Commit c6852c4c authored by Seokmann Ju's avatar Seokmann Ju Committed by James Bottomley

[SCSI] qla2xxx: Correct misc. endian and byte-ordering issues.

There were several places in the driver which could cause byte
ordering problem as provided by Al Viro
<viro@ZenIV.linux.org.uk>.
Signed-off-by: default avatarSeokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
parent 3b8117b8
......@@ -1036,22 +1036,6 @@ struct mid_db_entry_24xx {
uint8_t reserved_1;
};
/*
* Virtual Fabric ID type definition.
*/
typedef struct vf_id {
uint16_t id : 12;
uint16_t priority : 4;
} vf_id_t;
/*
* Virtual Fabric HopCt type definition.
*/
typedef struct vf_hopct {
uint16_t reserved : 8;
uint16_t hopct : 8;
} vf_hopct_t;
/*
* Virtual Port Control IOCB
*/
......@@ -1082,10 +1066,10 @@ struct vp_ctrl_entry_24xx {
uint8_t vp_idx_map[16];
uint16_t flags;
struct vf_id id;
uint16_t id;
uint16_t reserved_4;
struct vf_hopct hopct;
uint8_t reserved_5[8];
uint16_t hopct;
uint8_t reserved_5[24];
};
/*
......@@ -1132,9 +1116,9 @@ struct vp_config_entry_24xx {
uint16_t reserved_vp2;
uint8_t port_name_idx2[WWN_SIZE];
uint8_t node_name_idx2[WWN_SIZE];
struct vf_id id;
uint16_t id;
uint16_t reserved_4;
struct vf_hopct hopct;
uint16_t hopct;
uint8_t reserved_5;
};
......
......@@ -1583,8 +1583,8 @@ qla2x00_fdmi_rpa(scsi_qla_host_t *ha)
eiter->type = __constant_cpu_to_be16(FDMI_PORT_MAX_FRAME_SIZE);
eiter->len = __constant_cpu_to_be16(4 + 4);
max_frame_size = IS_FWI2_CAPABLE(ha) ?
(uint32_t) icb24->frame_payload_size:
(uint32_t) ha->init_cb->frame_payload_size;
le16_to_cpu(icb24->frame_payload_size):
le16_to_cpu(ha->init_cb->frame_payload_size);
eiter->a.max_frame_size = cpu_to_be32(max_frame_size);
size += 4 + 4;
......
......@@ -3645,7 +3645,7 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
if (le16_to_cpu(nv->login_timeout) < 4)
nv->login_timeout = __constant_cpu_to_le16(4);
ha->login_timeout = le16_to_cpu(nv->login_timeout);
icb->login_timeout = cpu_to_le16(nv->login_timeout);
icb->login_timeout = nv->login_timeout;
/* Set minimum RATOV to 100 tenths of a second. */
ha->r_a_tov = 100;
......
......@@ -1468,7 +1468,7 @@ qla24xx_login_fabric(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain,
lg->port_id[0] = al_pa;
lg->port_id[1] = area;
lg->port_id[2] = domain;
lg->vp_index = cpu_to_le16(ha->vp_idx);
lg->vp_index = ha->vp_idx;
rval = qla2x00_issue_iocb(ha, lg, lg_dma, 0);
if (rval != QLA_SUCCESS) {
DEBUG2_3_11(printk("%s(%ld): failed to issue Login IOCB "
......@@ -1723,7 +1723,7 @@ qla24xx_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain,
lg->port_id[0] = al_pa;
lg->port_id[1] = area;
lg->port_id[2] = domain;
lg->vp_index = cpu_to_le16(ha->vp_idx);
lg->vp_index = ha->vp_idx;
rval = qla2x00_issue_iocb(ha, lg, lg_dma, 0);
if (rval != QLA_SUCCESS) {
DEBUG2_3_11(printk("%s(%ld): failed to issue Logout IOCB "
......@@ -2642,12 +2642,11 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *ha,
struct vp_rpt_id_entry_24xx *rptid_entry)
{
uint8_t vp_idx;
uint16_t stat = le16_to_cpu(rptid_entry->vp_idx);
scsi_qla_host_t *vha;
if (rptid_entry->entry_status != 0)
return;
if (rptid_entry->entry_status != __constant_cpu_to_le16(CS_COMPLETE))
return;
if (rptid_entry->format == 0) {
DEBUG15(printk("%s:format 0 : scsi(%ld) number of VPs setup %d,"
......@@ -2657,17 +2656,17 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *ha,
rptid_entry->port_id[2], rptid_entry->port_id[1],
rptid_entry->port_id[0]));
} else if (rptid_entry->format == 1) {
vp_idx = LSB(rptid_entry->vp_idx);
vp_idx = LSB(stat);
DEBUG15(printk("%s:format 1: scsi(%ld): VP[%d] enabled "
"- status %d - "
"with port id %02x%02x%02x\n",__func__,ha->host_no,
vp_idx, MSB(rptid_entry->vp_idx),
vp_idx, MSB(stat),
rptid_entry->port_id[2], rptid_entry->port_id[1],
rptid_entry->port_id[0]));
if (vp_idx == 0)
return;
if (MSB(rptid_entry->vp_idx) == 1)
if (MSB(stat) == 1)
return;
list_for_each_entry(vha, &ha->vp_list, vp_list)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment