Merge tag 'sound-3.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A bunch of small fixes for USB-audio and HD-audio, where most of them
  are for regressions: USB-audio PM fixes, ratelimit annoyance fix, HDMI
  offline state fix, and a couple of device-specific quirks"

* tag 'sound-3.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - hdmi: Set converter channel count even without sink
  ALSA: usb-audio: work around corrupted TEAC UD-H01 feedback data
  ALSA: usb-audio: Fix deadlocks at resuming
  ALSA: usb-audio: Save mixer status only once at suspend
  ALSA: usb-audio: Prevent printk ratelimiting from spamming kernel log while DEBUG not defined
  ALSA: hda - add headset mic detect quirk for a Dell laptop

sound/pci/hda/patch_hdmi.c

@@ -1127,8 +1127,10 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec,
 					    AMP_OUT_UNMUTE);
 
 	eld = &per_pin->sink_eld;
-	if (!eld->monitor_present)
+	if (!eld->monitor_present) {
+		hdmi_set_channel_count(codec, per_pin->cvt_nid, channels);
 		return;
+	}
 
 	if (!non_pcm && per_pin->chmap_set)
 		ca = hdmi_manual_channel_allocation(channels, per_pin->chmap);

sound/pci/hda/patch_realtek.c

@@ -4622,6 +4622,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1028, 0x0668, "Dell", ALC255_FIXUP_DELL2_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x0669, "Dell", ALC255_FIXUP_DELL2_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x0674, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1028, 0x067e, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x067f, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x15cc, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x15cd, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),

sound/usb/card.c

@@ -651,7 +651,7 @@ int snd_usb_autoresume(struct snd_usb_audio *chip)
 	int err = -ENODEV;
 
 	down_read(&chip->shutdown_rwsem);
-	if (chip->probing)
+	if (chip->probing && chip->in_pm)
 		err = 0;
 	else if (!chip->shutdown)
 		err = usb_autopm_get_interface(chip->pm_intf);
@@ -663,7 +663,7 @@ int snd_usb_autoresume(struct snd_usb_audio *chip)
 void snd_usb_autosuspend(struct snd_usb_audio *chip)
 {
 	down_read(&chip->shutdown_rwsem);
-	if (!chip->shutdown && !chip->probing)
+	if (!chip->shutdown && !chip->probing && !chip->in_pm)
 		usb_autopm_put_interface(chip->pm_intf);
 	up_read(&chip->shutdown_rwsem);
 }
@@ -695,8 +695,9 @@ static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message)
 			chip->autosuspended = 1;
 	}
 
-	list_for_each_entry(mixer, &chip->mixer_list, list)
-		snd_usb_mixer_suspend(mixer);
+	if (chip->num_suspended_intf == 1)
+		list_for_each_entry(mixer, &chip->mixer_list, list)
+			snd_usb_mixer_suspend(mixer);
 
 	return 0;
 }
@@ -711,6 +712,8 @@ static int __usb_audio_resume(struct usb_interface *intf, bool reset_resume)
 		return 0;
 	if (--chip->num_suspended_intf)
 		return 0;
+
+	chip->in_pm = 1;
 	/*
 	 * ALSA leaves material resumption to user space
 	 * we just notify and restart the mixers
@@ -726,6 +729,7 @@ static int __usb_audio_resume(struct usb_interface *intf, bool reset_resume)
 	chip->autosuspended = 0;
 
 err_out:
+	chip->in_pm = 0;
 	return err;
 }
 

sound/usb/card.h

@@ -92,6 +92,7 @@ struct snd_usb_endpoint {
 	unsigned int curframesize;      /* current packet size in frames (for capture) */
 	unsigned int syncmaxsize;	/* sync endpoint packet size */
 	unsigned int fill_max:1;	/* fill max packet size always */
+	unsigned int udh01_fb_quirk:1;	/* corrupted feedback data */
 	unsigned int datainterval;      /* log_2 of data packet interval */
 	unsigned int syncinterval;	/* P for adaptive mode, 0 otherwise */
 	unsigned char silence_value;

sound/usb/endpoint.c

@@ -471,6 +471,10 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
 			ep->syncinterval = 3;
 
 		ep->syncmaxsize = le16_to_cpu(get_endpoint(alts, 1)->wMaxPacketSize);
+
+		if (chip->usb_id == USB_ID(0x0644, 0x8038) /* TEAC UD-H01 */ &&
+		    ep->syncmaxsize == 4)
+			ep->udh01_fb_quirk = 1;
 	}
 
 	list_add_tail(&ep->list, &chip->ep_list);
@@ -1105,7 +1109,16 @@ void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep,
 	if (f == 0)
 		return;
 
-	if (unlikely(ep->freqshift == INT_MIN)) {
+	if (unlikely(sender->udh01_fb_quirk)) {
+		/*
+		 * The TEAC UD-H01 firmware sometimes changes the feedback value
+		 * by +/- 0x1.0000.
+		 */
+		if (f < ep->freqn - 0x8000)
+			f += 0x10000;
+		else if (f > ep->freqn + 0x8000)
+			f -= 0x10000;
+	} else if (unlikely(ep->freqshift == INT_MIN)) {
 		/*
 		 * The first time we see a feedback value, determine its format
 		 * by shifting it left or right until it matches the nominal

sound/usb/pcm.c

@@ -1501,9 +1501,8 @@ static void retire_playback_urb(struct snd_usb_substream *subs,
 	 * The error should be lower than 2ms since the estimate relies
 	 * on two reads of a counter updated every ms.
 	 */
-	if (printk_ratelimit() &&
-	    abs(est_delay - subs->last_delay) * 1000 > runtime->rate * 2)
-		dev_dbg(&subs->dev->dev,
+	if (abs(est_delay - subs->last_delay) * 1000 > runtime->rate * 2)
+		dev_dbg_ratelimited(&subs->dev->dev,
 			"delay: estimated %d, actual %d\n",
 			est_delay, subs->last_delay);
 

sound/usb/usbaudio.h

@@ -40,6 +40,7 @@ struct snd_usb_audio {
 	struct rw_semaphore shutdown_rwsem;
 	unsigned int shutdown:1;
 	unsigned int probing:1;
+	unsigned int in_pm:1;
 	unsigned int autosuspended:1;	
 	unsigned int txfr_quirk:1; /* Subframe boundaries on transfers */