Commit c760558c authored by Hai Li's avatar Hai Li Committed by Rob Clark

dt-bindings: Add MSM DSI controller documentation

Signed-off-by: default avatarHai Li <hali@codeaurora.org>
Signed-off-by: default avatarRob Clark <robdclark@gmail.com>
parent 0c076bff
Qualcomm Technologies Inc. adreno/snapdragon DSI output
Required properties:
- compatible:
* "qcom,mdss-dsi-ctrl"
- reg: Physical base address and length of the registers of controller, PLL,
PHY and PHY regulator
- reg-names: The names of register regions. The following regions are required:
* "dsi_ctrl"
* "dsi_pll"
* "dsi_phy"
* "dsi_phy_regulator"
- qcom,dsi-host-index: The ID of DSI controller hardware instance. This should
be 0 or 1, since we have 2 DSI controllers at most for now.
- interrupts: The interrupt signal from the DSI block.
- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: device clocks
See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
- clock-names: the following clocks are required:
* "bus_clk"
* "byte_clk"
* "core_clk"
* "core_mmss_clk"
* "iface_clk"
* "mdp_core_clk"
* "pixel_clk"
- #clock-cells: The value should be 1.
- vdd-supply: phandle to vdd regulator device node
- vddio-supply: phandle to vdd-io regulator device node
- vdda-supply: phandle to vdda regulator device node
Optional properties:
- panel@0: Node of panel connected to this DSI controller.
See files in Documentation/devicetree/bindings/panel/ for each supported
panel.
- qcom,dual-panel-mode: Boolean value indicating if the DSI controller is
driving a panel which needs 2 DSI links.
- qcom,master-panel: Boolean value indicating if the DSI controller is driving
the master link of the 2-DSI panel.
- qcom,sync-dual-panel: Boolean value indicating if the DSI controller is
driving a 2-DSI panel whose 2 links need receive command simultaneously.
- interrupt-parent: phandle to the MDP block if the interrupt signal is routed
through MDP block
Example:
mdss_dsi0: qcom,mdss_dsi@fd922800 {
compatible = "qcom,mdss-dsi-ctrl";
qcom,dsi-host-index = <0>;
interrupt-parent = <&mdss_mdp>;
interrupts = <4 0>;
reg-names =
"dsi_ctrl",
"dsi_pll",
"dsi_phy",
"dsi_phy_regulator",
reg = <0xfd922800 0x200>,
<0xfd922a00 0xd4>,
<0xfd922b00 0x2b0>,
<0xfd922d80 0x7b>,
<0xfd828000 0x108>;
power-domains = <&mmcc MDSS_GDSC>;
clock-names =
"bus_clk",
"byte_clk",
"core_clk",
"core_mmss_clk",
"iface_clk",
"mdp_core_clk",
"pixel_clk";
clocks =
<&mmcc MDSS_AXI_CLK>,
<&mmcc MDSS_BYTE0_CLK>,
<&mmcc MDSS_ESC0_CLK>,
<&mmcc MMSS_MISC_AHB_CLK>,
<&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_PCLK0_CLK>;
#clock-cells = <1>;
vdda-supply = <&pma8084_l2>;
vdd-supply = <&pma8084_l22>;
vddio-supply = <&pma8084_l12>;
qcom,dual-panel-mode;
qcom,master-panel;
qcom,sync-dual-panel;
panel: panel@0 {
compatible = "sharp,lq101r1sx01";
reg = <0>;
link2 = <&secondary>;
power-supply = <...>;
backlight = <...>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment