qlcnic: Add driver logs in error path.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c

@@ -879,6 +879,9 @@ int qlcnic_83xx_alloc_mbx_args(struct qlcnic_cmd_args *mbx,
 			return 0;
 		}
 	}
+
+	dev_err(&adapter->pdev->dev, "%s: Invalid mailbox command opcode 0x%x\n",
+		__func__, type);
 	return -EINVAL;
 }
 

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c

@@ -2181,6 +2181,8 @@ int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter)
 		max_sds_rings = QLCNIC_MAX_SDS_RINGS;
 		max_tx_rings = QLCNIC_MAX_TX_RINGS;
 	} else {
+		dev_err(&adapter->pdev->dev, "%s: Invalid opmode %d\n",
+			__func__, ret);
 		return -EIO;
 	}
 

drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c

@@ -1027,8 +1027,11 @@ int qlcnic_config_port_mirroring(struct qlcnic_adapter *adapter, u8 id,
 	u32 arg1;
 
 	if (adapter->ahw->op_mode != QLCNIC_MGMT_FUNC ||
-	    !(adapter->eswitch[id].flags & QLCNIC_SWITCH_ENABLE))
+	    !(adapter->eswitch[id].flags & QLCNIC_SWITCH_ENABLE)) {
+		dev_err(&adapter->pdev->dev, "%s: Not a management function\n",
+			__func__);
 		return err;
+	}
 
 	arg1 = id | (enable_mirroring ? BIT_4 : 0);
 	arg1 |= pci_func << 8;
@@ -1318,8 +1321,12 @@ int qlcnic_config_switch_port(struct qlcnic_adapter *adapter,
 	u32 arg1, arg2 = 0;
 	u8 pci_func;
 
-	if (adapter->ahw->op_mode != QLCNIC_MGMT_FUNC)
+	if (adapter->ahw->op_mode != QLCNIC_MGMT_FUNC) {
+		dev_err(&adapter->pdev->dev, "%s: Not a management function\n",
+			__func__);
 		return err;
+	}
+
 	pci_func = esw_cfg->pci_func;
 	index = qlcnic_is_valid_nic_func(adapter, pci_func);
 	if (index < 0)
@@ -1363,6 +1370,8 @@ int qlcnic_config_switch_port(struct qlcnic_adapter *adapter,
 			arg1 &= ~(0x0ffff << 16);
 			break;
 	default:
+		dev_err(&adapter->pdev->dev, "%s: Invalid opmode 0x%x\n",
+			__func__, esw_cfg->op_mode);
 		return err;
 	}
 

drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c

@@ -1014,6 +1014,8 @@ int qlcnic_init_pci_info(struct qlcnic_adapter *adapter)
 
 		if (pfn >= ahw->max_vnic_func) {
 			ret = QL_STATUS_INVALID_PARAM;
+			dev_err(&adapter->pdev->dev, "%s: Invalid function 0x%x, max 0x%x\n",
+				__func__, pfn, ahw->max_vnic_func);
 			goto err_eswitch;
 		}
 
@@ -2531,8 +2533,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 				dev_err(&pdev->dev, "Adapter initialization failed. Please reboot\n");
 				goto err_out_free_hw;
 			default:
-				dev_err(&pdev->dev, "Adapter initialization failed. A reboot may be required to recover from this failure\n");
-				dev_err(&pdev->dev, "If reboot does not help to recover from this failure, try a flash update of the adapter\n");
+				dev_err(&pdev->dev, "Adapter initialization failed. Driver will load in maintenance mode to recover the adapter using the application\n");
 				goto err_out_maintenance_mode;
 			}
 		}

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c

@@ -362,6 +362,8 @@ int qlcnic_is_valid_nic_func(struct qlcnic_adapter *adapter, u8 pci_func)
 		if (adapter->npars[i].pci_func == pci_func)
 			return i;
 	}
+
+	dev_err(&adapter->pdev->dev, "%s: Invalid nic function\n", __func__);
 	return -EINVAL;
 }