Merge tag 'iio-for-4.21b' of...

Merge tag 'iio-for-4.21b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO new device support, features and cleanups for the 4.21 cycle.

Staging graduation
* ad2s90
  - Driver for this resolver to digital chip.

New drivers and device support.
* ad5686
  - Add support for ad5310r DAC and associated fix in value read back.
* exynos-adc
  - Support for S5PV210 which is slightly different from other parts.
* mcp41010
  - Driver supporting MCP41010, MCP41050, MCP41100, MCP42010, MCP42050 and
  MCP42100 microchip potentiometers.

New ACPI ids.
* ak8975
  - AKM9911 ACPI HID.
* kxcjk-1013
  - KXJ2109 ACPI HID.
  - KIOX010A ACPI HID.

New features
* ad5933
  - Explicit DT binding.
* ad2s90
  - Explicit DT binding including dropping spi setup that is done via dt
    in favour of verifying the settings form DT.
* adt7316
  - Explicit DT binding and support for gpio, irq_flags etc.
* stm32-adc
  - Runtime power management.

Minor fixes and cleanups
* core
  - Protect against missing info structure.
* ad2s90
  - SPDX
  - Add documentation fo the mutex.
* ad7280a
  - Check allocation failure.
  - Fix an accidental replacement of an error return.
* adt7316
  - Switch some variables to be local and rename for consistency with other
    drivers.
  - Revert a false handling of 0 as an error introduced earlier this cycle.
* bmi160
  - Use devm functions throughout probe() to avoid need for remove().
* hid-sensor-hub
  - White space cleanup.
* hts221
  - MAINTAINERS entry.
* lis302
  - Use generic name in the DT binding doc.
* Messon-saradc
  - Check for allocation error.
  - Fix some presented clock names that break clk debugfs.
* qcom-spmi-adc
  - A fix for initialization of the prescale property. Came late in the
    cycle, so merge window is probably the best route for this.
* st_lsm6dsx
  - Allow for variable read length to support wider range of slave devices.

* tag 'iio-for-4.21b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (37 commits)
  iio: adc: qcom-spmi-adc5: Initialize prescale properly
  dt-bindings: iio: adc: exynos-adc: Add S5PV210 variant
  iio: adc: Allow selection of Exynos ADC on S5PV210
  iio: adc: exynos-adc: Add S5PV210 variant
  iio: bmi160: use all devm functions in probe
  iio: dac: ad5686: fix bit shift read register
  iio:dac:ad5686: Add AD5310R support
  Revert "Staging: iio: adt7316: Add an extra check for 'ret' equals to 0"
  dt-bindings: iio: accel: use a generic node name for lis302
  iio: core: check 'info' value before registering the device
  staging: iio: adc: ad7280a: fix overwrite of the returned value
  staging: iio: adc: ad7280a: check for devm_kasprint() failure
  iio: humidity: hts221: add entry in MAINTAINERS file
  iio: magnetometer: ak8975: Add the "AKM9911" ACPI HID
  staging:iio:ad2s90: Move out of staging
  staging:iio:ad2s90: Add comment to device state mutex
  staging:iio:ad2s90: Replace license text w/ SPDX identifier
  dt-bindings:iio:resolver: Add docs for ad2s90
  staging:iio:ad2s90: Add max frequency check at probe
  staging:iio:ad2s90: Remove spi setup that should be done via dt
  ...

Documentation/devicetree/bindings/iio/accel/lis302.txt

@@ -64,7 +64,7 @@ Optional properties for all bus drivers:
 
 Example for a SPI device node:
 
-	lis302@0 {
+	accelerometer@0 {
 		compatible = "st,lis302dl-spi";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
@@ -89,7 +89,7 @@ Example for a SPI device node:
 
 Example for a I2C device node:
 
-	lis331dlh: lis331dlh@18 {
+	lis331dlh: accelerometer@18 {
 		compatible = "st,lis331dlh", "st,lis3lv02d";
 		reg = <0x18>;
 		Vdd-supply = <&lis3_reg>;

Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt

@@ -11,7 +11,7 @@ New driver handles the following
 
 Required properties:
 - compatible:		Must be "samsung,exynos-adc-v1"
-				for exynos4412/5250 and s5pv210 controllers.
+				for exynos4412/5250 controllers.
 			Must be "samsung,exynos-adc-v2" for
 				future controllers.
 			Must be "samsung,exynos3250-adc" for
@@ -28,6 +28,8 @@ Required properties:
 				the ADC in s3c2443 and compatibles
 			Must be "samsung,s3c6410-adc" for
 				the ADC in s3c6410 and compatibles
+			Must be "samsung,s5pv210-adc" for
+				the ADC in s5pv210 and compatibles
 - reg:			List of ADC register address range
 			- The base address and range of ADC register
 			- The base address and range of ADC_PHY register (every

Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt

+* Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
+
+Datasheet publicly available at:
+http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in
+
+        Documentation/devicetree/bindings/spi/spi-bus.txt
+
+must be specified.
+
+Required properties:
+	- compatible:  	Must be one of the following, depending on the
+			model:
+			"microchip,mcp41010"
+			"microchip,mcp41050"
+			"microchip,mcp41100"
+			"microchip,mcp42010"
+			"microchip,mcp42050"
+			"microchip,mcp42100"
+
+Example:
+potentiometer@0 {
+	compatible = "microchip,mcp41010";
+	reg = <0>;
+	spi-max-frequency = <500000>;
+};

Documentation/devicetree/bindings/iio/resolver/ad2s90.txt

+Analog Devices AD2S90 Resolver-to-Digital Converter
+
+https://www.analog.com/en/products/ad2s90.html
+
+Required properties:
+  - compatible: should be "adi,ad2s90"
+  - reg: SPI chip select number for the device
+  - spi-max-frequency: set maximum clock frequency, must be 830000
+  - spi-cpol and spi-cpha:
+        Either SPI mode (0,0) or (1,1) must be used, so specify none or both of
+        spi-cpha, spi-cpol.
+
+See for more details:
+    Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Note about max frequency:
+    Chip's max frequency, as specified in its datasheet, is 2Mhz. But a 600ns
+    delay is expected between the application of a logic LO to CS and the
+    application of SCLK, as also specified. And since the delay is not
+    implemented in the spi code, to satisfy it, SCLK's period should be at most
+    2 * 600ns, so the max frequency should be 1 / (2 * 6e-7), which gives
+    roughly 830000Hz.
+
+Example:
+resolver@0 {
+	compatible = "adi,ad2s90";
+	reg = <0>;
+	spi-max-frequency = <830000>;
+	spi-cpol;
+	spi-cpha;
+};

MAINTAINERS

@@ -6866,6 +6866,14 @@ L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/input/touchscreen/htcpen.c
 
+HTS221 TEMPERATURE-HUMIDITY IIO DRIVER
+M:	Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+L:	linux-iio@vger.kernel.org
+W:	http://www.st.com/
+S:	Maintained
+F:	drivers/iio/humidity/hts221*
+F:	Documentation/devicetree/bindings/iio/humidity/hts221.txt
+
 HUAWEI ETHERNET DRIVER
 M:	Aviad Krawczyk <aviad.krawczyk@huawei.com>
 L:	netdev@vger.kernel.org

drivers/iio/accel/kxcjk-1013.c

@@ -1491,7 +1491,9 @@ static const struct acpi_device_id kx_acpi_match[] = {
 	{"KXCJ9000", KXCJ91008},
 	{"KIOX0009", KXTJ21009},
 	{"KIOX000A", KXCJ91008},
+	{"KIOX010A", KXCJ91008}, /* KXCJ91008 inside the display of a 2-in-1 */
 	{"KXTJ1009", KXTJ21009},
+	{"KXJ2109",  KXTJ21009},
 	{"SMO8500",  KXCJ91008},
 	{ },
 };

drivers/iio/adc/Kconfig

@@ -295,7 +295,7 @@ config EP93XX_ADC
 
 config EXYNOS_ADC
 	tristate "Exynos ADC driver support"
-	depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST)
+	depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || (OF && COMPILE_TEST)
 	depends on HAS_IOMEM
 	help
 	  Core support for the ADC block found in the Samsung EXYNOS series

drivers/iio/adc/exynos_adc.c

@@ -115,6 +115,7 @@
 #define MAX_ADC_V2_CHANNELS		10
 #define MAX_ADC_V1_CHANNELS		8
 #define MAX_EXYNOS3250_ADC_CHANNELS	2
+#define MAX_S5PV210_ADC_CHANNELS	10
 
 /* Bit definitions common for ADC_V1 and ADC_V2 */
 #define ADC_CON_EN_START	(1u << 0)
@@ -282,6 +283,16 @@ static const struct exynos_adc_data exynos_adc_v1_data = {
 	.start_conv	= exynos_adc_v1_start_conv,
 };
 
+static const struct exynos_adc_data exynos_adc_s5pv210_data = {
+	.num_channels	= MAX_S5PV210_ADC_CHANNELS,
+	.mask		= ADC_DATX_MASK,	/* 12 bit ADC resolution */
+
+	.init_hw	= exynos_adc_v1_init_hw,
+	.exit_hw	= exynos_adc_v1_exit_hw,
+	.clear_irq	= exynos_adc_v1_clear_irq,
+	.start_conv	= exynos_adc_v1_start_conv,
+};
+
 static void exynos_adc_s3c2416_start_conv(struct exynos_adc *info,
 					  unsigned long addr)
 {
@@ -478,6 +489,9 @@ static const struct of_device_id exynos_adc_match[] = {
 	}, {
 		.compatible = "samsung,s3c6410-adc",
 		.data = &exynos_adc_s3c64xx_data,
+	}, {
+		.compatible = "samsung,s5pv210-adc",
+		.data = &exynos_adc_s5pv210_data,
 	}, {
 		.compatible = "samsung,exynos-adc-v1",
 		.data = &exynos_adc_v1_data,

drivers/iio/adc/meson_saradc.c

@@ -656,8 +656,11 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
 	struct clk_init_data init;
 	const char *clk_parents[1];
 
-	init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%pOF#adc_div",
-				   indio_dev->dev.of_node);
+	init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%s#adc_div",
+				   dev_name(indio_dev->dev.parent));
+	if (!init.name)
+		return -ENOMEM;
+
 	init.flags = 0;
 	init.ops = &clk_divider_ops;
 	clk_parents[0] = __clk_get_name(priv->clkin);
@@ -675,8 +678,11 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
 	if (WARN_ON(IS_ERR(priv->adc_div_clk)))
 		return PTR_ERR(priv->adc_div_clk);
 
-	init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%pOF#adc_en",
-				   indio_dev->dev.of_node);
+	init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%s#adc_en",
+				   dev_name(indio_dev->dev.parent));
+	if (!init.name)
+		return -ENOMEM;
+
 	init.flags = CLK_SET_RATE_PARENT;
 	init.ops = &clk_gate_ops;
 	clk_parents[0] = __clk_get_name(priv->adc_div_clk);

drivers/iio/adc/qcom-spmi-adc5.c

@@ -423,6 +423,7 @@ struct adc5_channels {
 	enum vadc_scale_fn_type scale_fn_type;
 };
 
+/* In these definitions, _pre refers to an index into adc5_prescale_ratios. */
 #define ADC5_CHAN(_dname, _type, _mask, _pre, _scale)			\
 	{								\
 		.datasheet_name = _dname,				\
@@ -443,63 +444,63 @@ struct adc5_channels {
 		  _pre, _scale)						\
 
 static const struct adc5_channels adc5_chans_pmic[ADC5_MAX_CHANNEL] = {
-	[ADC5_REF_GND]		= ADC5_CHAN_VOLT("ref_gnd", 1,
+	[ADC5_REF_GND]		= ADC5_CHAN_VOLT("ref_gnd", 0,
 					SCALE_HW_CALIB_DEFAULT)
-	[ADC5_1P25VREF]		= ADC5_CHAN_VOLT("vref_1p25", 1,
+	[ADC5_1P25VREF]		= ADC5_CHAN_VOLT("vref_1p25", 0,
 					SCALE_HW_CALIB_DEFAULT)
-	[ADC5_VPH_PWR]		= ADC5_CHAN_VOLT("vph_pwr", 3,
+	[ADC5_VPH_PWR]		= ADC5_CHAN_VOLT("vph_pwr", 1,
 					SCALE_HW_CALIB_DEFAULT)
-	[ADC5_VBAT_SNS]		= ADC5_CHAN_VOLT("vbat_sns", 3,
+	[ADC5_VBAT_SNS]		= ADC5_CHAN_VOLT("vbat_sns", 1,
 					SCALE_HW_CALIB_DEFAULT)
-	[ADC5_DIE_TEMP]		= ADC5_CHAN_TEMP("die_temp", 1,
+	[ADC5_DIE_TEMP]		= ADC5_CHAN_TEMP("die_temp", 0,
 					SCALE_HW_CALIB_PMIC_THERM)
-	[ADC5_USB_IN_I]		= ADC5_CHAN_VOLT("usb_in_i_uv", 1,
+	[ADC5_USB_IN_I]		= ADC5_CHAN_VOLT("usb_in_i_uv", 0,
 					SCALE_HW_CALIB_DEFAULT)
-	[ADC5_USB_IN_V_16]	= ADC5_CHAN_VOLT("usb_in_v_div_16", 16,
+	[ADC5_USB_IN_V_16]	= ADC5_CHAN_VOLT("usb_in_v_div_16", 8,
 					SCALE_HW_CALIB_DEFAULT)
-	[ADC5_CHG_TEMP]		= ADC5_CHAN_TEMP("chg_temp", 1,
+	[ADC5_CHG_TEMP]		= ADC5_CHAN_TEMP("chg_temp", 0,
 					SCALE_HW_CALIB_PM5_CHG_TEMP)
 	/* Charger prescales SBUx and MID_CHG to fit within 1.8V upper unit */
-	[ADC5_SBUx]		= ADC5_CHAN_VOLT("chg_sbux", 3,
+	[ADC5_SBUx]		= ADC5_CHAN_VOLT("chg_sbux", 1,
 					SCALE_HW_CALIB_DEFAULT)
-	[ADC5_MID_CHG_DIV6]	= ADC5_CHAN_VOLT("chg_mid_chg", 6,
+	[ADC5_MID_CHG_DIV6]	= ADC5_CHAN_VOLT("chg_mid_chg", 3,
 					SCALE_HW_CALIB_DEFAULT)
-	[ADC5_XO_THERM_100K_PU]	= ADC5_CHAN_TEMP("xo_therm", 1,
+	[ADC5_XO_THERM_100K_PU]	= ADC5_CHAN_TEMP("xo_therm", 0,
 					SCALE_HW_CALIB_XOTHERM)
-	[ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 1,
+	[ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 0,
 					SCALE_HW_CALIB_THERM_100K_PULLUP)
-	[ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 1,
+	[ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 0,
 					SCALE_HW_CALIB_THERM_100K_PULLUP)
-	[ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 1,
+	[ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 0,
 					SCALE_HW_CALIB_THERM_100K_PULLUP)
-	[ADC5_AMUX_THM2]	= ADC5_CHAN_TEMP("amux_thm2", 1,
+	[ADC5_AMUX_THM2]	= ADC5_CHAN_TEMP("amux_thm2", 0,
 					SCALE_HW_CALIB_PM5_SMB_TEMP)
 };
 
 static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = {
-	[ADC5_REF_GND]		= ADC5_CHAN_VOLT("ref_gnd", 1,
+	[ADC5_REF_GND]		= ADC5_CHAN_VOLT("ref_gnd", 0,
 					SCALE_HW_CALIB_DEFAULT)
-	[ADC5_1P25VREF]		= ADC5_CHAN_VOLT("vref_1p25", 1,
+	[ADC5_1P25VREF]		= ADC5_CHAN_VOLT("vref_1p25", 0,
 					SCALE_HW_CALIB_DEFAULT)
-	[ADC5_VPH_PWR]		= ADC5_CHAN_VOLT("vph_pwr", 3,
+	[ADC5_VPH_PWR]		= ADC5_CHAN_VOLT("vph_pwr", 1,
 					SCALE_HW_CALIB_DEFAULT)
-	[ADC5_VBAT_SNS]		= ADC5_CHAN_VOLT("vbat_sns", 3,
+	[ADC5_VBAT_SNS]		= ADC5_CHAN_VOLT("vbat_sns", 1,
 					SCALE_HW_CALIB_DEFAULT)
-	[ADC5_VCOIN]		= ADC5_CHAN_VOLT("vcoin", 3,
+	[ADC5_VCOIN]		= ADC5_CHAN_VOLT("vcoin", 1,
 					SCALE_HW_CALIB_DEFAULT)
-	[ADC5_DIE_TEMP]		= ADC5_CHAN_TEMP("die_temp", 1,
+	[ADC5_DIE_TEMP]		= ADC5_CHAN_TEMP("die_temp", 0,
 					SCALE_HW_CALIB_PMIC_THERM)
-	[ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 1,
+	[ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 0,
 					SCALE_HW_CALIB_THERM_100K_PULLUP)
-	[ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 1,
+	[ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 0,
 					SCALE_HW_CALIB_THERM_100K_PULLUP)
-	[ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 1,
+	[ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 0,
 					SCALE_HW_CALIB_THERM_100K_PULLUP)
-	[ADC5_AMUX_THM4_100K_PU] = ADC5_CHAN_TEMP("amux_thm4_100k_pu", 1,
+	[ADC5_AMUX_THM4_100K_PU] = ADC5_CHAN_TEMP("amux_thm4_100k_pu", 0,
 					SCALE_HW_CALIB_THERM_100K_PULLUP)
-	[ADC5_AMUX_THM5_100K_PU] = ADC5_CHAN_TEMP("amux_thm5_100k_pu", 1,
+	[ADC5_AMUX_THM5_100K_PU] = ADC5_CHAN_TEMP("amux_thm5_100k_pu", 0,
 					SCALE_HW_CALIB_THERM_100K_PULLUP)
-	[ADC5_XO_THERM_100K_PU]	= ADC5_CHAN_TEMP("xo_therm_100k_pu", 1,
+	[ADC5_XO_THERM_100K_PU]	= ADC5_CHAN_TEMP("xo_therm_100k_pu", 0,
 					SCALE_HW_CALIB_THERM_100K_PULLUP)
 };
 
@@ -558,6 +559,9 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
 			return ret;
 		}
 		prop->prescale = ret;
+	} else {
+		prop->prescale =
+			adc->data->adc_chans[prop->channel].prescale_index;
 	}
 
 	ret = of_property_read_u32(node, "qcom,hw-settle-time", &value);

drivers/iio/adc/stm32-adc-core.c

@@ -16,6 +16,7 @@
 #include <linux/irqdomain.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 
@@ -48,15 +49,19 @@
 #define STM32H7_CKMODE_SHIFT		16
 #define STM32H7_CKMODE_MASK		GENMASK(17, 16)
 
+#define STM32_ADC_CORE_SLEEP_DELAY_MS	2000
+
 /**
  * stm32_adc_common_regs - stm32 common registers, compatible dependent data
  * @csr:	common status register offset
+ * @ccr:	common control register offset
  * @eoc1:	adc1 end of conversion flag in @csr
  * @eoc2:	adc2 end of conversion flag in @csr
  * @eoc3:	adc3 end of conversion flag in @csr
  */
 struct stm32_adc_common_regs {
 	u32 csr;
+	u32 ccr;
 	u32 eoc1_msk;
 	u32 eoc2_msk;
 	u32 eoc3_msk;
@@ -85,6 +90,7 @@ struct stm32_adc_priv_cfg {
  * @vref:		regulator reference
  * @cfg:		compatible configuration data
  * @common:		common data for all ADC instances
+ * @ccr_bak:		backup CCR in low power mode
  */
 struct stm32_adc_priv {
 	int				irq[STM32_ADC_MAX_ADCS];
@@ -94,6 +100,7 @@ struct stm32_adc_priv {
 	struct regulator		*vref;
 	const struct stm32_adc_priv_cfg	*cfg;
 	struct stm32_adc_common		common;
+	u32				ccr_bak;
 };
 
 static struct stm32_adc_priv *to_stm32_adc_priv(struct stm32_adc_common *com)
@@ -265,6 +272,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
 /* STM32F4 common registers definitions */
 static const struct stm32_adc_common_regs stm32f4_adc_common_regs = {
 	.csr = STM32F4_ADC_CSR,
+	.ccr = STM32F4_ADC_CCR,
 	.eoc1_msk = STM32F4_EOC1,
 	.eoc2_msk = STM32F4_EOC2,
 	.eoc3_msk = STM32F4_EOC3,
@@ -273,6 +281,7 @@ static const struct stm32_adc_common_regs stm32f4_adc_common_regs = {
 /* STM32H7 common registers definitions */
 static const struct stm32_adc_common_regs stm32h7_adc_common_regs = {
 	.csr = STM32H7_ADC_CSR,
+	.ccr = STM32H7_ADC_CCR,
 	.eoc1_msk = STM32H7_EOC_MST,
 	.eoc2_msk = STM32H7_EOC_SLV,
 };
@@ -379,6 +388,61 @@ static void stm32_adc_irq_remove(struct platform_device *pdev,
 	}
 }
 
+static int stm32_adc_core_hw_start(struct device *dev)
+{
+	struct stm32_adc_common *common = dev_get_drvdata(dev);
+	struct stm32_adc_priv *priv = to_stm32_adc_priv(common);
+	int ret;
+
+	ret = regulator_enable(priv->vref);
+	if (ret < 0) {
+		dev_err(dev, "vref enable failed\n");
+		return ret;
+	}
+
+	if (priv->bclk) {
+		ret = clk_prepare_enable(priv->bclk);
+		if (ret < 0) {
+			dev_err(dev, "bus clk enable failed\n");
+			goto err_regulator_disable;
+		}
+	}
+
+	if (priv->aclk) {
+		ret = clk_prepare_enable(priv->aclk);
+		if (ret < 0) {
+			dev_err(dev, "adc clk enable failed\n");
+			goto err_bclk_disable;
+		}
+	}
+
+	writel_relaxed(priv->ccr_bak, priv->common.base + priv->cfg->regs->ccr);
+
+	return 0;
+
+err_bclk_disable:
+	if (priv->bclk)
+		clk_disable_unprepare(priv->bclk);
+err_regulator_disable:
+	regulator_disable(priv->vref);
+
+	return ret;
+}
+
+static void stm32_adc_core_hw_stop(struct device *dev)
+{
+	struct stm32_adc_common *common = dev_get_drvdata(dev);
+	struct stm32_adc_priv *priv = to_stm32_adc_priv(common);
+
+	/* Backup CCR that may be lost (depends on power state to achieve) */
+	priv->ccr_bak = readl_relaxed(priv->common.base + priv->cfg->regs->ccr);
+	if (priv->aclk)
+		clk_disable_unprepare(priv->aclk);
+	if (priv->bclk)
+		clk_disable_unprepare(priv->bclk);
+	regulator_disable(priv->vref);
+}
+
 static int stm32_adc_probe(struct platform_device *pdev)
 {
 	struct stm32_adc_priv *priv;
@@ -393,6 +457,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
+	platform_set_drvdata(pdev, &priv->common);
 
 	priv->cfg = (const struct stm32_adc_priv_cfg *)
 		of_match_device(dev->driver->of_match_table, dev)->data;
@@ -410,67 +475,51 @@ static int stm32_adc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = regulator_enable(priv->vref);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "vref enable failed\n");
-		return ret;
-	}
-
-	ret = regulator_get_voltage(priv->vref);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "vref get voltage failed, %d\n", ret);
-		goto err_regulator_disable;
-	}
-	priv->common.vref_mv = ret / 1000;
-	dev_dbg(&pdev->dev, "vref+=%dmV\n", priv->common.vref_mv);
-
 	priv->aclk = devm_clk_get(&pdev->dev, "adc");
 	if (IS_ERR(priv->aclk)) {
 		ret = PTR_ERR(priv->aclk);
-		if (ret == -ENOENT) {
-			priv->aclk = NULL;
-		} else {
+		if (ret != -ENOENT) {
 			dev_err(&pdev->dev, "Can't get 'adc' clock\n");
-			goto err_regulator_disable;
-		}
-	}
-
-	if (priv->aclk) {
-		ret = clk_prepare_enable(priv->aclk);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "adc clk enable failed\n");
-			goto err_regulator_disable;
+			return ret;
 		}
+		priv->aclk = NULL;
 	}
 
 	priv->bclk = devm_clk_get(&pdev->dev, "bus");
 	if (IS_ERR(priv->bclk)) {
 		ret = PTR_ERR(priv->bclk);
-		if (ret == -ENOENT) {
-			priv->bclk = NULL;
-		} else {
+		if (ret != -ENOENT) {
 			dev_err(&pdev->dev, "Can't get 'bus' clock\n");
-			goto err_aclk_disable;
+			return ret;
 		}
+		priv->bclk = NULL;
 	}
 
-	if (priv->bclk) {
-		ret = clk_prepare_enable(priv->bclk);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "adc clk enable failed\n");
-			goto err_aclk_disable;
-		}
+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_set_autosuspend_delay(dev, STM32_ADC_CORE_SLEEP_DELAY_MS);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_enable(dev);
+
+	ret = stm32_adc_core_hw_start(dev);
+	if (ret)
+		goto err_pm_stop;
+
+	ret = regulator_get_voltage(priv->vref);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "vref get voltage failed, %d\n", ret);
+		goto err_hw_stop;
 	}
+	priv->common.vref_mv = ret / 1000;
+	dev_dbg(&pdev->dev, "vref+=%dmV\n", priv->common.vref_mv);
 
 	ret = priv->cfg->clk_sel(pdev, priv);
 	if (ret < 0)
-		goto err_bclk_disable;
+		goto err_hw_stop;
 
 	ret = stm32_adc_irq_probe(pdev, priv);
 	if (ret < 0)
-		goto err_bclk_disable;
-
-	platform_set_drvdata(pdev, &priv->common);
+		goto err_hw_stop;
 
 	ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
 	if (ret < 0) {
@@ -478,21 +527,19 @@ static int stm32_adc_probe(struct platform_device *pdev)
 		goto err_irq_remove;
 	}
 
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
 	return 0;
 
 err_irq_remove:
 	stm32_adc_irq_remove(pdev, priv);
-
-err_bclk_disable:
-	if (priv->bclk)
-		clk_disable_unprepare(priv->bclk);
-
-err_aclk_disable:
-	if (priv->aclk)
-		clk_disable_unprepare(priv->aclk);
-
-err_regulator_disable:
-	regulator_disable(priv->vref);
+err_hw_stop:
+	stm32_adc_core_hw_stop(dev);
+err_pm_stop:
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+	pm_runtime_put_noidle(dev);
 
 	return ret;
 }
@@ -502,17 +549,39 @@ static int stm32_adc_remove(struct platform_device *pdev)
 	struct stm32_adc_common *common = platform_get_drvdata(pdev);
 	struct stm32_adc_priv *priv = to_stm32_adc_priv(common);
 
+	pm_runtime_get_sync(&pdev->dev);
 	of_platform_depopulate(&pdev->dev);
 	stm32_adc_irq_remove(pdev, priv);
-	if (priv->bclk)
-		clk_disable_unprepare(priv->bclk);
-	if (priv->aclk)
-		clk_disable_unprepare(priv->aclk);
-	regulator_disable(priv->vref);
+	stm32_adc_core_hw_stop(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
 
 	return 0;
 }
 
+#if defined(CONFIG_PM)
+static int stm32_adc_core_runtime_suspend(struct device *dev)
+{
+	stm32_adc_core_hw_stop(dev);
+
+	return 0;
+}
+
+static int stm32_adc_core_runtime_resume(struct device *dev)
+{
+	return stm32_adc_core_hw_start(dev);
+}
+#endif
+
+static const struct dev_pm_ops stm32_adc_core_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(stm32_adc_core_runtime_suspend,
+			   stm32_adc_core_runtime_resume,
+			   NULL)
+};
+
 static const struct stm32_adc_priv_cfg stm32f4_adc_priv_cfg = {
 	.regs = &stm32f4_adc_common_regs,
 	.clk_sel = stm32f4_adc_clk_sel,
@@ -552,6 +621,7 @@ static struct platform_driver stm32_adc_driver = {
 	.driver = {
 		.name = "stm32-adc-core",
 		.of_match_table = stm32_adc_of_match,
+		.pm = &stm32_adc_core_pm_ops,
 	},
 };
 module_platform_driver(stm32_adc_driver);

drivers/iio/common/hid-sensors/hid-sensor-attributes.c

@@ -336,7 +336,7 @@ static void adjust_exponent_nano(int *val0, int *val1, int scale0,
 			scale1 = scale1 % pow_10(8 - i);
 		}
 		*val0 += res;
-			*val1 = scale1 * pow_10(exp);
+		*val1 = scale1 * pow_10(exp);
 	} else if (exp < 0) {
 		exp = abs(exp);
 		if (exp > 9) {

drivers/iio/dac/ad5686-spi.c

@@ -19,6 +19,12 @@ static int ad5686_spi_write(struct ad5686_state *st,
 	u8 tx_len, *buf;
 
 	switch (st->chip_info->regmap_type) {
+	case AD5310_REGMAP:
+		st->data[0].d16 = cpu_to_be16(AD5310_CMD(cmd) |
+					      val);
+		buf = &st->data[0].d8[0];
+		tx_len = 2;
+		break;
 	case AD5683_REGMAP:
 		st->data[0].d32 = cpu_to_be32(AD5686_CMD(cmd) |
 					      AD5683_DATA(val));
@@ -56,10 +62,18 @@ static int ad5686_spi_read(struct ad5686_state *st, u8 addr)
 	u8 cmd = 0;
 	int ret;
 
-	if (st->chip_info->regmap_type == AD5686_REGMAP)
-		cmd = AD5686_CMD_READBACK_ENABLE;
-	else if (st->chip_info->regmap_type == AD5683_REGMAP)
+	switch (st->chip_info->regmap_type) {
+	case AD5310_REGMAP:
+		return -ENOTSUPP;
+	case AD5683_REGMAP:
 		cmd = AD5686_CMD_READBACK_ENABLE_V2;
+		break;
+	case AD5686_REGMAP:
+		cmd = AD5686_CMD_READBACK_ENABLE;
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	st->data[0].d32 = cpu_to_be32(AD5686_CMD(cmd) |
 				      AD5686_ADDR(addr));
@@ -86,6 +100,7 @@ static int ad5686_spi_remove(struct spi_device *spi)
 }
 
 static const struct spi_device_id ad5686_spi_id[] = {
+	{"ad5310r", ID_AD5310R},
 	{"ad5672r", ID_AD5672R},
 	{"ad5676", ID_AD5676},
 	{"ad5676r", ID_AD5676R},

drivers/iio/dac/ad5686.c

@@ -83,6 +83,10 @@ static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev,
 		st->pwr_down_mask &= ~(0x3 << (chan->channel * 2));
 
 	switch (st->chip_info->regmap_type) {
+	case AD5310_REGMAP:
+		shift = 9;
+		ref_bit_msk = AD5310_REF_BIT_MSK;
+		break;
 	case AD5683_REGMAP:
 		shift = 13;
 		ref_bit_msk = AD5683_REF_BIT_MSK;
@@ -124,7 +128,8 @@ static int ad5686_read_raw(struct iio_dev *indio_dev,
 		mutex_unlock(&indio_dev->mlock);
 		if (ret < 0)
 			return ret;
-		*val = ret;
+		*val = (ret >> chan->scan_type.shift) &
+			GENMASK(chan->scan_type.realbits - 1, 0);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		*val = st->vref_mv;
@@ -221,6 +226,7 @@ static struct iio_chan_spec name[] = {				\
 		AD5868_CHANNEL(7, 7, bits, _shift),		\
 }
 
+DECLARE_AD5693_CHANNELS(ad5310r_channels, 10, 2);
 DECLARE_AD5693_CHANNELS(ad5311r_channels, 10, 6);
 DECLARE_AD5676_CHANNELS(ad5672_channels, 12, 4);
 DECLARE_AD5676_CHANNELS(ad5676_channels, 16, 0);
@@ -232,6 +238,12 @@ DECLARE_AD5693_CHANNELS(ad5692r_channels, 14, 2);
 DECLARE_AD5693_CHANNELS(ad5691r_channels, 12, 4);
 
 static const struct ad5686_chip_info ad5686_chip_info_tbl[] = {
+	[ID_AD5310R] = {
+		.channels = ad5310r_channels,
+		.int_vref_mv = 2500,
+		.num_channels = 1,
+		.regmap_type = AD5310_REGMAP,
+	},
 	[ID_AD5311R] = {
 		.channels = ad5311r_channels,
 		.int_vref_mv = 2500,
@@ -419,6 +431,11 @@ int ad5686_probe(struct device *dev,
 	indio_dev->num_channels = st->chip_info->num_channels;
 
 	switch (st->chip_info->regmap_type) {
+	case AD5310_REGMAP:
+		cmd = AD5686_CMD_CONTROL_REG;
+		ref_bit_msk = AD5310_REF_BIT_MSK;
+		st->use_internal_vref = !voltage_uv;
+		break;
 	case AD5683_REGMAP:
 		cmd = AD5686_CMD_CONTROL_REG;
 		ref_bit_msk = AD5683_REF_BIT_MSK;

drivers/iio/dac/ad5686.h

@@ -13,7 +13,10 @@
 #include <linux/mutex.h>
 #include <linux/kernel.h>
 
+#define AD5310_CMD(x)				((x) << 12)
+
 #define AD5683_DATA(x)				((x) << 4)
+
 #define AD5686_ADDR(x)				((x) << 16)
 #define AD5686_CMD(x)				((x) << 20)
 
@@ -38,6 +41,8 @@
 
 #define AD5686_CMD_CONTROL_REG			0x4
 #define AD5686_CMD_READBACK_ENABLE_V2		0x5
+
+#define AD5310_REF_BIT_MSK			BIT(8)
 #define AD5683_REF_BIT_MSK			BIT(12)
 #define AD5693_REF_BIT_MSK			BIT(12)
 
@@ -45,6 +50,7 @@
  * ad5686_supported_device_ids:
  */
 enum ad5686_supported_device_ids {
+	ID_AD5310R,
 	ID_AD5311R,
 	ID_AD5671R,
 	ID_AD5672R,
@@ -72,6 +78,7 @@ enum ad5686_supported_device_ids {
 };
 
 enum ad5686_regmap_type {
+	AD5310_REGMAP,
 	AD5683_REGMAP,
 	AD5686_REGMAP,
 	AD5693_REGMAP

drivers/iio/imu/bmi160/bmi160.h

@@ -6,6 +6,5 @@ extern const struct regmap_config bmi160_regmap_config;
 
 int bmi160_core_probe(struct device *dev, struct regmap *regmap,
 		      const char *name, bool use_spi);
-void bmi160_core_remove(struct device *dev);
 
 #endif  /* BMI160_H_ */

drivers/iio/imu/bmi160/bmi160_core.c

@@ -542,10 +542,12 @@ static int bmi160_chip_init(struct bmi160_data *data, bool use_spi)
 	return 0;
 }
 
-static void bmi160_chip_uninit(struct bmi160_data *data)
+static void bmi160_chip_uninit(void *data)
 {
-	bmi160_set_mode(data, BMI160_GYRO, false);
-	bmi160_set_mode(data, BMI160_ACCEL, false);
+	struct bmi160_data *bmi_data = data;
+
+	bmi160_set_mode(bmi_data, BMI160_GYRO, false);
+	bmi160_set_mode(bmi_data, BMI160_ACCEL, false);
 }
 
 int bmi160_core_probe(struct device *dev, struct regmap *regmap,
@@ -567,6 +569,10 @@ int bmi160_core_probe(struct device *dev, struct regmap *regmap,
 	if (ret < 0)
 		return ret;
 
+	ret = devm_add_action_or_reset(dev, bmi160_chip_uninit, data);
+	if (ret < 0)
+		return ret;
+
 	if (!name && ACPI_HANDLE(dev))
 		name = bmi160_match_acpi_device(dev);
 
@@ -577,35 +583,19 @@ int bmi160_core_probe(struct device *dev, struct regmap *regmap,
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &bmi160_info;
 
-	ret = iio_triggered_buffer_setup(indio_dev, NULL,
-					 bmi160_trigger_handler, NULL);
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+					      bmi160_trigger_handler, NULL);
 	if (ret < 0)
-		goto uninit;
+		return ret;
 
-	ret = iio_device_register(indio_dev);
+	ret = devm_iio_device_register(dev, indio_dev);
 	if (ret < 0)
-		goto buffer_cleanup;
+		return ret;
 
 	return 0;
-buffer_cleanup:
-	iio_triggered_buffer_cleanup(indio_dev);
-uninit:
-	bmi160_chip_uninit(data);
-	return ret;
 }
 EXPORT_SYMBOL_GPL(bmi160_core_probe);
 
-void bmi160_core_remove(struct device *dev)
-{
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct bmi160_data *data = iio_priv(indio_dev);
-
-	iio_device_unregister(indio_dev);
-	iio_triggered_buffer_cleanup(indio_dev);
-	bmi160_chip_uninit(data);
-}
-EXPORT_SYMBOL_GPL(bmi160_core_remove);
-
 MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com");
 MODULE_DESCRIPTION("Bosch BMI160 driver");
 MODULE_LICENSE("GPL v2");

drivers/iio/imu/bmi160/bmi160_i2c.c

@@ -38,13 +38,6 @@ static int bmi160_i2c_probe(struct i2c_client *client,
 	return bmi160_core_probe(&client->dev, regmap, name, false);
 }
 
-static int bmi160_i2c_remove(struct i2c_client *client)
-{
-	bmi160_core_remove(&client->dev);
-
-	return 0;
-}
-
 static const struct i2c_device_id bmi160_i2c_id[] = {
 	{"bmi160", 0},
 	{}
@@ -72,7 +65,6 @@ static struct i2c_driver bmi160_i2c_driver = {
 		.of_match_table		= of_match_ptr(bmi160_of_match),
 	},
 	.probe		= bmi160_i2c_probe,
-	.remove		= bmi160_i2c_remove,
 	.id_table	= bmi160_i2c_id,
 };
 module_i2c_driver(bmi160_i2c_driver);

drivers/iio/imu/bmi160/bmi160_spi.c

@@ -29,13 +29,6 @@ static int bmi160_spi_probe(struct spi_device *spi)
 	return bmi160_core_probe(&spi->dev, regmap, id->name, true);
 }
 
-static int bmi160_spi_remove(struct spi_device *spi)
-{
-	bmi160_core_remove(&spi->dev);
-
-	return 0;
-}
-
 static const struct spi_device_id bmi160_spi_id[] = {
 	{"bmi160", 0},
 	{}
@@ -58,7 +51,6 @@ MODULE_DEVICE_TABLE(of, bmi160_of_match);
 
 static struct spi_driver bmi160_spi_driver = {
 	.probe		= bmi160_spi_probe,
-	.remove		= bmi160_spi_remove,
 	.id_table	= bmi160_spi_id,
 	.driver = {
 		.acpi_match_table	= ACPI_PTR(bmi160_acpi_match),

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c

@@ -432,8 +432,8 @@ st_lsm6dsx_shub_read_oneshot(struct st_lsm6dsx_sensor *sensor,
 			     struct iio_chan_spec const *ch,
 			     int *val)
 {
-	int err, delay, len = ch->scan_type.realbits >> 3;
-	__le16 data;
+	int err, delay, len;
+	u8 data[4];
 
 	err = st_lsm6dsx_shub_set_enable(sensor, true);
 	if (err < 0)
@@ -442,15 +442,17 @@ st_lsm6dsx_shub_read_oneshot(struct st_lsm6dsx_sensor *sensor,
 	delay = 1000000 / sensor->odr;
 	usleep_range(delay, 2 * delay);
 
-	err = st_lsm6dsx_shub_read(sensor, ch->address, (u8 *)&data, len);
-	if (err < 0)
-		return err;
+	len = min_t(int, sizeof(data), ch->scan_type.realbits >> 3);
+	err = st_lsm6dsx_shub_read(sensor, ch->address, data, len);
 
 	st_lsm6dsx_shub_set_enable(sensor, false);
 
+	if (err < 0)
+		return err;
+
 	switch (len) {
 	case 2:
-		*val = (s16)le16_to_cpu(data);
+		*val = (s16)le16_to_cpu(*((__le16 *)data));
 		break;
 	default:
 		return -EINVAL;

drivers/iio/industrialio-core.c

@@ -1671,6 +1671,9 @@ int __iio_device_register(struct iio_dev *indio_dev, struct module *this_mod)
 	if (ret < 0)
 		return ret;
 
+	if (!indio_dev->info)
+		return -EINVAL;
+
 	/* configure elements for the chrdev */
 	indio_dev->dev.devt = MKDEV(MAJOR(iio_devt), indio_dev->id);
 

drivers/iio/magnetometer/ak8975.c

@@ -790,6 +790,7 @@ static const struct acpi_device_id ak_acpi_match[] = {
 	{"INVN6500", AK8963},
 	{"AK009911", AK09911},
 	{"AK09911", AK09911},
+	{"AKM9911", AK09911},
 	{"AK09912", AK09912},
 	{ },
 };

drivers/iio/potentiometer/Kconfig

@@ -90,6 +90,18 @@ config MCP4531
 	  To compile this driver as a module, choose M here: the
 	  module will be called mcp4531.
 
+config MCP41010
+	tristate "Microchip MCP41xxx/MCP42xxx Digital Potentiometer driver"
+	depends on SPI
+	help
+	  Say yes here to build support for the Microchip
+	  MCP41010, MCP41050, MCP41100,
+	  MCP42010, MCP42050, MCP42100
+	  digital potentiometer chips.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mcp41010.
+
 config TPL0102
 	tristate "Texas Instruments digital potentiometer driver"
 	depends on I2C

drivers/iio/potentiometer/Makefile

@@ -11,4 +11,5 @@ obj-$(CONFIG_MAX5487) += max5487.o
 obj-$(CONFIG_MCP4018) += mcp4018.o
 obj-$(CONFIG_MCP4131) += mcp4131.o
 obj-$(CONFIG_MCP4531) += mcp4531.o
+obj-$(CONFIG_MCP41010) += mcp41010.o
 obj-$(CONFIG_TPL0102) += tpl0102.o

drivers/iio/potentiometer/mcp41010.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Industrial I/O driver for Microchip digital potentiometers
+ *
+ * Copyright (c) 2018 Chris Coffey <cmc@babblebit.net>
+ * Based on: Slawomir Stepien's code from mcp4131.c
+ *
+ * Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
+ *
+ * DEVID	#Wipers	#Positions	Resistance (kOhm)
+ * mcp41010	1	256		10
+ * mcp41050	1	256		50
+ * mcp41100	1	256		100
+ * mcp42010	2	256		10
+ * mcp42050	2	256		50
+ * mcp42100	2	256		100
+ */
+
+#include <linux/cache.h>
+#include <linux/err.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/types.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/spi/spi.h>
+
+#define MCP41010_MAX_WIPERS	2
+#define MCP41010_WRITE		BIT(4)
+#define MCP41010_WIPER_MAX	255
+#define MCP41010_WIPER_CHANNEL	BIT(0)
+
+struct mcp41010_cfg {
+	char name[16];
+	int wipers;
+	int kohms;
+};
+
+enum mcp41010_type {
+	MCP41010,
+	MCP41050,
+	MCP41100,
+	MCP42010,
+	MCP42050,
+	MCP42100,
+};
+
+static const struct mcp41010_cfg mcp41010_cfg[] = {
+	[MCP41010] = { .name = "mcp41010", .wipers = 1, .kohms =  10, },
+	[MCP41050] = { .name = "mcp41050", .wipers = 1, .kohms =  50, },
+	[MCP41100] = { .name = "mcp41100", .wipers = 1, .kohms = 100, },
+	[MCP42010] = { .name = "mcp42010", .wipers = 2, .kohms =  10, },
+	[MCP42050] = { .name = "mcp42050", .wipers = 2, .kohms =  50, },
+	[MCP42100] = { .name = "mcp42100", .wipers = 2, .kohms = 100, },
+};
+
+struct mcp41010_data {
+	struct spi_device *spi;
+	const struct mcp41010_cfg *cfg;
+	struct mutex lock; /* Protect write sequences */
+	unsigned int value[MCP41010_MAX_WIPERS]; /* Cache wiper values */
+	u8 buf[2] ____cacheline_aligned;
+};
+
+#define MCP41010_CHANNEL(ch) {					\
+	.type = IIO_RESISTANCE,					\
+	.indexed = 1,						\
+	.output = 1,						\
+	.channel = (ch),					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+}
+
+static const struct iio_chan_spec mcp41010_channels[] = {
+	MCP41010_CHANNEL(0),
+	MCP41010_CHANNEL(1),
+};
+
+static int mcp41010_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct mcp41010_data *data = iio_priv(indio_dev);
+	int channel = chan->channel;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		*val = data->value[channel];
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		*val = 1000 * data->cfg->kohms;
+		*val2 = MCP41010_WIPER_MAX;
+		return IIO_VAL_FRACTIONAL;
+	}
+
+	return -EINVAL;
+}
+
+static int mcp41010_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	int err;
+	struct mcp41010_data *data = iio_priv(indio_dev);
+	int channel = chan->channel;
+
+	if (mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	if (val > MCP41010_WIPER_MAX || val < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+
+	data->buf[0] = MCP41010_WIPER_CHANNEL << channel;
+	data->buf[0] |= MCP41010_WRITE;
+	data->buf[1] = val & 0xff;
+
+	err = spi_write(data->spi, data->buf, sizeof(data->buf));
+	if (!err)
+		data->value[channel] = val;
+
+	mutex_unlock(&data->lock);
+
+	return err;
+}
+
+static const struct iio_info mcp41010_info = {
+	.read_raw = mcp41010_read_raw,
+	.write_raw = mcp41010_write_raw,
+};
+
+static int mcp41010_probe(struct spi_device *spi)
+{
+	int err;
+	struct device *dev = &spi->dev;
+	struct mcp41010_data *data;
+	struct iio_dev *indio_dev;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	spi_set_drvdata(spi, indio_dev);
+	data->spi = spi;
+	data->cfg = of_device_get_match_data(&spi->dev);
+	if (!data->cfg)
+		data->cfg = &mcp41010_cfg[spi_get_device_id(spi)->driver_data];
+
+	mutex_init(&data->lock);
+
+	indio_dev->dev.parent = dev;
+	indio_dev->info = &mcp41010_info;
+	indio_dev->channels = mcp41010_channels;
+	indio_dev->num_channels = data->cfg->wipers;
+	indio_dev->name = data->cfg->name;
+
+	err = devm_iio_device_register(dev, indio_dev);
+	if (err)
+		dev_info(&spi->dev, "Unable to register %s\n", indio_dev->name);
+
+	return err;
+}
+
+static const struct of_device_id mcp41010_match[] = {
+	{ .compatible = "microchip,mcp41010", .data = &mcp41010_cfg[MCP41010] },
+	{ .compatible = "microchip,mcp41050", .data = &mcp41010_cfg[MCP41050] },
+	{ .compatible = "microchip,mcp41100", .data = &mcp41010_cfg[MCP41100] },
+	{ .compatible = "microchip,mcp42010", .data = &mcp41010_cfg[MCP42010] },
+	{ .compatible = "microchip,mcp42050", .data = &mcp41010_cfg[MCP42050] },
+	{ .compatible = "microchip,mcp42100", .data = &mcp41010_cfg[MCP42100] },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mcp41010_match);
+
+static const struct spi_device_id mcp41010_id[] = {
+	{ "mcp41010", MCP41010 },
+	{ "mcp41050", MCP41050 },
+	{ "mcp41100", MCP41100 },
+	{ "mcp42010", MCP42010 },
+	{ "mcp42050", MCP42050 },
+	{ "mcp42100", MCP42100 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, mcp41010_id);
+
+static struct spi_driver mcp41010_driver = {
+	.driver = {
+		.name	= "mcp41010",
+		.of_match_table = mcp41010_match,
+	},
+	.probe		= mcp41010_probe,
+	.id_table	= mcp41010_id,
+};
+
+module_spi_driver(mcp41010_driver);
+
+MODULE_AUTHOR("Chris Coffey <cmc@babblebit.net>");
+MODULE_DESCRIPTION("MCP41010 digital potentiometer");
+MODULE_LICENSE("GPL v2");

drivers/iio/resolver/Kconfig

@@ -3,6 +3,16 @@
 #
 menu "Resolver to digital converters"
 
+config AD2S90
+	tristate "Analog Devices ad2s90 driver"
+	depends on SPI
+	help
+	  Say yes here to build support for Analog Devices spi resolver
+	  to digital converters, ad2s90, provides direct access via sysfs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad2s90.
+
 config AD2S1200
 	tristate "Analog Devices ad2s1200/ad2s1205 driver"
 	depends on SPI

drivers/iio/resolver/Makefile

@@ -2,4 +2,5 @@
 # Makefile for Resolver/Synchro drivers
 #
 
+obj-$(CONFIG_AD2S90) += ad2s90.o
 obj-$(CONFIG_AD2S1200) += ad2s1200.o

drivers/staging/iio/resolver/ad2s90.c → drivers/iio/resolver/ad2s90.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * ad2s90.c simple support for the ADI Resolver to Digital Converters: AD2S90
  *
  * Copyright (c) 2010-2010 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 #include <linux/types.h>
 #include <linux/mutex.h>
@@ -19,8 +15,14 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 
+/*
+ * Although chip's max frequency is 2Mhz, it needs 600ns between CS and the
+ * first falling edge of SCLK, so frequency should be at most 1 / (2 * 6e-7)
+ */
+#define AD2S90_MAX_SPI_FREQ_HZ  830000
+
 struct ad2s90_state {
-	struct mutex lock;
+	struct mutex lock; /* lock to protect rx buffer */
 	struct spi_device *sdev;
 	u8 rx[2] ____cacheline_aligned;
 };
@@ -77,7 +79,12 @@ static int ad2s90_probe(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev;
 	struct ad2s90_state *st;
-	int ret;
+
+	if (spi->max_speed_hz > AD2S90_MAX_SPI_FREQ_HZ) {
+		dev_err(&spi->dev, "SPI CLK, %d Hz exceeds %d Hz\n",
+			spi->max_speed_hz, AD2S90_MAX_SPI_FREQ_HZ);
+		return -EINVAL;
+	}
 
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
 	if (!indio_dev)
@@ -94,19 +101,15 @@ static int ad2s90_probe(struct spi_device *spi)
 	indio_dev->num_channels = 1;
 	indio_dev->name = spi_get_device_id(spi)->name;
 
-	/* need 600ns between CS and the first falling edge of SCLK */
-	spi->max_speed_hz = 830000;
-	spi->mode = SPI_MODE_3;
-	ret = spi_setup(spi);
-
-	if (ret < 0) {
-		dev_err(&spi->dev, "spi_setup failed!\n");
-		return ret;
-	}
-
 	return devm_iio_device_register(indio_dev->dev.parent, indio_dev);
 }
 
+static const struct of_device_id ad2s90_of_match[] = {
+	{ .compatible = "adi,ad2s90", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ad2s90_of_match);
+
 static const struct spi_device_id ad2s90_id[] = {
 	{ "ad2s90" },
 	{}
@@ -116,6 +119,7 @@ MODULE_DEVICE_TABLE(spi, ad2s90_id);
 static struct spi_driver ad2s90_driver = {
 	.driver = {
 		.name = "ad2s90",
+		.of_match_table = ad2s90_of_match,
 	},
 	.probe = ad2s90_probe,
 	.id_table = ad2s90_id,

drivers/staging/iio/adc/ad7280a.c

@@ -561,6 +561,7 @@ static int ad7280_attr_init(struct ad7280_state *st)
 {
 	int dev, ch, cnt;
 	unsigned int index;
+	struct iio_dev_attr *iio_attr;
 
 	st->iio_attr = devm_kcalloc(&st->spi->dev, 2, sizeof(*st->iio_attr) *
 				    (st->slave_num + 1) * AD7280A_CELLS_PER_DEV,
@@ -571,37 +572,35 @@ static int ad7280_attr_init(struct ad7280_state *st)
 	for (dev = 0, cnt = 0; dev <= st->slave_num; dev++)
 		for (ch = AD7280A_CELL_VOLTAGE_1; ch <= AD7280A_CELL_VOLTAGE_6;
 			ch++, cnt++) {
+			iio_attr = &st->iio_attr[cnt];
 			index = dev * AD7280A_CELLS_PER_DEV + ch;
-			st->iio_attr[cnt].address =
-				ad7280a_devaddr(dev) << 8 | ch;
-			st->iio_attr[cnt].dev_attr.attr.mode =
-				0644;
-			st->iio_attr[cnt].dev_attr.show =
-				ad7280_show_balance_sw;
-			st->iio_attr[cnt].dev_attr.store =
-				ad7280_store_balance_sw;
-			st->iio_attr[cnt].dev_attr.attr.name =
+			iio_attr->address = ad7280a_devaddr(dev) << 8 | ch;
+			iio_attr->dev_attr.attr.mode = 0644;
+			iio_attr->dev_attr.show = ad7280_show_balance_sw;
+			iio_attr->dev_attr.store = ad7280_store_balance_sw;
+			iio_attr->dev_attr.attr.name =
 				devm_kasprintf(&st->spi->dev, GFP_KERNEL,
 					       "in%d-in%d_balance_switch_en",
 					       index, index + 1);
-			ad7280_attributes[cnt] =
-				&st->iio_attr[cnt].dev_attr.attr;
+			if (!iio_attr->dev_attr.attr.name)
+				return -ENOMEM;
+
+			ad7280_attributes[cnt] = &iio_attr->dev_attr.attr;
 			cnt++;
-			st->iio_attr[cnt].address =
-				ad7280a_devaddr(dev) << 8 |
+			iio_attr = &st->iio_attr[cnt];
+			iio_attr->address = ad7280a_devaddr(dev) << 8 |
 				(AD7280A_CB1_TIMER + ch);
-			st->iio_attr[cnt].dev_attr.attr.mode =
-				0644;
-			st->iio_attr[cnt].dev_attr.show =
-				ad7280_show_balance_timer;
-			st->iio_attr[cnt].dev_attr.store =
-				ad7280_store_balance_timer;
-			st->iio_attr[cnt].dev_attr.attr.name =
+			iio_attr->dev_attr.attr.mode = 0644;
+			iio_attr->dev_attr.show = ad7280_show_balance_timer;
+			iio_attr->dev_attr.store = ad7280_store_balance_timer;
+			iio_attr->dev_attr.attr.name =
 				devm_kasprintf(&st->spi->dev, GFP_KERNEL,
 					       "in%d-in%d_balance_timer",
 					       index, index + 1);
-			ad7280_attributes[cnt] =
-				&st->iio_attr[cnt].dev_attr.attr;
+			if (!iio_attr->dev_attr.attr.name)
+				return -ENOMEM;
+
+			ad7280_attributes[cnt] = &iio_attr->dev_attr.attr;
 		}
 
 	ad7280_attributes[cnt] = NULL;
@@ -880,15 +879,15 @@ static int ad7280_probe(struct spi_device *spi)
 	if (ret < 0)
 		return ret;
 
-	ret = devm_add_action_or_reset(&spi->dev, ad7280_sw_power_down, st);
-	if (ret)
-		return ret;
-
 	st->slave_num = ret;
 	st->scan_cnt = (st->slave_num + 1) * AD7280A_NUM_CH;
 	st->cell_threshhigh = 0xFF;
 	st->aux_threshhigh = 0xFF;
 
+	ret = devm_add_action_or_reset(&spi->dev, ad7280_sw_power_down, st);
+	if (ret)
+		return ret;
+
 	/*
 	 * Total Conversion Time = ((tACQ + tCONV) *
 	 *			   (Number of Conversions per Part)) −

drivers/staging/iio/addac/adt7316-i2c.c

@@ -30,10 +30,6 @@ static int adt7316_i2c_read(void *client, u8 reg, u8 *data)
 	}
 
 	ret = i2c_smbus_read_byte(client);
-
-	if (!ret)
-		return -EIO;
-
 	if (ret < 0) {
 		dev_err(&cl->dev, "I2C read error\n");
 		return ret;
@@ -104,7 +100,6 @@ static int adt7316_i2c_probe(struct i2c_client *client,
 	struct adt7316_bus bus = {
 		.client = client,
 		.irq = client->irq,
-		.irq_flags = IRQF_TRIGGER_LOW,
 		.read = adt7316_i2c_read,
 		.write = adt7316_i2c_write,
 		.multi_read = adt7316_i2c_multi_read,
@@ -126,9 +121,22 @@ static const struct i2c_device_id adt7316_i2c_id[] = {
 
 MODULE_DEVICE_TABLE(i2c, adt7316_i2c_id);
 
+static const struct of_device_id adt7316_of_match[] = {
+	{ .compatible = "adi,adt7316" },
+	{ .compatible = "adi,adt7317" },
+	{ .compatible = "adi,adt7318" },
+	{ .compatible = "adi,adt7516" },
+	{ .compatible = "adi,adt7517" },
+	{ .compatible = "adi,adt7519" },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, adt7316_of_match);
+
 static struct i2c_driver adt7316_driver = {
 	.driver = {
 		.name = "adt7316",
+		.of_match_table = adt7316_of_match,
 		.pm = ADT7316_PM_OPS,
 	},
 	.probe = adt7316_i2c_probe,

drivers/staging/iio/addac/adt7316-spi.c

@@ -94,7 +94,6 @@ static int adt7316_spi_probe(struct spi_device *spi_dev)
 	struct adt7316_bus bus = {
 		.client = spi_dev,
 		.irq = spi_dev->irq,
-		.irq_flags = IRQF_TRIGGER_LOW,
 		.read = adt7316_spi_read,
 		.write = adt7316_spi_write,
 		.multi_read = adt7316_spi_multi_read,

drivers/staging/iio/addac/adt7316.c

@@ -177,7 +177,7 @@
 
 struct adt7316_chip_info {
 	struct adt7316_bus	bus;
-	u16			ldac_pin;
+	struct gpio_desc	*ldac_pin;
 	u16			int_mask;	/* 0x2f */
 	u8			config1;
 	u8			config2;
@@ -950,8 +950,8 @@ static ssize_t adt7316_store_update_DAC(struct device *dev,
 		if (ret)
 			return -EIO;
 	} else {
-		gpio_set_value(chip->ldac_pin, 0);
-		gpio_set_value(chip->ldac_pin, 1);
+		gpiod_set_value(chip->ldac_pin, 0);
+		gpiod_set_value(chip->ldac_pin, 1);
 	}
 
 	return len;
@@ -2104,6 +2104,7 @@ int adt7316_probe(struct device *dev, struct adt7316_bus *bus,
 	struct adt7316_chip_info *chip;
 	struct iio_dev *indio_dev;
 	unsigned short *adt7316_platform_data = dev->platform_data;
+	int irq_type = IRQF_TRIGGER_LOW;
 	int ret = 0;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*chip));
@@ -2122,7 +2123,13 @@ int adt7316_probe(struct device *dev, struct adt7316_bus *bus,
 	else
 		return -ENODEV;
 
-	chip->ldac_pin = adt7316_platform_data[1];
+	chip->ldac_pin = devm_gpiod_get_optional(dev, "adi,ldac", GPIOD_OUT_LOW);
+	if (IS_ERR(chip->ldac_pin)) {
+		ret = PTR_ERR(chip->ldac_pin);
+		dev_err(dev, "Failed to request ldac GPIO: %d\n", ret);
+		return ret;
+	}
+
 	if (chip->ldac_pin) {
 		chip->config3 |= ADT7316_DA_EN_VIA_DAC_LDCA;
 		if ((chip->id & ID_FAMILY_MASK) == ID_ADT75XX)
@@ -2142,19 +2149,18 @@ int adt7316_probe(struct device *dev, struct adt7316_bus *bus,
 
 	if (chip->bus.irq > 0) {
 		if (adt7316_platform_data[0])
-			chip->bus.irq_flags = adt7316_platform_data[0];
+			irq_type = adt7316_platform_data[0];
 
 		ret = devm_request_threaded_irq(dev, chip->bus.irq,
 						NULL,
 						adt7316_event_handler,
-						chip->bus.irq_flags |
-						IRQF_ONESHOT,
+						irq_type | IRQF_ONESHOT,
 						indio_dev->name,
 						indio_dev);
 		if (ret)
 			return ret;
 
-		if (chip->bus.irq_flags & IRQF_TRIGGER_HIGH)
+		if (irq_type & IRQF_TRIGGER_HIGH)
 			chip->config1 |= ADT7316_INT_POLARITY;
 	}
 

drivers/staging/iio/addac/adt7316.h

@@ -17,7 +17,6 @@
 struct adt7316_bus {
 	void *client;
 	int irq;
-	int irq_flags;
 	int (*read)(void *client, u8 reg, u8 *data);
 	int (*write)(void *client, u8 reg, u8 val);
 	int (*multi_read)(void *client, u8 first_reg, u8 count, u8 *data);

drivers/staging/iio/impedance-analyzer/ad5933.c

@@ -786,9 +786,18 @@ static const struct i2c_device_id ad5933_id[] = {
 
 MODULE_DEVICE_TABLE(i2c, ad5933_id);
 
+static const struct of_device_id ad5933_of_match[] = {
+	{ .compatible = "adi,ad5933" },
+	{ .compatible = "adi,ad5934" },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, ad5933_of_match);
+
 static struct i2c_driver ad5933_driver = {
 	.driver = {
 		.name = "ad5933",
+		.of_match_table = ad5933_of_match,
 	},
 	.probe = ad5933_probe,
 	.remove = ad5933_remove,

drivers/staging/iio/resolver/Kconfig

@@ -3,16 +3,6 @@
 #
 menu "Resolver to digital converters"
 
-config AD2S90
-	tristate "Analog Devices ad2s90 driver"
-	depends on SPI
-	help
-	  Say yes here to build support for Analog Devices spi resolver
-	  to digital converters, ad2s90, provides direct access via sysfs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ad2s90.
-
 config AD2S1210
 	tristate "Analog Devices ad2s1210 driver"
 	depends on SPI

drivers/staging/iio/resolver/Makefile

@@ -2,5 +2,4 @@
 # Makefile for Resolver/Synchro drivers
 #
 
-obj-$(CONFIG_AD2S90) += ad2s90.o
 obj-$(CONFIG_AD2S1210) += ad2s1210.o