Commit c63580b2 authored by Christian Marangi's avatar Christian Marangi Committed by Lee Jones

leds: leds-lp55xx: Generalize led_brightness function

Generalize led_brightness function as the implementation is the same for
most of the lp55xx based LED driver.

Introduce a new option in device_config, reg_led_pwm_base since the reg
value is not the same for every LED chip.
Suggested-by: default avatarLee Jones <lee@kernel.org>
Signed-off-by: default avatarChristian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-11-ansuelsmth@gmail.comSigned-off-by: default avatarLee Jones <lee@kernel.org>
parent a3df1906
......@@ -241,19 +241,6 @@ static int lp5521_multicolor_brightness(struct lp55xx_led *led)
return ret;
}
static int lp5521_led_brightness(struct lp55xx_led *led)
{
struct lp55xx_chip *chip = led->chip;
int ret;
mutex_lock(&chip->lock);
ret = lp55xx_write(chip, LP5521_REG_LED_PWM_BASE + led->chan_nr,
led->brightness);
mutex_unlock(&chip->lock);
return ret;
}
static ssize_t show_engine_mode(struct device *dev,
struct device_attribute *attr,
char *buf, int nr)
......@@ -388,9 +375,12 @@ static struct lp55xx_device_config lp5521_cfg = {
.prog_mem_base = {
.addr = LP5521_REG_R_PROG_MEM,
},
.reg_led_pwm_base = {
.addr = LP5521_REG_LED_PWM_BASE,
},
.max_channel = LP5521_MAX_LEDS,
.post_init_device = lp5521_post_init_device,
.brightness_fn = lp5521_led_brightness,
.brightness_fn = lp55xx_led_brightness,
.multicolor_brightness_fn = lp5521_multicolor_brightness,
.set_led_current = lp5521_set_led_current,
.firmware_cb = lp55xx_firmware_loaded_cb,
......
......@@ -683,18 +683,6 @@ static int lp5523_multicolor_brightness(struct lp55xx_led *led)
return ret;
}
static int lp5523_led_brightness(struct lp55xx_led *led)
{
struct lp55xx_chip *chip = led->chip;
int ret;
mutex_lock(&chip->lock);
ret = lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + led->chan_nr,
led->brightness);
mutex_unlock(&chip->lock);
return ret;
}
static LP55XX_DEV_ATTR_RW(engine1_mode, show_engine1_mode, store_engine1_mode);
static LP55XX_DEV_ATTR_RW(engine2_mode, show_engine2_mode, store_engine2_mode);
static LP55XX_DEV_ATTR_RW(engine3_mode, show_engine3_mode, store_engine3_mode);
......@@ -759,10 +747,13 @@ static struct lp55xx_device_config lp5523_cfg = {
.prog_mem_base = {
.addr = LP5523_REG_PROG_MEM,
},
.reg_led_pwm_base = {
.addr = LP5523_REG_LED_PWM_BASE,
},
.pages_per_engine = LP5523_PAGES_PER_ENGINE,
.max_channel = LP5523_MAX_LEDS,
.post_init_device = lp5523_post_init_device,
.brightness_fn = lp5523_led_brightness,
.brightness_fn = lp55xx_led_brightness,
.multicolor_brightness_fn = lp5523_multicolor_brightness,
.set_led_current = lp5523_set_led_current,
.firmware_cb = lp55xx_firmware_loaded_cb,
......
......@@ -242,6 +242,20 @@ void lp55xx_firmware_loaded_cb(struct lp55xx_chip *chip)
}
EXPORT_SYMBOL_GPL(lp55xx_firmware_loaded_cb);
int lp55xx_led_brightness(struct lp55xx_led *led)
{
struct lp55xx_chip *chip = led->chip;
const struct lp55xx_device_config *cfg = chip->cfg;
int ret;
mutex_lock(&chip->lock);
ret = lp55xx_write(chip, cfg->reg_led_pwm_base.addr + led->chan_nr,
led->brightness);
mutex_unlock(&chip->lock);
return ret;
}
EXPORT_SYMBOL_GPL(lp55xx_led_brightness);
static void lp55xx_reset_device(struct lp55xx_chip *chip)
{
const struct lp55xx_device_config *cfg = chip->cfg;
......
......@@ -100,6 +100,7 @@ struct lp55xx_reg {
* @reset : Chip specific reset command
* @enable : Chip specific enable command
* @prog_mem_base : Chip specific base reg address for chip SMEM programming
* @reg_led_pwm_base : Chip specific base reg address for LED PWM conf
* @pages_per_engine : Assigned pages for each engine
* (if not set chip doesn't support pages)
* @max_channel : Maximum number of channels
......@@ -118,6 +119,7 @@ struct lp55xx_device_config {
const struct lp55xx_reg reset;
const struct lp55xx_reg enable;
const struct lp55xx_reg prog_mem_base;
const struct lp55xx_reg reg_led_pwm_base;
const int pages_per_engine;
const int max_channel;
......@@ -213,6 +215,7 @@ extern int lp55xx_run_engine_common(struct lp55xx_chip *chip);
extern int lp55xx_update_program_memory(struct lp55xx_chip *chip,
const u8 *data, size_t size);
extern void lp55xx_firmware_loaded_cb(struct lp55xx_chip *chip);
extern int lp55xx_led_brightness(struct lp55xx_led *led);
/* common probe/remove function */
extern int lp55xx_probe(struct i2c_client *client);
......
......@@ -137,19 +137,6 @@ static void lp8501_run_engine(struct lp55xx_chip *chip, bool start)
lp55xx_run_engine_common(chip);
}
static int lp8501_led_brightness(struct lp55xx_led *led)
{
struct lp55xx_chip *chip = led->chip;
int ret;
mutex_lock(&chip->lock);
ret = lp55xx_write(chip, LP8501_REG_LED_PWM_BASE + led->chan_nr,
led->brightness);
mutex_unlock(&chip->lock);
return ret;
}
/* Chip specific configurations */
static struct lp55xx_device_config lp8501_cfg = {
.reg_op_mode = {
......@@ -173,10 +160,13 @@ static struct lp55xx_device_config lp8501_cfg = {
.prog_mem_base = {
.addr = LP8501_REG_PROG_MEM,
},
.reg_led_pwm_base = {
.addr = LP8501_REG_LED_PWM_BASE,
},
.pages_per_engine = LP8501_PAGES_PER_ENGINE,
.max_channel = LP8501_MAX_LEDS,
.post_init_device = lp8501_post_init_device,
.brightness_fn = lp8501_led_brightness,
.brightness_fn = lp55xx_led_brightness,
.set_led_current = lp8501_set_led_current,
.firmware_cb = lp55xx_firmware_loaded_cb,
.run_engine = lp8501_run_engine,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment