Commit c7104c38 authored by Ville Syrjälä's avatar Ville Syrjälä

drm/i915/audio: Introduce a struct for the acomp audio state

Currently we're spreading the stashed state for use of the
audio component hooks all over the place. Start collecting
it up into a single spot.

Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: default avatarKai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-4-ville.syrjala@linux.intel.com
parent 68470541
......@@ -765,27 +765,29 @@ void intel_audio_codec_enable(struct intel_encoder *encoder,
struct drm_i915_private *i915 = to_i915(encoder->base.dev);
struct i915_audio_component *acomp = i915->display.audio.component;
struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
struct drm_connector *connector = conn_state->connector;
struct intel_connector *connector = to_intel_connector(conn_state->connector);
const struct drm_display_mode *adjusted_mode =
&crtc_state->hw.adjusted_mode;
struct intel_audio_state *audio_state;
enum port port = encoder->port;
enum pipe pipe = crtc->pipe;
if (!crtc_state->has_audio)
return;
drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s][ENCODER:%d:%s] Enable audio codec on pipe %c, %u bytes ELD\n",
connector->base.id, connector->name,
drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s][ENCODER:%d:%s] Enable audio codec on [CRTC:%d:%s], %u bytes ELD\n",
connector->base.base.id, connector->base.name,
encoder->base.base.id, encoder->base.name,
pipe_name(pipe), drm_eld_size(connector->eld));
crtc->base.base.id, crtc->base.name,
drm_eld_size(connector->base.eld));
/* FIXME precompute the ELD in .compute_config() */
if (!connector->eld[0])
if (!connector->base.eld[0])
drm_dbg_kms(&i915->drm,
"Bogus ELD on [CONNECTOR:%d:%s]\n",
connector->base.id, connector->name);
connector->base.base.id, connector->base.name);
connector->eld[6] = drm_av_sync_delay(connector, adjusted_mode) / 2;
connector->base.eld[6] = drm_av_sync_delay(&connector->base, adjusted_mode) / 2;
if (i915->display.funcs.audio)
i915->display.funcs.audio->audio_codec_enable(encoder,
......@@ -793,10 +795,12 @@ void intel_audio_codec_enable(struct intel_encoder *encoder,
conn_state);
mutex_lock(&i915->display.audio.mutex);
encoder->audio_connector = connector;
/* referred in audio callbacks */
i915->display.audio.encoder_map[pipe] = encoder;
audio_state = &i915->display.audio.state[pipe];
audio_state->encoder = encoder;
audio_state->connector = connector;
mutex_unlock(&i915->display.audio.mutex);
if (acomp && acomp->base.audio_ops &&
......@@ -808,7 +812,7 @@ void intel_audio_codec_enable(struct intel_encoder *encoder,
(int)port, (int)pipe);
}
intel_lpe_audio_notify(i915, pipe, port, connector->eld,
intel_lpe_audio_notify(i915, pipe, port, connector->base.eld,
crtc_state->port_clock,
intel_crtc_has_dp_encoder(crtc_state));
}
......@@ -829,16 +833,18 @@ void intel_audio_codec_disable(struct intel_encoder *encoder,
struct drm_i915_private *i915 = to_i915(encoder->base.dev);
struct i915_audio_component *acomp = i915->display.audio.component;
struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc);
struct drm_connector *connector = old_conn_state->connector;
struct intel_connector *connector = to_intel_connector(old_conn_state->connector);
struct intel_audio_state *audio_state;
enum port port = encoder->port;
enum pipe pipe = crtc->pipe;
if (!old_crtc_state->has_audio)
return;
drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s][ENCODER:%d:%s] Disable audio codec on pipe %c\n",
connector->base.id, connector->name,
encoder->base.base.id, encoder->base.name, pipe_name(pipe));
drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s][ENCODER:%d:%s] Disable audio codec on [CRTC:%d:%s]\n",
connector->base.base.id, connector->base.name,
encoder->base.base.id, encoder->base.name,
crtc->base.base.id, crtc->base.name);
if (i915->display.funcs.audio)
i915->display.funcs.audio->audio_codec_disable(encoder,
......@@ -846,8 +852,12 @@ void intel_audio_codec_disable(struct intel_encoder *encoder,
old_conn_state);
mutex_lock(&i915->display.audio.mutex);
encoder->audio_connector = NULL;
i915->display.audio.encoder_map[pipe] = NULL;
audio_state = &i915->display.audio.state[pipe];
audio_state->encoder = NULL;
audio_state->connector = NULL;
mutex_unlock(&i915->display.audio.mutex);
if (acomp && acomp->base.audio_ops &&
......@@ -1068,35 +1078,32 @@ static int i915_audio_component_get_cdclk_freq(struct device *kdev)
}
/*
* get the intel_encoder according to the parameter port and pipe
* intel_encoder is saved by the index of pipe
* MST & (pipe >= 0): return the audio.encoder_map[pipe],
* get the intel audio state according to the parameter port and pipe
* MST & (pipe >= 0): return the audio.state[pipe].encoder],
* when port is matched
* MST & (pipe < 0): this is invalid
* Non-MST & (pipe >= 0): only pipe = 0 (the first device entry)
* will get the right intel_encoder with port matched
* Non-MST & (pipe < 0): get the right intel_encoder with port matched
*/
static struct intel_encoder *get_saved_enc(struct drm_i915_private *i915,
int port, int pipe)
static struct intel_audio_state *find_audio_state(struct drm_i915_private *i915,
int port, int pipe)
{
/* MST */
if (pipe >= 0) {
struct intel_audio_state *audio_state;
struct intel_encoder *encoder;
if (drm_WARN_ON(&i915->drm,
pipe >= ARRAY_SIZE(i915->display.audio.encoder_map)))
pipe >= ARRAY_SIZE(i915->display.audio.state)))
return NULL;
encoder = i915->display.audio.encoder_map[pipe];
/*
* when bootup, audio driver may not know it is
* MST or not. So it will poll all the port & pipe
* combinations
*/
audio_state = &i915->display.audio.state[pipe];
encoder = audio_state->encoder;
if (encoder && encoder->port == port &&
encoder->type == INTEL_OUTPUT_DP_MST)
return encoder;
return audio_state;
}
/* Non-MST */
......@@ -1104,13 +1111,15 @@ static struct intel_encoder *get_saved_enc(struct drm_i915_private *i915,
return NULL;
for_each_pipe(i915, pipe) {
struct intel_audio_state *audio_state;
struct intel_encoder *encoder;
encoder = i915->display.audio.encoder_map[pipe];
audio_state = &i915->display.audio.state[pipe];
encoder = audio_state->encoder;
if (encoder && encoder->port == port &&
encoder->type != INTEL_OUTPUT_DP_MST)
return encoder;
return audio_state;
}
return NULL;
......@@ -1121,6 +1130,7 @@ static int i915_audio_component_sync_audio_rate(struct device *kdev, int port,
{
struct drm_i915_private *i915 = kdev_to_i915(kdev);
struct i915_audio_component *acomp = i915->display.audio.component;
const struct intel_audio_state *audio_state;
struct intel_encoder *encoder;
struct intel_crtc *crtc;
unsigned long cookie;
......@@ -1132,20 +1142,22 @@ static int i915_audio_component_sync_audio_rate(struct device *kdev, int port,
cookie = i915_audio_component_get_power(kdev);
mutex_lock(&i915->display.audio.mutex);
/* 1. get the pipe */
encoder = get_saved_enc(i915, port, pipe);
if (!encoder || !encoder->base.crtc) {
drm_dbg_kms(&i915->drm, "Not valid for port %c\n",
port_name(port));
audio_state = find_audio_state(i915, port, pipe);
if (!audio_state) {
drm_dbg_kms(&i915->drm, "Not valid for port %c\n", port_name(port));
err = -ENODEV;
goto unlock;
}
encoder = audio_state->encoder;
/* FIXME stop using the legacy crtc pointer */
crtc = to_intel_crtc(encoder->base.crtc);
/* port must be valid now, otherwise the pipe will be invalid */
acomp->aud_sample_rate[port] = rate;
/* FIXME get rid of the crtc->config stuff */
hsw_audio_config_update(encoder, crtc->config);
unlock:
......@@ -1159,24 +1171,22 @@ static int i915_audio_component_get_eld(struct device *kdev, int port,
unsigned char *buf, int max_bytes)
{
struct drm_i915_private *i915 = kdev_to_i915(kdev);
struct intel_encoder *intel_encoder;
const u8 *eld;
int ret = -EINVAL;
const struct intel_audio_state *audio_state;
int ret = 0;
mutex_lock(&i915->display.audio.mutex);
intel_encoder = get_saved_enc(i915, port, pipe);
if (!intel_encoder) {
drm_dbg_kms(&i915->drm, "Not valid for port %c\n",
port_name(port));
audio_state = find_audio_state(i915, port, pipe);
if (!audio_state) {
drm_dbg_kms(&i915->drm, "Not valid for port %c\n", port_name(port));
mutex_unlock(&i915->display.audio.mutex);
return ret;
return -EINVAL;
}
ret = 0;
*enabled = intel_encoder->audio_connector != NULL;
*enabled = audio_state->connector != NULL;
if (*enabled) {
eld = intel_encoder->audio_connector->eld;
const u8 *eld = audio_state->connector->base.eld;
ret = drm_eld_size(eld);
memcpy(buf, eld, min(max_bytes, ret));
}
......
......@@ -87,6 +87,11 @@ struct intel_wm_funcs {
int (*compute_global_watermarks)(struct intel_atomic_state *state);
};
struct intel_audio_state {
struct intel_encoder *encoder;
struct intel_connector *connector;
};
struct intel_audio {
/* hda/i915 audio component */
struct i915_audio_component *component;
......@@ -96,8 +101,8 @@ struct intel_audio {
int power_refcount;
u32 freq_cntrl;
/* Used to save the pipe-to-encoder mapping for audio */
struct intel_encoder *encoder_map[I915_MAX_PIPES];
/* current audio state for the audio component hooks */
struct intel_audio_state state[I915_MAX_PIPES];
/* necessary resource sharing with HDMI LPE audio driver. */
struct {
......
......@@ -262,8 +262,6 @@ struct intel_encoder {
enum hpd_pin hpd_pin;
enum intel_display_power_domain power_domain;
/* for communication with audio component; protected by av_mutex */
const struct drm_connector *audio_connector;
/* VBT information for this encoder (may be NULL for older platforms) */
const struct intel_bios_encoder_data *devdata;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment