net: hns3: add some required spaces

Add some required spaces to improve readability.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/hisilicon/hns3/hnae3.h

@@ -65,7 +65,7 @@
 #define HNAE3_UNIC_CLIENT_INITED_B		0x4
 #define HNAE3_ROCE_CLIENT_INITED_B		0x5
 
-#define HNAE3_DEV_SUPPORT_ROCE_DCB_BITS (BIT(HNAE3_DEV_SUPPORT_DCB_B) |\
+#define HNAE3_DEV_SUPPORT_ROCE_DCB_BITS (BIT(HNAE3_DEV_SUPPORT_DCB_B) | \
 		BIT(HNAE3_DEV_SUPPORT_ROCE_B))
 
 #define hnae3_dev_roce_supported(hdev) \

drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c

@@ -797,10 +797,10 @@ static const struct hns3_dbg_item tx_bd_info_items[] = {
 	{ "T_CS_VLAN_TSO", 2 },
 	{ "OT_VLAN_TAG", 3 },
 	{ "TV", 2 },
-	{ "OLT_VLAN_LEN", 2},
-	{ "PAYLEN_OL4CS", 2},
-	{ "BD_FE_SC_VLD", 2},
-	{ "MSS_HW_CSUM", 0},
+	{ "OLT_VLAN_LEN", 2 },
+	{ "PAYLEN_OL4CS", 2 },
+	{ "BD_FE_SC_VLD", 2 },
+	{ "MSS_HW_CSUM", 0 },
 };
 
 static void hns3_dump_tx_bd_info(struct hns3_nic_priv *priv,

drivers/net/ethernet/hisilicon/hns3/hns3_enet.c

@@ -63,7 +63,7 @@ MODULE_PARM_DESC(tx_sgl, "Minimum number of frags when using dma_map_sg() to opt
 
 #define HNS3_SGL_SIZE(nfrag)	(sizeof(struct scatterlist) * (nfrag) +	\
 				 sizeof(struct sg_table))
-#define HNS3_MAX_SGL_SIZE	ALIGN(HNS3_SGL_SIZE(HNS3_MAX_TSO_BD_NUM),\
+#define HNS3_MAX_SGL_SIZE	ALIGN(HNS3_SGL_SIZE(HNS3_MAX_TSO_BD_NUM), \
 				      dma_get_cache_alignment())
 
 #define DEFAULT_MSG_LEVEL (NETIF_MSG_PROBE | NETIF_MSG_LINK | \

drivers/net/ethernet/hisilicon/hns3/hns3_enet.h

@@ -392,11 +392,11 @@ enum hns3_pkt_ol4type {
 };
 
 struct hns3_rx_ptype {
-	u32 ptype:8;
-	u32 csum_level:2;
-	u32 ip_summed:2;
-	u32 l3_type:4;
-	u32 valid:1;
+	u32 ptype : 8;
+	u32 csum_level : 2;
+	u32 ip_summed : 2;
+	u32 l3_type : 4;
+	u32 valid : 1;
 };
 
 struct ring_stats {
@@ -522,9 +522,9 @@ struct hns3_enet_coalesce {
 	u16 int_gl;
 	u16 int_ql;
 	u16 int_ql_max;
-	u8 adapt_enable:1;
-	u8 ql_enable:1;
-	u8 unit_1us:1;
+	u8 adapt_enable : 1;
+	u8 ql_enable : 1;
+	u8 unit_1us : 1;
 	enum hns3_flow_level_range flow_level;
 };
 

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c

@@ -375,14 +375,14 @@ static const enum hclge_opcode_type hclge_dfx_reg_opcode_list[] = {
 };
 
 static const struct key_info meta_data_key_info[] = {
-	{ PACKET_TYPE_ID, 6},
-	{ IP_FRAGEMENT, 1},
-	{ ROCE_TYPE, 1},
-	{ NEXT_KEY, 5},
-	{ VLAN_NUMBER, 2},
-	{ SRC_VPORT, 12},
-	{ DST_VPORT, 12},
-	{ TUNNEL_PACKET, 1},
+	{ PACKET_TYPE_ID, 6 },
+	{ IP_FRAGEMENT, 1 },
+	{ ROCE_TYPE, 1 },
+	{ NEXT_KEY, 5 },
+	{ VLAN_NUMBER, 2 },
+	{ SRC_VPORT, 12 },
+	{ DST_VPORT, 12 },
+	{ TUNNEL_PACKET, 1 },
 };
 
 static const struct key_info tuple_key_info[] = {
@@ -749,9 +749,9 @@ static void hclge_update_stats(struct hnae3_handle *handle,
 
 static int hclge_get_sset_count(struct hnae3_handle *handle, int stringset)
 {
-#define HCLGE_LOOPBACK_TEST_FLAGS (HNAE3_SUPPORT_APP_LOOPBACK |\
-		HNAE3_SUPPORT_PHY_LOOPBACK |\
-		HNAE3_SUPPORT_SERDES_SERIAL_LOOPBACK |\
+#define HCLGE_LOOPBACK_TEST_FLAGS (HNAE3_SUPPORT_APP_LOOPBACK | \
+		HNAE3_SUPPORT_PHY_LOOPBACK | \
+		HNAE3_SUPPORT_SERDES_SERIAL_LOOPBACK | \
 		HNAE3_SUPPORT_SERDES_PARALLEL_LOOPBACK)
 
 	struct hclge_vport *vport = hclge_get_vport(handle);