Commit c630c176 authored by Stephan Gerhold's avatar Stephan Gerhold Committed by Jonathan Cameron

iio: accel: kxcjk-1013: Add support for KX023-1025

The KX023-1025 accelerometer [1] seems to be some mixture of
KXCJK and KXTF9. It has the motion interrupt functionality from KXCJK
but also the tap detection from KXTF9, and a lot more functionality.

The configuration register map seems fairly different at first,
but actually all register bits used by the kxcjk-1013 driver are
available at the same bit positions on KX023-1025. It's just quite
misleading because:

  1. The registers have entirely different names and are at different
     addresses, but the bits are mostly named the same (and mean the same).
  2. There are many more registers and bits used that are reserved on KXCJK
     to enable additional functionality.

Ignoring all additionally available functionality for now, the KX023
works just fine after setting up the struct with the correct register
addresses. The only difference that needs to be handled additionally
is that the KX023 supports two configurable interrupt lines (INT1/2).

For now only INT1 is supported so we route all interrupts used by
the driver there.

[1]: https://kionixfs.azureedge.net/en/datasheet/KX023-1025%20Specifications%20Rev%2012.0.pdf

Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarStephan Gerhold <stephan@gerhold.net>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent ae4467f6
...@@ -79,6 +79,45 @@ ...@@ -79,6 +79,45 @@
#define KXTF9_REG_HYST_SET 0x5F #define KXTF9_REG_HYST_SET 0x5F
#define KXCJK1013_REG_WAKE_THRES 0x6A #define KXCJK1013_REG_WAKE_THRES 0x6A
/* Everything up to 0x11 is equal to KXCJK1013/KXTF9 above */
#define KX023_REG_INS1 0x12
#define KX023_REG_INS2 0x13
#define KX023_REG_INS3 0x14
#define KX023_REG_STAT 0x15
#define KX023_REG_INT_REL 0x17
#define KX023_REG_CNTL1 0x18
#define KX023_REG_CNTL2 0x19
#define KX023_REG_CNTL3 0x1A
#define KX023_REG_ODCNTL 0x1B
#define KX023_REG_INC1 0x1C
#define KX023_REG_INC2 0x1D
#define KX023_REG_INC3 0x1E
#define KX023_REG_INC4 0x1F
#define KX023_REG_INC5 0x20
#define KX023_REG_INC6 0x21
#define KX023_REG_TILT_TIMER 0x22
#define KX023_REG_WUFC 0x23
#define KX023_REG_TDTRC 0x24
#define KX023_REG_TDTC 0x25
#define KX023_REG_TTH 0x26
#define KX023_REG_TTL 0x27
#define KX023_REG_FTD 0x28
#define KX023_REG_STD 0x29
#define KX023_REG_TLT 0x2A
#define KX023_REG_TWS 0x2B
#define KX023_REG_ATH 0x30
#define KX023_REG_TILT_ANGLE_LL 0x32
#define KX023_REG_TILT_ANGLE_HL 0x33
#define KX023_REG_HYST_SET 0x34
#define KX023_REG_LP_CNTL 0x35
#define KX023_REG_BUF_CNTL1 0x3A
#define KX023_REG_BUF_CNTL2 0x3B
#define KX023_REG_BUF_STATUS_1 0x3C
#define KX023_REG_BUF_STATUS_2 0x3D
#define KX023_REG_BUF_CLEAR 0x3E
#define KX023_REG_BUF_READ 0x3F
#define KX023_REG_SELF_TEST 0x60
#define KXCJK1013_REG_CTRL1_BIT_PC1 BIT(7) #define KXCJK1013_REG_CTRL1_BIT_PC1 BIT(7)
#define KXCJK1013_REG_CTRL1_BIT_RES BIT(6) #define KXCJK1013_REG_CTRL1_BIT_RES BIT(6)
#define KXCJK1013_REG_CTRL1_BIT_DRDY BIT(5) #define KXCJK1013_REG_CTRL1_BIT_DRDY BIT(5)
...@@ -119,6 +158,14 @@ ...@@ -119,6 +158,14 @@
#define KXCJK1013_REG_INT_SRC2_BIT_XP BIT(4) #define KXCJK1013_REG_INT_SRC2_BIT_XP BIT(4)
#define KXCJK1013_REG_INT_SRC2_BIT_XN BIT(5) #define KXCJK1013_REG_INT_SRC2_BIT_XN BIT(5)
/* KX023 interrupt routing to INT1. INT2 can be configured with INC6 */
#define KX023_REG_INC4_BFI1 BIT(6)
#define KX023_REG_INC4_WMI1 BIT(5)
#define KX023_REG_INC4_DRDY1 BIT(4)
#define KX023_REG_INC4_TDTI1 BIT(2)
#define KX023_REG_INC4_WUFI1 BIT(1)
#define KX023_REG_INC4_TPI1 BIT(0)
#define KXCJK1013_DEFAULT_WAKE_THRES 1 #define KXCJK1013_DEFAULT_WAKE_THRES 1
enum kx_chipset { enum kx_chipset {
...@@ -126,6 +173,7 @@ enum kx_chipset { ...@@ -126,6 +173,7 @@ enum kx_chipset {
KXCJ91008, KXCJ91008,
KXTJ21009, KXTJ21009,
KXTF9, KXTF9,
KX0231025,
KX_MAX_CHIPS /* this must be last */ KX_MAX_CHIPS /* this must be last */
}; };
...@@ -172,6 +220,19 @@ static const struct kx_chipset_regs kxtf9_regs = { ...@@ -172,6 +220,19 @@ static const struct kx_chipset_regs kxtf9_regs = {
.wake_thres = KXTF9_REG_WAKE_THRESH, .wake_thres = KXTF9_REG_WAKE_THRESH,
}; };
/* The registers have totally different names but the bits are compatible */
static const struct kx_chipset_regs kx0231025_regs = {
.int_src1 = KX023_REG_INS2,
.int_src2 = KX023_REG_INS3,
.int_rel = KX023_REG_INT_REL,
.ctrl1 = KX023_REG_CNTL1,
.wuf_ctrl = KX023_REG_CNTL3,
.int_ctrl1 = KX023_REG_INC1,
.data_ctrl = KX023_REG_ODCNTL,
.wake_timer = KX023_REG_WUFC,
.wake_thres = KX023_REG_ATH,
};
struct kxcjk1013_data { struct kxcjk1013_data {
struct regulator_bulk_data regulators[2]; struct regulator_bulk_data regulators[2];
struct i2c_client *client; struct i2c_client *client;
...@@ -308,6 +369,22 @@ static const struct { ...@@ -308,6 +369,22 @@ static const struct {
{0x05, 5100}, {0x05, 5100},
{0x06, 2700}, {0x06, 2700},
}, },
/* KX023-1025 */
{
/* First 4 are not in datasheet, taken from KXCTJ2-1009 */
{0x08, 1240000},
{0x09, 621000},
{0x0A, 309000},
{0x0B, 151000},
{0, 81000},
{0x01, 40000},
{0x02, 22000},
{0x03, 12000},
{0x04, 7000},
{0x05, 4400},
{0x06, 3000},
{0x07, 3000},
},
}; };
static const struct { static const struct {
...@@ -483,6 +560,17 @@ static int kxcjk1013_chip_init(struct kxcjk1013_data *data) ...@@ -483,6 +560,17 @@ static int kxcjk1013_chip_init(struct kxcjk1013_data *data)
return ret; return ret;
} }
/* On KX023, route all used interrupts to INT1 for now */
if (data->chipset == KX0231025 && data->client->irq > 0) {
ret = i2c_smbus_write_byte_data(data->client, KX023_REG_INC4,
KX023_REG_INC4_DRDY1 |
KX023_REG_INC4_WUFI1);
if (ret < 0) {
dev_err(&data->client->dev, "Error writing reg_inc4\n");
return ret;
}
}
ret = kxcjk1013_set_mode(data, OPERATION); ret = kxcjk1013_set_mode(data, OPERATION);
if (ret < 0) if (ret < 0)
return ret; return ret;
...@@ -1414,6 +1502,9 @@ static int kxcjk1013_probe(struct i2c_client *client, ...@@ -1414,6 +1502,9 @@ static int kxcjk1013_probe(struct i2c_client *client,
case KXTF9: case KXTF9:
data->regs = &kxtf9_regs; data->regs = &kxtf9_regs;
break; break;
case KX0231025:
data->regs = &kx0231025_regs;
break;
default: default:
return -EINVAL; return -EINVAL;
} }
...@@ -1633,6 +1724,7 @@ static const struct i2c_device_id kxcjk1013_id[] = { ...@@ -1633,6 +1724,7 @@ static const struct i2c_device_id kxcjk1013_id[] = {
{"kxcj91008", KXCJ91008}, {"kxcj91008", KXCJ91008},
{"kxtj21009", KXTJ21009}, {"kxtj21009", KXTJ21009},
{"kxtf9", KXTF9}, {"kxtf9", KXTF9},
{"kx023-1025", KX0231025},
{"SMO8500", KXCJ91008}, {"SMO8500", KXCJ91008},
{} {}
}; };
...@@ -1644,6 +1736,7 @@ static const struct of_device_id kxcjk1013_of_match[] = { ...@@ -1644,6 +1736,7 @@ static const struct of_device_id kxcjk1013_of_match[] = {
{ .compatible = "kionix,kxcj91008", }, { .compatible = "kionix,kxcj91008", },
{ .compatible = "kionix,kxtj21009", }, { .compatible = "kionix,kxtj21009", },
{ .compatible = "kionix,kxtf9", }, { .compatible = "kionix,kxtf9", },
{ .compatible = "kionix,kx023-1025", },
{ } { }
}; };
MODULE_DEVICE_TABLE(of, kxcjk1013_of_match); MODULE_DEVICE_TABLE(of, kxcjk1013_of_match);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment