Commit c654b6bf authored by Alexandre Belloni's avatar Alexandre Belloni Committed by Linus Walleij

pinctrl: at91: use own header

Copy the mach/at91_pio.h header locally and use it for pinctrl-at91.c. This
allows to remove the dependency on mach/at91_pio.h to be able to move at91 to
multiplatform.
Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent aa2c35e5
......@@ -7161,7 +7161,7 @@ PIN CONTROLLER - ATMEL AT91
M: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: drivers/pinctrl/pinctrl-at91.c
F: drivers/pinctrl/pinctrl-at91.*
PIN CONTROLLER - RENESAS
M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
......
......@@ -25,9 +25,7 @@
/* Since we request GPIOs from ourself */
#include <linux/pinctrl/consumer.h>
#include <mach/hardware.h>
#include <mach/at91_pio.h>
#include "pinctrl-at91.h"
#include "core.h"
#define MAX_GPIO_BANKS 5
......
/*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
*
* Parallel I/O Controller (PIO) - System peripherals registers.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __PINCTRL_AT91_H
#define __PINCTRL_AT91_H
#define PIO_PER 0x00 /* Enable Register */
#define PIO_PDR 0x04 /* Disable Register */
#define PIO_PSR 0x08 /* Status Register */
#define PIO_OER 0x10 /* Output Enable Register */
#define PIO_ODR 0x14 /* Output Disable Register */
#define PIO_OSR 0x18 /* Output Status Register */
#define PIO_IFER 0x20 /* Glitch Input Filter Enable */
#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */
#define PIO_IFSR 0x28 /* Glitch Input Filter Status */
#define PIO_SODR 0x30 /* Set Output Data Register */
#define PIO_CODR 0x34 /* Clear Output Data Register */
#define PIO_ODSR 0x38 /* Output Data Status Register */
#define PIO_PDSR 0x3c /* Pin Data Status Register */
#define PIO_IER 0x40 /* Interrupt Enable Register */
#define PIO_IDR 0x44 /* Interrupt Disable Register */
#define PIO_IMR 0x48 /* Interrupt Mask Register */
#define PIO_ISR 0x4c /* Interrupt Status Register */
#define PIO_MDER 0x50 /* Multi-driver Enable Register */
#define PIO_MDDR 0x54 /* Multi-driver Disable Register */
#define PIO_MDSR 0x58 /* Multi-driver Status Register */
#define PIO_PUDR 0x60 /* Pull-up Disable Register */
#define PIO_PUER 0x64 /* Pull-up Enable Register */
#define PIO_PUSR 0x68 /* Pull-up Status Register */
#define PIO_ASR 0x70 /* Peripheral A Select Register */
#define PIO_ABCDSR1 0x70 /* Peripheral ABCD Select Register 1 [some sam9 only] */
#define PIO_BSR 0x74 /* Peripheral B Select Register */
#define PIO_ABCDSR2 0x74 /* Peripheral ABCD Select Register 2 [some sam9 only] */
#define PIO_ABSR 0x78 /* AB Status Register */
#define PIO_IFSCDR 0x80 /* Input Filter Slow Clock Disable Register */
#define PIO_IFSCER 0x84 /* Input Filter Slow Clock Enable Register */
#define PIO_IFSCSR 0x88 /* Input Filter Slow Clock Status Register */
#define PIO_SCDR 0x8c /* Slow Clock Divider Debouncing Register */
#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */
#define PIO_PPDDR 0x90 /* Pad Pull-down Disable Register */
#define PIO_PPDER 0x94 /* Pad Pull-down Enable Register */
#define PIO_PPDSR 0x98 /* Pad Pull-down Status Register */
#define PIO_OWER 0xa0 /* Output Write Enable Register */
#define PIO_OWDR 0xa4 /* Output Write Disable Register */
#define PIO_OWSR 0xa8 /* Output Write Status Register */
#define PIO_AIMER 0xb0 /* Additional Interrupt Modes Enable Register */
#define PIO_AIMDR 0xb4 /* Additional Interrupt Modes Disable Register */
#define PIO_AIMMR 0xb8 /* Additional Interrupt Modes Mask Register */
#define PIO_ESR 0xc0 /* Edge Select Register */
#define PIO_LSR 0xc4 /* Level Select Register */
#define PIO_ELSR 0xc8 /* Edge/Level Status Register */
#define PIO_FELLSR 0xd0 /* Falling Edge/Low Level Select Register */
#define PIO_REHLSR 0xd4 /* Rising Edge/ High Level Select Register */
#define PIO_FRLHSR 0xd8 /* Fall/Rise - Low/High Status Register */
#define PIO_SCHMITT 0x100 /* Schmitt Trigger Register */
#define SAMA5D3_PIO_DRIVER1 0x118 /*PIO Driver 1 register offset*/
#define SAMA5D3_PIO_DRIVER2 0x11C /*PIO Driver 2 register offset*/
#define AT91SAM9X5_PIO_DRIVER1 0x114 /*PIO Driver 1 register offset*/
#define AT91SAM9X5_PIO_DRIVER2 0x118 /*PIO Driver 2 register offset*/
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment