[PATCH] more arch typo/illegal->invalid fixes

(Steven Cole)

arch/ia64/hp/common/sba_iommu.c

@@ -1125,7 +1125,7 @@ sba_fill_pdir(
  * in the DMA stream. Allocates PDIR entries but does not fill them.
  * Returns the number of DMA chunks.
  *
- * Doing the fill seperate from the coalescing/allocation keeps the
+ * Doing the fill separate from the coalescing/allocation keeps the
  * code simpler. Future enhancement could make one pass through
  * the sglist do both.
  */

arch/mips64/mm/fault.c

@@ -163,7 +163,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
 		tsk->thread.cp0_badvaddr = address;
 		tsk->thread.error_code = write;
 #if 0
-		printk("do_page_fault() #2: sending SIGSEGV to %s for illegal %s\n"
+		printk("do_page_fault() #2: sending SIGSEGV to %s for invalid %s\n"
 		       "%08lx (epc == %08lx, ra == %08lx)\n",
 		       tsk->comm,
 		       write ? "write access to" : "read access from",

arch/ppc/8xx_io/cs4218_tdm.c

@@ -2696,24 +2696,24 @@ void __init dmasound_setup(char *str, int *ints)
 	switch (ints[0]) {
 	case 3:
 		if ((ints[3] < 0) || (ints[3] > MAX_CATCH_RADIUS))
-			printk("dmasound_setup: illegal catch radius, using default = %d\n", catchRadius);
+			printk("dmasound_setup: invalid catch radius, using default = %d\n", catchRadius);
 		else
 			catchRadius = ints[3];
 		/* fall through */
 	case 2:
 		if (ints[1] < MIN_BUFFERS)
-			printk("dmasound_setup: illegal number of buffers, using default = %d\n", numBufs);
+			printk("dmasound_setup: invalid number of buffers, using default = %d\n", numBufs);
 		else
 			numBufs = ints[1];
 		if (ints[2] < MIN_BUFSIZE || ints[2] > MAX_BUFSIZE)
-			printk("dmasound_setup: illegal buffer size, using default = %d\n", bufSize);
+			printk("dmasound_setup: invalid buffer size, using default = %d\n", bufSize);
 		else
 			bufSize = ints[2];
 		break;
 	case 0:
 		break;
 	default:
-		printk("dmasound_setup: illegal number of arguments\n");
+		printk("dmasound_setup: invalid number of arguments\n");
 	}
 }
 

arch/ppc/boot/openfirmware/Makefile

@@ -50,7 +50,7 @@ endif
 
 $(images)/ramdisk.image.gz:
 	@echo '  MISSING $@'
-	@echo '          RAM disk image must be provided seperatly'
+	@echo '          RAM disk image must be provided separately'
 	@/bin/false
 
 objcpxmon-$(CONFIG_XMON) := --add-section=.sysmap=System.map \

arch/ppc/syslib/open_pic.c

@@ -133,16 +133,16 @@ struct hw_interrupt_type open_pic_ipi = {
 #if 1
 #define check_arg_ipi(ipi) \
     if (ipi < 0 || ipi >= OPENPIC_NUM_IPI) \
-	printk("open_pic.c:%d: illegal ipi %d\n", __LINE__, ipi);
+	printk("open_pic.c:%d: invalid ipi %d\n", __LINE__, ipi);
 #define check_arg_timer(timer) \
     if (timer < 0 || timer >= OPENPIC_NUM_TIMERS) \
-	printk("open_pic.c:%d: illegal timer %d\n", __LINE__, timer);
+	printk("open_pic.c:%d: invalid timer %d\n", __LINE__, timer);
 #define check_arg_vec(vec) \
     if (vec < 0 || vec >= OPENPIC_NUM_VECTORS) \
-	printk("open_pic.c:%d: illegal vector %d\n", __LINE__, vec);
+	printk("open_pic.c:%d: invalid vector %d\n", __LINE__, vec);
 #define check_arg_pri(pri) \
     if (pri < 0 || pri >= OPENPIC_NUM_PRI) \
-	printk("open_pic.c:%d: illegal priority %d\n", __LINE__, pri);
+	printk("open_pic.c:%d: invalid priority %d\n", __LINE__, pri);
 /*
  * Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's
  * data has probably been corrupted and we're going to panic or deadlock later
@@ -151,11 +151,11 @@ struct hw_interrupt_type open_pic_ipi = {
 #define check_arg_irq(irq) \
     if (irq < open_pic_irq_offset || irq >= NumSources+open_pic_irq_offset \
 	|| ISR[irq - open_pic_irq_offset] == 0) { \
-      printk("open_pic.c:%d: illegal irq %d\n", __LINE__, irq); \
+      printk("open_pic.c:%d: invalid irq %d\n", __LINE__, irq); \
       dump_stack(); }
 #define check_arg_cpu(cpu) \
     if (cpu < 0 || cpu >= NumProcessors){ \
-	printk("open_pic.c:%d: illegal cpu %d\n", __LINE__, cpu); \
+	printk("open_pic.c:%d: invalid cpu %d\n", __LINE__, cpu); \
 	dump_stack(); }
 #else
 #define check_arg_ipi(ipi)	do {} while (0)

arch/ppc64/kernel/open_pic.c

@@ -96,16 +96,16 @@ unsigned int openpic_vec_spurious;
 #if 0
 #define check_arg_ipi(ipi) \
     if (ipi < 0 || ipi >= OPENPIC_NUM_IPI) \
-	printk(KERN_ERR "open_pic.c:%d: illegal ipi %d\n", __LINE__, ipi);
+	printk(KERN_ERR "open_pic.c:%d: invalid ipi %d\n", __LINE__, ipi);
 #define check_arg_timer(timer) \
     if (timer < 0 || timer >= OPENPIC_NUM_TIMERS) \
-	printk(KERN_ERR "open_pic.c:%d: illegal timer %d\n", __LINE__, timer);
+	printk(KERN_ERR "open_pic.c:%d: invalid timer %d\n", __LINE__, timer);
 #define check_arg_vec(vec) \
     if (vec < 0 || vec >= OPENPIC_NUM_VECTORS) \
-	printk(KERN_ERR "open_pic.c:%d: illegal vector %d\n", __LINE__, vec);
+	printk(KERN_ERR "open_pic.c:%d: invalid vector %d\n", __LINE__, vec);
 #define check_arg_pri(pri) \
     if (pri < 0 || pri >= OPENPIC_NUM_PRI) \
-	printk(KERN_ERR "open_pic.c:%d: illegal priority %d\n", __LINE__, pri);
+	printk(KERN_ERR "open_pic.c:%d: invalid priority %d\n", __LINE__, pri);
 /*
  * Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's
  * data has probably been corrupted and we're going to panic or deadlock later
@@ -113,11 +113,11 @@ unsigned int openpic_vec_spurious;
  */
 #define check_arg_irq(irq) \
     if (irq < open_pic_irq_offset || irq >= (NumSources+open_pic_irq_offset)){ \
-      printk(KERN_ERR "open_pic.c:%d: illegal irq %d\n", __LINE__, irq); \
+      printk(KERN_ERR "open_pic.c:%d: invalid irq %d\n", __LINE__, irq); \
       dump_stack(); }
 #define check_arg_cpu(cpu) \
     if (cpu < 0 || cpu >= OPENPIC_MAX_PROCESSORS){ \
-	printk(KERN_ERR "open_pic.c:%d: illegal cpu %d\n", __LINE__, cpu); \
+	printk(KERN_ERR "open_pic.c:%d: invalid cpu %d\n", __LINE__, cpu); \
 	dump_stack(); }
 #else
 #define check_arg_ipi(ipi)	do {} while (0)

arch/sh/mm/cache-sh2.c

@@ -62,7 +62,7 @@ int __init detect_cpu_and_cache_system(void)
 	cpu_data->dcache.flags		= 0;
 
 	/*
-	 * SH-2 doesn't have seperate caches
+	 * SH-2 doesn't have separate caches
 	 */
 	cpu_data->dcache.flags |= SH_CACHE_COMBINED;
 	cpu_data->icache = cpu_data->dcache;

arch/sh/mm/cache-sh3.c

@@ -78,7 +78,7 @@ detect_cpu_and_cache_system(void)
 	}
 
 		/*
-	 * SH-3 doesn't have seperate caches
+	 * SH-3 doesn't have separate caches
 		 */
 	cpu_data->dcache.flags |= SH_CACHE_COMBINED;
 	cpu_data->icache = cpu_data->dcache;