Commit c6c6bc6e authored by Richard Zhu's avatar Richard Zhu Committed by Jassi Brar

mailbox: imx: add support for imx v1 mu

There is a version 1.0 MU on i.MX7ULP platform.
One new version ID register is added, and it's offset is 0.
TRn registers are defined at the offset 0x20 ~ 0x2C.
RRn registers are defined at the offset 0x40 ~ 0x4C.
SR/CR registers are defined at 0x60/0x64.
Extend this driver to support it.
Signed-off-by: default avatarRichard Zhu <hongxing.zhu@nxp.com>
Suggested-by: default avatarOleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: default avatarDong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: default avatarOleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: default avatarDaniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: default avatarJassi Brar <jaswinder.singh@linaro.org>
parent 58340e7d
......@@ -12,19 +12,11 @@
#include <linux/of_device.h>
#include <linux/slab.h>
/* Transmit Register */
#define IMX_MU_xTRn(x) (0x00 + 4 * (x))
/* Receive Register */
#define IMX_MU_xRRn(x) (0x10 + 4 * (x))
/* Status Register */
#define IMX_MU_xSR 0x20
#define IMX_MU_xSR_GIPn(x) BIT(28 + (3 - (x)))
#define IMX_MU_xSR_RFn(x) BIT(24 + (3 - (x)))
#define IMX_MU_xSR_TEn(x) BIT(20 + (3 - (x)))
#define IMX_MU_xSR_BRDIP BIT(9)
/* Control Register */
#define IMX_MU_xCR 0x24
/* General Purpose Interrupt Enable */
#define IMX_MU_xCR_GIEn(x) BIT(28 + (3 - (x)))
/* Receive Interrupt Enable */
......@@ -44,6 +36,13 @@ enum imx_mu_chan_type {
IMX_MU_TYPE_RXDB, /* Rx doorbell */
};
struct imx_mu_dcfg {
u32 xTR[4]; /* Transmit Registers */
u32 xRR[4]; /* Receive Registers */
u32 xSR; /* Status Register */
u32 xCR; /* Control Register */
};
struct imx_mu_con_priv {
unsigned int idx;
char irq_desc[IMX_MU_CHAN_NAME_SIZE];
......@@ -61,12 +60,27 @@ struct imx_mu_priv {
struct mbox_chan mbox_chans[IMX_MU_CHANS];
struct imx_mu_con_priv con_priv[IMX_MU_CHANS];
const struct imx_mu_dcfg *dcfg;
struct clk *clk;
int irq;
bool side_b;
};
static const struct imx_mu_dcfg imx_mu_cfg_imx6sx = {
.xTR = {0x0, 0x4, 0x8, 0xc},
.xRR = {0x10, 0x14, 0x18, 0x1c},
.xSR = 0x20,
.xCR = 0x24,
};
static const struct imx_mu_dcfg imx_mu_cfg_imx7ulp = {
.xTR = {0x20, 0x24, 0x28, 0x2c},
.xRR = {0x40, 0x44, 0x48, 0x4c},
.xSR = 0x60,
.xCR = 0x64,
};
static struct imx_mu_priv *to_imx_mu_priv(struct mbox_controller *mbox)
{
return container_of(mbox, struct imx_mu_priv, mbox);
......@@ -88,10 +102,10 @@ static u32 imx_mu_xcr_rmw(struct imx_mu_priv *priv, u32 set, u32 clr)
u32 val;
spin_lock_irqsave(&priv->xcr_lock, flags);
val = imx_mu_read(priv, IMX_MU_xCR);
val = imx_mu_read(priv, priv->dcfg->xCR);
val &= ~clr;
val |= set;
imx_mu_write(priv, val, IMX_MU_xCR);
imx_mu_write(priv, val, priv->dcfg->xCR);
spin_unlock_irqrestore(&priv->xcr_lock, flags);
return val;
......@@ -111,8 +125,8 @@ static irqreturn_t imx_mu_isr(int irq, void *p)
struct imx_mu_con_priv *cp = chan->con_priv;
u32 val, ctrl, dat;
ctrl = imx_mu_read(priv, IMX_MU_xCR);
val = imx_mu_read(priv, IMX_MU_xSR);
ctrl = imx_mu_read(priv, priv->dcfg->xCR);
val = imx_mu_read(priv, priv->dcfg->xSR);
switch (cp->type) {
case IMX_MU_TYPE_TX:
......@@ -138,10 +152,10 @@ static irqreturn_t imx_mu_isr(int irq, void *p)
imx_mu_xcr_rmw(priv, 0, IMX_MU_xCR_TIEn(cp->idx));
mbox_chan_txdone(chan, 0);
} else if (val == IMX_MU_xSR_RFn(cp->idx)) {
dat = imx_mu_read(priv, IMX_MU_xRRn(cp->idx));
dat = imx_mu_read(priv, priv->dcfg->xRR[cp->idx]);
mbox_chan_received_data(chan, (void *)&dat);
} else if (val == IMX_MU_xSR_GIPn(cp->idx)) {
imx_mu_write(priv, IMX_MU_xSR_GIPn(cp->idx), IMX_MU_xSR);
imx_mu_write(priv, IMX_MU_xSR_GIPn(cp->idx), priv->dcfg->xSR);
mbox_chan_received_data(chan, NULL);
} else {
dev_warn_ratelimited(priv->dev, "Not handled interrupt\n");
......@@ -159,7 +173,7 @@ static int imx_mu_send_data(struct mbox_chan *chan, void *data)
switch (cp->type) {
case IMX_MU_TYPE_TX:
imx_mu_write(priv, *arg, IMX_MU_xTRn(cp->idx));
imx_mu_write(priv, *arg, priv->dcfg->xTR[cp->idx]);
imx_mu_xcr_rmw(priv, IMX_MU_xCR_TIEn(cp->idx), 0);
break;
case IMX_MU_TYPE_TXDB:
......@@ -270,7 +284,7 @@ static void imx_mu_init_generic(struct imx_mu_priv *priv)
return;
/* Set default MU configuration */
imx_mu_write(priv, 0, IMX_MU_xCR);
imx_mu_write(priv, 0, priv->dcfg->xCR);
}
static int imx_mu_probe(struct platform_device *pdev)
......@@ -278,6 +292,7 @@ static int imx_mu_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct imx_mu_priv *priv;
const struct imx_mu_dcfg *dcfg;
unsigned int i;
int ret;
......@@ -295,6 +310,11 @@ static int imx_mu_probe(struct platform_device *pdev)
if (priv->irq < 0)
return priv->irq;
dcfg = of_device_get_match_data(dev);
if (!dcfg)
return -EINVAL;
priv->dcfg = dcfg;
priv->clk = devm_clk_get(dev, NULL);
if (IS_ERR(priv->clk)) {
if (PTR_ERR(priv->clk) != -ENOENT)
......@@ -348,7 +368,8 @@ static int imx_mu_remove(struct platform_device *pdev)
}
static const struct of_device_id imx_mu_dt_ids[] = {
{ .compatible = "fsl,imx6sx-mu" },
{ .compatible = "fsl,imx7ulp-mu", .data = &imx_mu_cfg_imx7ulp },
{ .compatible = "fsl,imx6sx-mu", .data = &imx_mu_cfg_imx6sx },
{ },
};
MODULE_DEVICE_TABLE(of, imx_mu_dt_ids);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment