drivers/net: normalize TX_TIMEOUT

Some network drivers use old TX_TIMEOUT definitions, assuming HZ=100 of
old kernels.

Convert these definitions to include HZ, since HZ can be 1000 these
days.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/3c507.c

@@ -201,7 +201,7 @@ struct net_local {
 #define RX_BUF_SIZE 	(1518+14+18)	/* packet+header+RBD */
 #define RX_BUF_END		(dev->mem_end - dev->mem_start)
 
-#define TX_TIMEOUT 5
+#define TX_TIMEOUT (HZ/20)
 
 /*
   That's it: only 86 bytes to set up the beast, including every extra

drivers/net/3c515.c

@@ -98,7 +98,7 @@ static int rx_nocopy, rx_copy, queued_packet;
 #define WAIT_TX_AVAIL 200
 
 /* Operational parameter that usually are not changed. */
-#define TX_TIMEOUT  40		/* Time in jiffies before concluding Tx hung */
+#define TX_TIMEOUT  ((4*HZ)/10)	/* Time in jiffies before concluding Tx hung */
 
 /* The size here is somewhat misleading: the Corkscrew also uses the ISA
    aliased registers at <base>+0x400.

drivers/net/82596.c

@@ -191,7 +191,7 @@ enum commands {
 #define	 RX_SUSPEND	0x0030
 #define	 RX_ABORT	0x0040
 
-#define TX_TIMEOUT	5
+#define TX_TIMEOUT	(HZ/20)
 
 
 struct i596_reg {

drivers/net/arm/w90p910_ether.c

@@ -117,7 +117,7 @@
 #define TX_DESC_SIZE		10
 #define MAX_RBUFF_SZ		0x600
 #define MAX_TBUFF_SZ		0x600
-#define TX_TIMEOUT		50
+#define TX_TIMEOUT		(HZ/2)
 #define DELAY			1000
 #define CAM0			0x0
 

drivers/net/at1700.c

@@ -150,7 +150,7 @@ struct net_local {
 #define PORT_OFFSET(o) (o)
 
 
-#define TX_TIMEOUT		10
+#define TX_TIMEOUT		(HZ/10)
 
 
 /* Index to functions, as function prototypes. */

drivers/net/atarilance.c

@@ -116,7 +116,7 @@ MODULE_LICENSE("GPL");
 #define RX_RING_LEN_BITS		(RX_LOG_RING_SIZE << 5)
 #define	RX_RING_MOD_MASK		(RX_RING_SIZE - 1)
 
-#define TX_TIMEOUT	20
+#define TX_TIMEOUT	(HZ/5)
 
 /* The LANCE Rx and Tx ring descriptors. */
 struct lance_rx_head {

drivers/net/eepro.c

@@ -302,7 +302,7 @@ struct eepro_local {
 #define ee_id_eepro10p0 0x10   /* ID for eepro/10+ */
 #define ee_id_eepro10p1 0x31
 
-#define TX_TIMEOUT 40
+#define TX_TIMEOUT ((4*HZ)/10)
 
 /* Index to functions, as function prototypes. */
 

drivers/net/lance.c

@@ -207,7 +207,7 @@ tx_full and tbusy flags.
 #define LANCE_BUS_IF 0x16
 #define LANCE_TOTAL_SIZE 0x18
 
-#define TX_TIMEOUT	20
+#define TX_TIMEOUT	(HZ/5)
 
 /* The LANCE Rx and Tx ring descriptors. */
 struct lance_rx_head {

drivers/net/lib82596.c

@@ -161,7 +161,7 @@ enum commands {
 #define	 RX_SUSPEND	0x0030
 #define	 RX_ABORT	0x0040
 
-#define TX_TIMEOUT	5
+#define TX_TIMEOUT	(HZ/20)
 
 
 struct i596_reg {

drivers/net/znet.c

@@ -124,7 +124,7 @@ MODULE_LICENSE("GPL");
 #define TX_BUF_SIZE 8192
 #define DMA_BUF_SIZE (RX_BUF_SIZE + 16)	/* 8k + 16 bytes for trailers */
 
-#define TX_TIMEOUT	10
+#define TX_TIMEOUT	(HZ/10)
 
 struct znet_private {
 	int rx_dma, tx_dma;