Commit c6ad7b7d authored by Maciej W. Rozycki's avatar Maciej W. Rozycki Committed by Ralf Baechle

Use macros for the RM7k cp0.config bits instead of magic numbers.

Minor clean-ups.
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 8a185d14
......@@ -103,7 +103,7 @@ static __init void __rm7k_sc_enable(void)
{
int i;
set_c0_config(R7K_CONF_SE);
set_c0_config(RM7K_CONF_SE);
write_c0_taglo(0);
write_c0_taghi(0);
......@@ -122,16 +122,16 @@ static __init void __rm7k_sc_enable(void)
static __init void rm7k_sc_enable(void)
{
if (read_c0_config() & R7K_CONF_SE)
if (read_c0_config() & RM7K_CONF_SE)
return;
printk(KERN_INFO "Enabling secondary cache...");
printk(KERN_INFO "Enabling secondary cache...\n");
run_uncached(__rm7k_sc_enable);
}
static void rm7k_sc_disable(void)
{
clear_c0_config(R7K_CONF_SE);
clear_c0_config(RM7K_CONF_SE);
}
struct bcache_ops rm7k_sc_ops = {
......@@ -145,19 +145,19 @@ void __init rm7k_sc_init(void)
{
unsigned int config = read_c0_config();
if ((config >> 31) & 1) /* Bit 31 set -> no S-Cache */
if ((config & RM7K_CONF_SC))
return;
printk(KERN_INFO "Secondary cache size %dK, linesize %d bytes.\n",
(scache_size >> 10), sc_lsize);
if (!(config & R7K_CONF_SE))
if (!(config & RM7K_CONF_SE))
rm7k_sc_enable();
/*
* While we're at it let's deal with the tertiary cache.
*/
if (!((config >> 17) & 1)) {
if (!(config & RM7K_CONF_TC)) {
/*
* We can't enable the L3 cache yet. There may be board-specific
......@@ -170,9 +170,9 @@ void __init rm7k_sc_init(void)
* to probe it.
*/
printk(KERN_INFO "Tertiary cache present, %s enabled\n",
config&(1<<12) ? "already" : "not (yet)");
(config & RM7K_CONF_TE) ? "already" : "not (yet)");
if ((config >> 12) & 1)
if ((config & RM7K_CONF_TE))
rm7k_tcache_enabled = 1;
}
......
......@@ -425,6 +425,7 @@
#define CONF_SM (_ULCAST_(1) << 16)
#define CONF_SC (_ULCAST_(1) << 17)
#define CONF_EW (_ULCAST_(3) << 18)
#define CONF_SB (_ULCAST_(3) << 22)
#define CONF_EP (_ULCAST_(15)<< 24)
#define CONF_EC (_ULCAST_(7) << 28)
#define CONF_CM (_ULCAST_(1) << 31)
......@@ -432,14 +433,18 @@
/* Bits specific to the R4xx0. */
#define R4K_CONF_SW (_ULCAST_(1) << 20)
#define R4K_CONF_SS (_ULCAST_(1) << 21)
#define R4K_CONF_SB (_ULCAST_(3) << 22)
/* Bits specific to the R5000. */
#define R5K_CONF_SE (_ULCAST_(1) << 12)
#define R5K_CONF_SS (_ULCAST_(3) << 20)
/* Bits specific to the RM7000. */
#define R7K_CONF_SE (_ULCAST_(1) << 3)
#define RM7K_CONF_SE (_ULCAST_(1) << 3)
#define RM7K_CONF_TE (_ULCAST_(1) << 12)
#define RM7K_CONF_CLK (_ULCAST_(1) << 16)
#define RM7K_CONF_TC (_ULCAST_(1) << 17)
#define RM7K_CONF_SI (_ULCAST_(3) << 20)
#define RM7K_CONF_SC (_ULCAST_(1) << 31)
/* Bits specific to the R10000. */
#define R10K_CONF_DN (_ULCAST_(3) << 3)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment