			i;
 
@@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 		return;
 	}
 
-	od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
+	pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
 				(void *)&usbhs_data, sizeof(usbhs_data),
 				omap_uhhtll_latency,
 				ARRAY_SIZE(omap_uhhtll_latency), false);
-	if (IS_ERR(od)) {
+	if (IS_ERR(pdev)) {
 		pr_err("Could not build hwmod devices %s,%s\n",
 			USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
 		return;

arch/arm/mach-pxa/hx4700.c

@@ -45,6 +45,7 @@
 #include <mach/hx4700.h>
 #include <mach/irda.h>
 
+#include <sound/ak4641.h>
 #include <video/platform_lcd.h>
 #include <video/w100fb.h>
 
@@ -764,6 +765,28 @@ static struct i2c_board_info __initdata pi2c_board_info[] = {
 	},
 };
 
+/*
+ * Asahi Kasei AK4641 on I2C
+ */
+
+static struct ak4641_platform_data ak4641_info = {
+	.gpio_power = GPIO27_HX4700_CODEC_ON,
+	.gpio_npdn  = GPIO109_HX4700_CODEC_nPDN,
+};
+
+static struct i2c_board_info i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("ak4641", 0x12),
+		.platform_data = &ak4641_info,
+	},
+};
+
+static struct platform_device audio = {
+	.name	= "hx4700-audio",
+	.id	= -1,
+};
+
+
 /*
  * PCMCIA
  */
@@ -790,6 +813,7 @@ static struct platform_device *devices[] __initdata = {
 	&gpio_vbus,
 	&power_supply,
 	&strataflash,
+	&audio,
 	&pcmcia,
 };
 
@@ -827,6 +851,7 @@ static void __init hx4700_init(void)
 	pxa_set_ficp_info(&ficp_info);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
 	i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
 	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
 	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));

arch/arm/mach-pxa/pxa25x.c

@@ -25,7 +25,6 @@
 #include <linux/suspend.h>
 #include <linux/syscore_ops.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 #include <asm/suspend.h>

arch/arm/mach-pxa/pxa27x.c

@@ -22,7 +22,6 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 #include <mach/hardware.h>

arch/arm/mach-pxa/saarb.c

@@ -15,7 +15,6 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/mfd/88pm860x.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-pxa/sharpsl_pm.c

@@ -168,6 +168,7 @@ struct battery_thresh sharpsl_battery_levels_noac[] = {
 #define MAXCTRL_SEL_SH   4
 #define MAXCTRL_STR      (1u << 7)
 
+extern int max1111_read_channel(int);
 /*
  * Read MAX1111 ADC
  */
@@ -177,8 +178,6 @@ int sharpsl_pm_pxa_read_max1111(int channel)
 	if (machine_is_tosa())
 	    return 0;
 
-	extern int max1111_read_channel(int);
-
 	/* max1111 accepts channels from 0-3, however,
 	 * it is encoded from 0-7 here in the code.
 	 */

arch/arm/mach-pxa/spitz_pm.c

@@ -172,10 +172,9 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
 static unsigned long spitz_charger_wakeup(void)
 {
 	unsigned long ret;
-	ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT)
+	ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT)
 		<< GPIO_bit(SPITZ_GPIO_KEY_INT))
-		| (!gpio_get_value(SPITZ_GPIO_SYNC)
-		<< GPIO_bit(SPITZ_GPIO_SYNC));
+		| gpio_get_value(SPITZ_GPIO_SYNC));
 	return ret;
 }
 

arch/arm/plat-omap/common.c

@@ -69,6 +69,7 @@ void __init omap_reserve(void)
 	omap_vram_reserve_sdram_memblock();
 	omap_dsp_reserve_sdram_memblock();
 	omap_secure_ram_reserve_memblock();
+	omap_barrier_reserve_memblock();
 }
 
 void __init omap_init_consistent_dma_size(void)

arch/arm/plat-omap/include/plat/omap-secure.h

@@ -10,4 +10,10 @@ static inline void omap_secure_ram_reserve_memblock(void)
 { }
 #endif
 
+#ifdef CONFIG_OMAP4_ERRATA_I688
+extern int omap_barrier_reserve_memblock(void);
+#else
+static inline void omap_barrier_reserve_memblock(void)
+{ }
+#endif
 #endif /* __OMAP_SECURE_H__ */

drivers/pcmcia/pxa2xx_base.c

@@ -328,21 +328,15 @@ static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev)
 			goto err1;
 	}
 
-	if (ret) {
-		while (--i >= 0)
-			soc_pcmcia_remove_one(&sinfo->skt[i]);
-		kfree(sinfo);
-		clk_put(clk);
-	} else {
-		pxa2xx_configure_sockets(&dev->dev);
-		dev_set_drvdata(&dev->dev, sinfo);
-	}
+	pxa2xx_configure_sockets(&dev->dev);
+	dev_set_drvdata(&dev->dev, sinfo);
 
 	return 0;
 
 err1:
 	while (--i >= 0)
 		soc_pcmcia_remove_one(&sinfo->skt[i]);
+	clk_put(clk);
 	kfree(sinfo);
 err0:
 	return ret;