Merge tag 'iwlwifi-for-kalle-2016-02-15' of...

Merge tag 'iwlwifi-for-kalle-2016-02-15' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes

These are a few fixes for the current cycle.
3 out of the 5 patches fix a bugzilla.

* fix a race that users reported when we try to load the firmware
  and the hardware rfkill interrupt triggers at the same time.
* Luca fixes a very visible bug in scheduled scan: our firmware
  doesn't support scheduled scan with no profile configured and
  the supplicant sometimes requests such scheduled scans.
* build system fix
* firmware name update for 8265
* typo fix in return value

drivers/net/wireless/intel/iwlwifi/Kconfig

@@ -53,7 +53,6 @@ config IWLWIFI_LEDS
 
 config IWLDVM
 	tristate "Intel Wireless WiFi DVM Firmware support"
-	depends on m
 	help
 	  This is the driver that supports the DVM firmware. The list
 	  of the devices that use this firmware is available here:

drivers/net/wireless/intel/iwlwifi/iwl-8000.c

@@ -7,6 +7,7 @@
  *
  * Copyright(c) 2014 Intel Corporation. All rights reserved.
  * Copyright(c) 2014 - 2015 Intel Mobile Communications GmbH
+ * Copyright(c) 2016 Intel Deutschland GmbH
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -70,12 +71,15 @@
 
 /* Highest firmware API version supported */
 #define IWL8000_UCODE_API_MAX	20
+#define IWL8265_UCODE_API_MAX	20
 
 /* Oldest version we won't warn about */
 #define IWL8000_UCODE_API_OK	13
+#define IWL8265_UCODE_API_OK	20
 
 /* Lowest firmware API version supported */
 #define IWL8000_UCODE_API_MIN	13
+#define IWL8265_UCODE_API_MIN	20
 
 /* NVM versions */
 #define IWL8000_NVM_VERSION		0x0a1d
@@ -93,6 +97,10 @@
 #define IWL8000_MODULE_FIRMWARE(api) \
 	IWL8000_FW_PRE "-" __stringify(api) ".ucode"
 
+#define IWL8265_FW_PRE "iwlwifi-8265-"
+#define IWL8265_MODULE_FIRMWARE(api) \
+	IWL8265_FW_PRE __stringify(api) ".ucode"
+
 #define NVM_HW_SECTION_NUM_FAMILY_8000		10
 #define DEFAULT_NVM_FILE_FAMILY_8000B		"nvmData-8000B"
 #define DEFAULT_NVM_FILE_FAMILY_8000C		"nvmData-8000C"
@@ -144,10 +152,7 @@ static const struct iwl_tt_params iwl8000_tt_params = {
 	.support_tx_backoff = true,
 };
 
-#define IWL_DEVICE_8000							\
-	.ucode_api_max = IWL8000_UCODE_API_MAX,				\
-	.ucode_api_ok = IWL8000_UCODE_API_OK,				\
-	.ucode_api_min = IWL8000_UCODE_API_MIN,				\
+#define IWL_DEVICE_8000_COMMON						\
 	.device_family = IWL_DEVICE_FAMILY_8000,			\
 	.max_inst_size = IWL60_RTC_INST_SIZE,				\
 	.max_data_size = IWL60_RTC_DATA_SIZE,				\
@@ -167,10 +172,28 @@ static const struct iwl_tt_params iwl8000_tt_params = {
 	.thermal_params = &iwl8000_tt_params,				\
 	.apmg_not_supported = true
 
+#define IWL_DEVICE_8000							\
+	IWL_DEVICE_8000_COMMON,						\
+	.ucode_api_max = IWL8000_UCODE_API_MAX,				\
+	.ucode_api_ok = IWL8000_UCODE_API_OK,				\
+	.ucode_api_min = IWL8000_UCODE_API_MIN				\
+
+#define IWL_DEVICE_8260							\
+	IWL_DEVICE_8000_COMMON,						\
+	.ucode_api_max = IWL8000_UCODE_API_MAX,				\
+	.ucode_api_ok = IWL8000_UCODE_API_OK,				\
+	.ucode_api_min = IWL8000_UCODE_API_MIN				\
+
+#define IWL_DEVICE_8265							\
+	IWL_DEVICE_8000_COMMON,						\
+	.ucode_api_max = IWL8265_UCODE_API_MAX,				\
+	.ucode_api_ok = IWL8265_UCODE_API_OK,				\
+	.ucode_api_min = IWL8265_UCODE_API_MIN				\
+
 const struct iwl_cfg iwl8260_2n_cfg = {
 	.name = "Intel(R) Dual Band Wireless N 8260",
 	.fw_name_pre = IWL8000_FW_PRE,
-	IWL_DEVICE_8000,
+	IWL_DEVICE_8260,
 	.ht_params = &iwl8000_ht_params,
 	.nvm_ver = IWL8000_NVM_VERSION,
 	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
@@ -179,7 +202,7 @@ const struct iwl_cfg iwl8260_2n_cfg = {
 const struct iwl_cfg iwl8260_2ac_cfg = {
 	.name = "Intel(R) Dual Band Wireless AC 8260",
 	.fw_name_pre = IWL8000_FW_PRE,
-	IWL_DEVICE_8000,
+	IWL_DEVICE_8260,
 	.ht_params = &iwl8000_ht_params,
 	.nvm_ver = IWL8000_NVM_VERSION,
 	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
@@ -188,8 +211,8 @@ const struct iwl_cfg iwl8260_2ac_cfg = {
 
 const struct iwl_cfg iwl8265_2ac_cfg = {
 	.name = "Intel(R) Dual Band Wireless AC 8265",
-	.fw_name_pre = IWL8000_FW_PRE,
-	IWL_DEVICE_8000,
+	.fw_name_pre = IWL8265_FW_PRE,
+	IWL_DEVICE_8265,
 	.ht_params = &iwl8000_ht_params,
 	.nvm_ver = IWL8000_NVM_VERSION,
 	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
@@ -209,7 +232,7 @@ const struct iwl_cfg iwl4165_2ac_cfg = {
 const struct iwl_cfg iwl8260_2ac_sdio_cfg = {
 	.name = "Intel(R) Dual Band Wireless-AC 8260",
 	.fw_name_pre = IWL8000_FW_PRE,
-	IWL_DEVICE_8000,
+	IWL_DEVICE_8260,
 	.ht_params = &iwl8000_ht_params,
 	.nvm_ver = IWL8000_NVM_VERSION,
 	.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
@@ -236,3 +259,4 @@ const struct iwl_cfg iwl4165_2ac_sdio_cfg = {
 };
 
 MODULE_FIRMWARE(IWL8000_MODULE_FIRMWARE(IWL8000_UCODE_API_OK));
+MODULE_FIRMWARE(IWL8265_MODULE_FIRMWARE(IWL8265_UCODE_API_OK));

drivers/net/wireless/intel/iwlwifi/iwl-drv.c

@@ -243,8 +243,10 @@ static int iwl_request_firmware(struct iwl_drv *drv, bool first)
 	if (drv->trans->cfg->device_family == IWL_DEVICE_FAMILY_8000) {
 		char rev_step = 'A' + CSR_HW_REV_STEP(drv->trans->hw_rev);
 
-		snprintf(drv->firmware_name, sizeof(drv->firmware_name),
-			 "%s%c-%s.ucode", name_pre, rev_step, tag);
+		if (rev_step != 'A')
+			snprintf(drv->firmware_name,
+				 sizeof(drv->firmware_name), "%s%c-%s.ucode",
+				 name_pre, rev_step, tag);
 	}
 
 	IWL_DEBUG_INFO(drv, "attempting to load firmware %s'%s'\n",

drivers/net/wireless/intel/iwlwifi/mvm/scan.c

@@ -1298,6 +1298,10 @@ int iwl_mvm_sched_scan_start(struct iwl_mvm *mvm,
 		return -EBUSY;
 	}
 
+	/* we don't support "match all" in the firmware */
+	if (!req->n_match_sets)
+		return -EOPNOTSUPP;
+
 	ret = iwl_mvm_check_running_scans(mvm, type);
 	if (ret)
 		return ret;

drivers/net/wireless/intel/iwlwifi/pcie/internal.h

@@ -490,6 +490,15 @@ static inline void iwl_enable_interrupts(struct iwl_trans *trans)
 	iwl_write32(trans, CSR_INT_MASK, trans_pcie->inta_mask);
 }
 
+static inline void iwl_enable_fw_load_int(struct iwl_trans *trans)
+{
+	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
+
+	IWL_DEBUG_ISR(trans, "Enabling FW load interrupt\n");
+	trans_pcie->inta_mask = CSR_INT_BIT_FH_TX;
+	iwl_write32(trans, CSR_INT_MASK, trans_pcie->inta_mask);
+}
+
 static inline void iwl_enable_rfkill_int(struct iwl_trans *trans)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);

drivers/net/wireless/intel/iwlwifi/pcie/rx.c

@@ -1438,9 +1438,11 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id)
 			 inta & ~trans_pcie->inta_mask);
 	}
 
-	/* Re-enable all interrupts */
-	/* only Re-enable if disabled by irq */
-	if (test_bit(STATUS_INT_ENABLED, &trans->status))
+	/* we are loading the firmware, enable FH_TX interrupt only */
+	if (handled & CSR_INT_BIT_FH_TX)
+		iwl_enable_fw_load_int(trans);
+	/* only Re-enable all interrupt if disabled by irq */
+	else if (test_bit(STATUS_INT_ENABLED, &trans->status))
 		iwl_enable_interrupts(trans);
 	/* Re-enable RF_KILL if it occurred */
 	else if (handled & CSR_INT_BIT_RF_KILL)

drivers/net/wireless/intel/iwlwifi/pcie/trans.c

@@ -1021,82 +1021,6 @@ static int iwl_pcie_load_given_ucode_8000(struct iwl_trans *trans,
 					       &first_ucode_section);
 }
 
-static int iwl_trans_pcie_start_fw(struct iwl_trans *trans,
-				   const struct fw_img *fw, bool run_in_rfkill)
-{
-	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
-	bool hw_rfkill;
-	int ret;
-
-	mutex_lock(&trans_pcie->mutex);
-
-	/* Someone called stop_device, don't try to start_fw */
-	if (trans_pcie->is_down) {
-		IWL_WARN(trans,
-			 "Can't start_fw since the HW hasn't been started\n");
-		ret = EIO;
-		goto out;
-	}
-
-	/* This may fail if AMT took ownership of the device */
-	if (iwl_pcie_prepare_card_hw(trans)) {
-		IWL_WARN(trans, "Exit HW not ready\n");
-		ret = -EIO;
-		goto out;
-	}
-
-	iwl_enable_rfkill_int(trans);
-
-	/* If platform's RF_KILL switch is NOT set to KILL */
-	hw_rfkill = iwl_is_rfkill_set(trans);
-	if (hw_rfkill)
-		set_bit(STATUS_RFKILL, &trans->status);
-	else
-		clear_bit(STATUS_RFKILL, &trans->status);
-	iwl_trans_pcie_rf_kill(trans, hw_rfkill);
-	if (hw_rfkill && !run_in_rfkill) {
-		ret = -ERFKILL;
-		goto out;
-	}
-
-	iwl_write32(trans, CSR_INT, 0xFFFFFFFF);
-
-	ret = iwl_pcie_nic_init(trans);
-	if (ret) {
-		IWL_ERR(trans, "Unable to init nic\n");
-		goto out;
-	}
-
-	/* make sure rfkill handshake bits are cleared */
-	iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-	iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR,
-		    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
-	/* clear (again), then enable host interrupts */
-	iwl_write32(trans, CSR_INT, 0xFFFFFFFF);
-	iwl_enable_interrupts(trans);
-
-	/* really make sure rfkill handshake bits are cleared */
-	iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-	iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-
-	/* Load the given image to the HW */
-	if (trans->cfg->device_family == IWL_DEVICE_FAMILY_8000)
-		ret = iwl_pcie_load_given_ucode_8000(trans, fw);
-	else
-		ret = iwl_pcie_load_given_ucode(trans, fw);
-
-out:
-	mutex_unlock(&trans_pcie->mutex);
-	return ret;
-}
-
-static void iwl_trans_pcie_fw_alive(struct iwl_trans *trans, u32 scd_addr)
-{
-	iwl_pcie_reset_ict(trans);
-	iwl_pcie_tx_start(trans, scd_addr);
-}
-
 static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
@@ -1127,7 +1051,8 @@ static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power)
 	 * already dead.
 	 */
 	if (test_and_clear_bit(STATUS_DEVICE_ENABLED, &trans->status)) {
-		IWL_DEBUG_INFO(trans, "DEVICE_ENABLED bit was set and is now cleared\n");
+		IWL_DEBUG_INFO(trans,
+			       "DEVICE_ENABLED bit was set and is now cleared\n");
 		iwl_pcie_tx_stop(trans);
 		iwl_pcie_rx_stop(trans);
 
@@ -1161,7 +1086,6 @@ static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power)
 	iwl_disable_interrupts(trans);
 	spin_unlock(&trans_pcie->irq_lock);
 
-
 	/* clear all status bits */
 	clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status);
 	clear_bit(STATUS_INT_ENABLED, &trans->status);
@@ -1194,10 +1118,116 @@ static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power)
 	if (hw_rfkill != was_hw_rfkill)
 		iwl_trans_pcie_rf_kill(trans, hw_rfkill);
 
-	/* re-take ownership to prevent other users from stealing the deivce */
+	/* re-take ownership to prevent other users from stealing the device */
 	iwl_pcie_prepare_card_hw(trans);
 }
 
+static int iwl_trans_pcie_start_fw(struct iwl_trans *trans,
+				   const struct fw_img *fw, bool run_in_rfkill)
+{
+	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
+	bool hw_rfkill;
+	int ret;
+
+	/* This may fail if AMT took ownership of the device */
+	if (iwl_pcie_prepare_card_hw(trans)) {
+		IWL_WARN(trans, "Exit HW not ready\n");
+		ret = -EIO;
+		goto out;
+	}
+
+	iwl_enable_rfkill_int(trans);
+
+	iwl_write32(trans, CSR_INT, 0xFFFFFFFF);
+
+	/*
+	 * We enabled the RF-Kill interrupt and the handler may very
+	 * well be running. Disable the interrupts to make sure no other
+	 * interrupt can be fired.
+	 */
+	iwl_disable_interrupts(trans);
+
+	/* Make sure it finished running */
+	synchronize_irq(trans_pcie->pci_dev->irq);
+
+	mutex_lock(&trans_pcie->mutex);
+
+	/* If platform's RF_KILL switch is NOT set to KILL */
+	hw_rfkill = iwl_is_rfkill_set(trans);
+	if (hw_rfkill)
+		set_bit(STATUS_RFKILL, &trans->status);
+	else
+		clear_bit(STATUS_RFKILL, &trans->status);
+	iwl_trans_pcie_rf_kill(trans, hw_rfkill);
+	if (hw_rfkill && !run_in_rfkill) {
+		ret = -ERFKILL;
+		goto out;
+	}
+
+	/* Someone called stop_device, don't try to start_fw */
+	if (trans_pcie->is_down) {
+		IWL_WARN(trans,
+			 "Can't start_fw since the HW hasn't been started\n");
+		ret = -EIO;
+		goto out;
+	}
+
+	/* make sure rfkill handshake bits are cleared */
+	iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+	iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR,
+		    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+
+	/* clear (again), then enable host interrupts */
+	iwl_write32(trans, CSR_INT, 0xFFFFFFFF);
+
+	ret = iwl_pcie_nic_init(trans);
+	if (ret) {
+		IWL_ERR(trans, "Unable to init nic\n");
+		goto out;
+	}
+
+	/*
+	 * Now, we load the firmware and don't want to be interrupted, even
+	 * by the RF-Kill interrupt (hence mask all the interrupt besides the
+	 * FH_TX interrupt which is needed to load the firmware). If the
+	 * RF-Kill switch is toggled, we will find out after having loaded
+	 * the firmware and return the proper value to the caller.
+	 */
+	iwl_enable_fw_load_int(trans);
+
+	/* really make sure rfkill handshake bits are cleared */
+	iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+	iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+
+	/* Load the given image to the HW */
+	if (trans->cfg->device_family == IWL_DEVICE_FAMILY_8000)
+		ret = iwl_pcie_load_given_ucode_8000(trans, fw);
+	else
+		ret = iwl_pcie_load_given_ucode(trans, fw);
+	iwl_enable_interrupts(trans);
+
+	/* re-check RF-Kill state since we may have missed the interrupt */
+	hw_rfkill = iwl_is_rfkill_set(trans);
+	if (hw_rfkill)
+		set_bit(STATUS_RFKILL, &trans->status);
+	else
+		clear_bit(STATUS_RFKILL, &trans->status);
+
+	iwl_trans_pcie_rf_kill(trans, hw_rfkill);
+	if (hw_rfkill && !run_in_rfkill)
+		ret = -ERFKILL;
+
+out:
+	mutex_unlock(&trans_pcie->mutex);
+	return ret;
+}
+
+static void iwl_trans_pcie_fw_alive(struct iwl_trans *trans, u32 scd_addr)
+{
+	iwl_pcie_reset_ict(trans);
+	iwl_pcie_tx_start(trans, scd_addr);
+}
+
 static void iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);