Commit c62625b6 authored by Ryan Hsu's avatar Ryan Hsu Committed by Greg Kroah-Hartman

ath10k: fix incorrect wlan_mac_base in qca6174_regs

commit 6be3b6cc upstream.

In the 'commit ebee76f7 ("ath10k: allow setting coverage class")',
it inherits the design and the address offset from ath9k, but the address
is not applicable to QCA6174, which leads to a random crash while doing the
resume() operation, since the set_coverage_class.ops will be called from
ieee80211_reconfig() when resume() (if the wow is not configured).

Fix the incorrect address offset here to avoid the random crash.

Verified on QCA6174/hw3.0 with firmware WLAN.RM.4.4-00022-QCARMSWPZ-2.

kvalo: this also seems to fix a regression with firmware restart.

Fixes: ebee76f7 ("ath10k: allow setting coverage class")
Signed-off-by: default avatarRyan Hsu <ryanhsu@qca.qualcomm.com>
Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 2f69745c
...@@ -51,7 +51,7 @@ const struct ath10k_hw_regs qca6174_regs = { ...@@ -51,7 +51,7 @@ const struct ath10k_hw_regs qca6174_regs = {
.rtc_soc_base_address = 0x00000800, .rtc_soc_base_address = 0x00000800,
.rtc_wmac_base_address = 0x00001000, .rtc_wmac_base_address = 0x00001000,
.soc_core_base_address = 0x0003a000, .soc_core_base_address = 0x0003a000,
.wlan_mac_base_address = 0x00020000, .wlan_mac_base_address = 0x00010000,
.ce_wrapper_base_address = 0x00034000, .ce_wrapper_base_address = 0x00034000,
.ce0_base_address = 0x00034400, .ce0_base_address = 0x00034400,
.ce1_base_address = 0x00034800, .ce1_base_address = 0x00034800,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment