Merge tag 'platform-drivers-x86-v4.21-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Andy Shevchenko:

 - The USB Power Delivery discrete components now can be enumerated by
   i2c-multi-instantiate driver via several resources under single ACPI
   device node (ACPI ID is INT3515).

 - Touchscreen support is added for the Mediacom Flexbook Edge 11.

 - Mellanox driver got fixed due to updates in their firmware.

 - The power management stub driver for AtomISP v2 is fixed in order to
   support Intel Baytrail SoCs where same quirk is needed for S0ix to
   work.

 - Special key handling has been fixed for Favorites hotkey on Thinkpad,
   and Screen LOCK on ASUS.

 - Ideapad Yoga 2 13 has no HW rfkill switch, thus, driver has been
   updated to support this.

 - Few cleanups related to debugfs have been made in Intel IPS and Intel
   PMC drivers. Besides that Intel PMC has been extended to show more
   detailed information about Latency Tolerance

* tag 'platform-drivers-x86-v4.21-1' of git://git.infradead.org/linux-platform-drivers-x86: (41 commits)
  platform/x86: mlx-platform: Convert to use SPDX identifier
  Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
  platform/x86: mlx-platform: Allow mlxreg-io driver activation for new systems
  platform/x86: mlx-platform: Fix LED configuration
  platform/x86: mlx-platform: Fix tachometer registers
  platform/x86: mlx-platform: Rename new systems product names
  platform/x86: mlx-platform: Add definitions for new registers
  platform/x86: intel_telemetry: convert to DEFINE_SHOW_ATTRIBUTE
  platform/x86: intel_pmc_core: convert to DEFINE_SHOW_ATTRIBUTE
  platform/x86: thinkpad_acpi: Cleanup quirks macros
  platform/x86: touchscreen_dmi: Add info for the Mediacom Flexbook Edge 11
  platform/x86: Fix config space access for intel_atomisp2_pm
  platform/x86: Add the VLV ISP PCI ID to atomisp2_pm
  platform/x86: intel_ips: Convert to use DEFINE_SHOW_ATTRIBUTE macro
  platform/x86: intel_ips: Remove never happen condition
  platform/x86: intel_ips: NULL check before some freeing functions is not needed
  platform/x86: intel_ips: remove unnecessary checks in ips_debugfs_init
  iio: inv_mpu6050: Use i2c_acpi_get_i2c_resource() helper
  ACPI / scan: Create platform device for INT3515 ACPI nodes
  platform/x86: i2c-multi-instantiate: Allow to have same slaves
  ...

Documentation/ABI/stable/sysfs-driver-mlxreg-io

@@ -12,7 +12,6 @@ Description:	This file shows ASIC health status. The possible values are:
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
 							cpld1_version
 							cpld2_version
-
 Date:		June 2018
 KernelVersion:	4.19
 Contact:	Vadim Pasternak <vadimpmellanox.com>
@@ -21,6 +20,28 @@ Description:	These files show with which CPLD versions have been burned
 
 		The files are read only.
 
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
+							cpld3_version
+
+Date:		November 2018
+KernelVersion:	4.21
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show with which CPLD versions have been burned
+		on LED board.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
+							jtag_enable
+
+Date:		November 2018
+KernelVersion:	4.21
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files enable and disable the access to the JTAG domain.
+		By default access to the JTAG domain is disabled.
+
+		The file is read/write.
+
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio
 Date:		June 2018
 KernelVersion:	4.19
@@ -76,3 +97,21 @@ Description:	These files show the system reset cause, as following: power
 		reset cause.
 
 		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
+						reset_comex_pwr_fail
+						reset_from_comex
+						reset_system
+						reset_voltmon_upgrade_fail
+
+Date:		November 2018
+KernelVersion:	4.21
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show the system reset cause, as following: ComEx
+		power fail, reset from ComEx, system platform reset, reset
+		due to voltage monitor devices upgrade failure,
+		Value 1 in file means this is reset cause, 0 - otherwise.
+		Only one bit could be 1 at the same time, representing only
+		the last reset cause.
+
+		The files are read only.

drivers/acpi/scan.c

@@ -1541,6 +1541,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
 	static const struct acpi_device_id i2c_multi_instantiate_ids[] = {
 		{"BSG1160", },
 		{"INT33FE", },
+		{"INT3515", },
 		{}
 	};
 

drivers/i2c/i2c-core-acpi.c

@@ -45,6 +45,33 @@ struct i2c_acpi_lookup {
 	u32 min_speed;
 };
 
+/**
+ * i2c_acpi_get_i2c_resource - Gets I2cSerialBus resource if type matches
+ * @ares:	ACPI resource
+ * @i2c:	Pointer to I2cSerialBus resource will be returned here
+ *
+ * Checks if the given ACPI resource is of type I2cSerialBus.
+ * In this case, returns a pointer to it to the caller.
+ *
+ * Returns true if resource type is of I2cSerialBus, otherwise false.
+ */
+bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares,
+			       struct acpi_resource_i2c_serialbus **i2c)
+{
+	struct acpi_resource_i2c_serialbus *sb;
+
+	if (ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
+		return false;
+
+	sb = &ares->data.i2c_serial_bus;
+	if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C)
+		return false;
+
+	*i2c = sb;
+	return true;
+}
+EXPORT_SYMBOL_GPL(i2c_acpi_get_i2c_resource);
+
 static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data)
 {
 	struct i2c_acpi_lookup *lookup = data;
@@ -52,11 +79,7 @@ static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data)
 	struct acpi_resource_i2c_serialbus *sb;
 	acpi_status status;
 
-	if (info->addr || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
-		return 1;
-
-	sb = &ares->data.i2c_serial_bus;
-	if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C)
+	if (info->addr || !i2c_acpi_get_i2c_resource(ares, &sb))
 		return 1;
 
 	if (lookup->index != -1 && lookup->n++ != lookup->index)
@@ -65,7 +88,7 @@ static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data)
 	status = acpi_get_handle(lookup->device_handle,
 				 sb->resource_source.string_ptr,
 				 &lookup->adapter_handle);
-	if (!ACPI_SUCCESS(status))
+	if (ACPI_FAILURE(status))
 		return 1;
 
 	info->addr = sb->slave_address;
@@ -386,20 +409,22 @@ struct notifier_block i2c_acpi_notifier = {
  *
  * Also see i2c_new_device, which this function calls to create the i2c-client.
  *
- * Returns a pointer to the new i2c-client, or NULL if the adapter is not found.
+ * Returns a pointer to the new i2c-client, or error pointer in case of failure.
+ * Specifically, -EPROBE_DEFER is returned if the adapter is not found.
  */
 struct i2c_client *i2c_acpi_new_device(struct device *dev, int index,
 				       struct i2c_board_info *info)
 {
 	struct i2c_acpi_lookup lookup;
 	struct i2c_adapter *adapter;
+	struct i2c_client *client;
 	struct acpi_device *adev;
 	LIST_HEAD(resource_list);
 	int ret;
 
 	adev = ACPI_COMPANION(dev);
 	if (!adev)
-		return NULL;
+		return ERR_PTR(-EINVAL);
 
 	memset(&lookup, 0, sizeof(lookup));
 	lookup.info = info;
@@ -408,16 +433,23 @@ struct i2c_client *i2c_acpi_new_device(struct device *dev, int index,
 
 	ret = acpi_dev_get_resources(adev, &resource_list,
 				     i2c_acpi_fill_info, &lookup);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
 	acpi_dev_free_resource_list(&resource_list);
 
-	if (ret < 0 || !info->addr)
-		return NULL;
+	if (!info->addr)
+		return ERR_PTR(-EADDRNOTAVAIL);
 
 	adapter = i2c_acpi_find_adapter_by_handle(lookup.adapter_handle);
 	if (!adapter)
-		return NULL;
+		return ERR_PTR(-EPROBE_DEFER);
+
+	client = i2c_new_device(adapter, info);
+	if (!client)
+		return ERR_PTR(-ENODEV);
 
-	return i2c_new_device(adapter, info);
+	return client;
 }
 EXPORT_SYMBOL_GPL(i2c_acpi_new_device);
 
@@ -525,13 +557,7 @@ i2c_acpi_space_handler(u32 function, acpi_physical_address command,
 		goto err;
 	}
 
-	if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) {
-		ret = AE_BAD_PARAMETER;
-		goto err;
-	}
-
-	sb = &ares->data.i2c_serial_bus;
-	if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+	if (!value64 || !i2c_acpi_get_i2c_resource(ares, &sb)) {
 		ret = AE_BAD_PARAMETER;
 		goto err;
 	}

drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c

@@ -91,18 +91,14 @@ static int asus_acpi_get_sensor_info(struct acpi_device *adev,
 
 static int acpi_i2c_check_resource(struct acpi_resource *ares, void *data)
 {
+	struct acpi_resource_i2c_serialbus *sb;
 	u32 *addr = data;
 
-	if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
-		struct acpi_resource_i2c_serialbus *sb;
-
-		sb = &ares->data.i2c_serial_bus;
-		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) {
-			if (*addr)
-				*addr |= (sb->slave_address << 16);
-			else
-				*addr = sb->slave_address;
-		}
+	if (i2c_acpi_get_i2c_resource(ares, &sb)) {
+		if (*addr)
+			*addr |= (sb->slave_address << 16);
+		else
+			*addr = sb->slave_address;
 	}
 
 	/* Tell the ACPI core that we already copied this address */

drivers/platform/x86/asus-nb-wmi.c

@@ -442,8 +442,7 @@ static const struct key_entry asus_nb_wmi_keymap[] = {
 	{ KE_KEY, 0x30, { KEY_VOLUMEUP } },
 	{ KE_KEY, 0x31, { KEY_VOLUMEDOWN } },
 	{ KE_KEY, 0x32, { KEY_MUTE } },
-	{ KE_KEY, 0x33, { KEY_DISPLAYTOGGLE } }, /* LCD on */
-	{ KE_KEY, 0x34, { KEY_DISPLAY_OFF } }, /* LCD off */
+	{ KE_KEY, 0x35, { KEY_SCREENLOCK } },
 	{ KE_KEY, 0x40, { KEY_PREVIOUSSONG } },
 	{ KE_KEY, 0x41, { KEY_NEXTSONG } },
 	{ KE_KEY, 0x43, { KEY_STOPCD } }, /* Stop/Eject */

drivers/platform/x86/asus-wmi.c

@@ -2131,7 +2131,8 @@ static int asus_wmi_add(struct platform_device *pdev)
 		err = asus_wmi_backlight_init(asus);
 		if (err && err != -ENODEV)
 			goto fail_backlight;
-	}
+	} else
+		err = asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL);
 
 	status = wmi_install_notify_handler(asus->driver->event_guid,
 					    asus_wmi_notify, asus);

drivers/platform/x86/dell-laptop.c

@@ -1565,8 +1565,10 @@ static ssize_t kbd_led_timeout_store(struct device *dev,
 		switch (unit) {
 		case KBD_TIMEOUT_DAYS:
 			value *= 24;
+			/* fall through */
 		case KBD_TIMEOUT_HOURS:
 			value *= 60;
+			/* fall through */
 		case KBD_TIMEOUT_MINUTES:
 			value *= 60;
 			unit = KBD_TIMEOUT_SECONDS;

drivers/platform/x86/i2c-multi-instantiate.c

@@ -7,15 +7,23 @@
  */
 
 #include <linux/acpi.h>
+#include <linux/bits.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/types.h>
+
+#define IRQ_RESOURCE_TYPE	GENMASK(1, 0)
+#define IRQ_RESOURCE_NONE	0
+#define IRQ_RESOURCE_GPIO	1
+#define IRQ_RESOURCE_APIC	2
 
 struct i2c_inst_data {
 	const char *type;
-	int gpio_irq_idx;
+	unsigned int flags;
+	int irq_idx;
 };
 
 struct i2c_multi_inst_data {
@@ -23,6 +31,31 @@ struct i2c_multi_inst_data {
 	struct i2c_client *clients[0];
 };
 
+static int i2c_multi_inst_count(struct acpi_resource *ares, void *data)
+{
+	struct acpi_resource_i2c_serialbus *sb;
+	int *count = data;
+
+	if (i2c_acpi_get_i2c_resource(ares, &sb))
+		*count = *count + 1;
+
+	return 1;
+}
+
+static int i2c_multi_inst_count_resources(struct acpi_device *adev)
+{
+	LIST_HEAD(r);
+	int count = 0;
+	int ret;
+
+	ret = acpi_dev_get_resources(adev, &r, i2c_multi_inst_count, &count);
+	if (ret < 0)
+		return ret;
+
+	acpi_dev_free_resource_list(&r);
+	return count;
+}
+
 static int i2c_multi_inst_probe(struct platform_device *pdev)
 {
 	struct i2c_multi_inst_data *multi;
@@ -44,40 +77,59 @@ static int i2c_multi_inst_probe(struct platform_device *pdev)
 	adev = ACPI_COMPANION(dev);
 
 	/* Count number of clients to instantiate */
-	for (i = 0; inst_data[i].type; i++) {}
+	ret = i2c_multi_inst_count_resources(adev);
+	if (ret < 0)
+		return ret;
 
 	multi = devm_kmalloc(dev,
-			offsetof(struct i2c_multi_inst_data, clients[i]),
+			offsetof(struct i2c_multi_inst_data, clients[ret]),
 			GFP_KERNEL);
 	if (!multi)
 		return -ENOMEM;
 
-	multi->num_clients = i;
+	multi->num_clients = ret;
 
-	for (i = 0; i < multi->num_clients; i++) {
+	for (i = 0; i < multi->num_clients && inst_data[i].type; i++) {
 		memset(&board_info, 0, sizeof(board_info));
 		strlcpy(board_info.type, inst_data[i].type, I2C_NAME_SIZE);
-		snprintf(name, sizeof(name), "%s-%s", match->id,
-			 inst_data[i].type);
+		snprintf(name, sizeof(name), "%s-%s.%d", match->id,
+			 inst_data[i].type, i);
 		board_info.dev_name = name;
-		board_info.irq = 0;
-		if (inst_data[i].gpio_irq_idx != -1) {
-			ret = acpi_dev_gpio_irq_get(adev,
-						    inst_data[i].gpio_irq_idx);
+		switch (inst_data[i].flags & IRQ_RESOURCE_TYPE) {
+		case IRQ_RESOURCE_GPIO:
+			ret = acpi_dev_gpio_irq_get(adev, inst_data[i].irq_idx);
 			if (ret < 0) {
 				dev_err(dev, "Error requesting irq at index %d: %d\n",
-					inst_data[i].gpio_irq_idx, ret);
+					inst_data[i].irq_idx, ret);
 				goto error;
 			}
 			board_info.irq = ret;
+			break;
+		case IRQ_RESOURCE_APIC:
+			ret = platform_get_irq(pdev, inst_data[i].irq_idx);
+			if (ret < 0) {
+				dev_dbg(dev, "Error requesting irq at index %d: %d\n",
+					inst_data[i].irq_idx, ret);
+			}
+			board_info.irq = ret;
+			break;
+		default:
+			board_info.irq = 0;
+			break;
 		}
 		multi->clients[i] = i2c_acpi_new_device(dev, i, &board_info);
-		if (!multi->clients[i]) {
-			dev_err(dev, "Error creating i2c-client, idx %d\n", i);
-			ret = -ENODEV;
+		if (IS_ERR(multi->clients[i])) {
+			ret = PTR_ERR(multi->clients[i]);
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "Error creating i2c-client, idx %d\n", i);
 			goto error;
 		}
 	}
+	if (i < multi->num_clients) {
+		dev_err(dev, "Error finding driver, idx %d\n", i);
+		ret = -ENODEV;
+		goto error;
+	}
 
 	platform_set_drvdata(pdev, multi);
 	return 0;
@@ -101,9 +153,17 @@ static int i2c_multi_inst_remove(struct platform_device *pdev)
 }
 
 static const struct i2c_inst_data bsg1160_data[]  = {
-	{ "bmc150_accel", 0 },
-	{ "bmc150_magn", -1 },
-	{ "bmg160", -1 },
+	{ "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
+	{ "bmc150_magn" },
+	{ "bmg160" },
+	{}
+};
+
+static const struct i2c_inst_data int3515_data[]  = {
+	{ "tps6598x", IRQ_RESOURCE_APIC, 0 },
+	{ "tps6598x", IRQ_RESOURCE_APIC, 1 },
+	{ "tps6598x", IRQ_RESOURCE_APIC, 2 },
+	{ "tps6598x", IRQ_RESOURCE_APIC, 3 },
 	{}
 };
 
@@ -113,6 +173,7 @@ static const struct i2c_inst_data bsg1160_data[]  = {
  */
 static const struct acpi_device_id i2c_multi_inst_acpi_ids[] = {
 	{ "BSG1160", (unsigned long)bsg1160_data },
+	{ "INT3515", (unsigned long)int3515_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, i2c_multi_inst_acpi_ids);

drivers/platform/x86/ideapad-laptop.c

@@ -1188,6 +1188,13 @@ static const struct dmi_system_id no_hw_rfkill_list[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "Yoga2"),
 		},
 	},
+	{
+		.ident = "Lenovo Yoga 2 13",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "Yoga 2 13"),
+		},
+	},
 	{
 		.ident = "Lenovo Yoga 3 1170 / 1470",
 		.matches = {

drivers/platform/x86/intel_atomisp2_pm.c

@@ -33,46 +33,45 @@
 #define ISPSSPM0_IUNIT_POWER_ON		0x0
 #define ISPSSPM0_IUNIT_POWER_OFF	0x3
 
-static int isp_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int isp_set_power(struct pci_dev *dev, bool enable)
 {
 	unsigned long timeout;
-	u32 val;
-
-	pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, 0);
-
-	/*
-	 * MRFLD IUNIT DPHY is located in an always-power-on island
-	 * MRFLD HW design need all CSI ports are disabled before
-	 * powering down the IUNIT.
-	 */
-	pci_read_config_dword(dev, PCI_CSI_CONTROL, &val);
-	val |= PCI_CSI_CONTROL_PORTS_OFF_MASK;
-	pci_write_config_dword(dev, PCI_CSI_CONTROL, val);
+	u32 val = enable ? ISPSSPM0_IUNIT_POWER_ON :
+		ISPSSPM0_IUNIT_POWER_OFF;
 
-	/* Write 0x3 to ISPSSPM0 bit[1:0] to power off the IUNIT */
+	/* Write to ISPSSPM0 bit[1:0] to power on/off the IUNIT */
 	iosf_mbi_modify(BT_MBI_UNIT_PMC, MBI_REG_READ, ISPSSPM0,
-			ISPSSPM0_IUNIT_POWER_OFF, ISPSSPM0_ISPSSC_MASK);
+			val, ISPSSPM0_ISPSSC_MASK);
 
 	/*
 	 * There should be no IUNIT access while power-down is
 	 * in progress HW sighting: 4567865
 	 * Wait up to 50 ms for the IUNIT to shut down.
+	 * And we do the same for power on.
 	 */
 	timeout = jiffies + msecs_to_jiffies(50);
 	while (1) {
-		/* Wait until ISPSSPM0 bit[25:24] shows 0x3 */
-		iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, ISPSSPM0, &val);
-		val = (val & ISPSSPM0_ISPSSS_MASK) >> ISPSSPM0_ISPSSS_OFFSET;
-		if (val == ISPSSPM0_IUNIT_POWER_OFF)
+		u32 tmp;
+
+		/* Wait until ISPSSPM0 bit[25:24] shows the right value */
+		iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, ISPSSPM0, &tmp);
+		tmp = (tmp & ISPSSPM0_ISPSSS_MASK) >> ISPSSPM0_ISPSSS_OFFSET;
+		if (tmp == val)
 			break;
 
 		if (time_after(jiffies, timeout)) {
-			dev_err(&dev->dev, "IUNIT power-off timeout.\n");
+			dev_err(&dev->dev, "IUNIT power-%s timeout.\n",
+				enable ? "on" : "off");
 			return -EBUSY;
 		}
 		usleep_range(1000, 2000);
 	}
 
+	return 0;
+}
+
+static int isp_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
 	pm_runtime_allow(&dev->dev);
 	pm_runtime_put_sync_suspend(&dev->dev);
 
@@ -87,11 +86,40 @@ static void isp_remove(struct pci_dev *dev)
 
 static int isp_pci_suspend(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
+	u32 val;
+
+	pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, 0);
+
+	/*
+	 * MRFLD IUNIT DPHY is located in an always-power-on island
+	 * MRFLD HW design need all CSI ports are disabled before
+	 * powering down the IUNIT.
+	 */
+	pci_read_config_dword(pdev, PCI_CSI_CONTROL, &val);
+	val |= PCI_CSI_CONTROL_PORTS_OFF_MASK;
+	pci_write_config_dword(pdev, PCI_CSI_CONTROL, val);
+
+	/*
+	 * We lose config space access when punit power gates
+	 * the ISP. Can't use pci_set_power_state() because
+	 * pmcsr won't actually change when we write to it.
+	 */
+	pci_save_state(pdev);
+	pdev->current_state = PCI_D3cold;
+	isp_set_power(pdev, false);
+
 	return 0;
 }
 
 static int isp_pci_resume(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	isp_set_power(pdev, true);
+	pdev->current_state = PCI_D0;
+	pci_restore_state(pdev);
+
 	return 0;
 }
 
@@ -99,6 +127,7 @@ static UNIVERSAL_DEV_PM_OPS(isp_pm_ops, isp_pci_suspend,
 			    isp_pci_resume, NULL);
 
 static const struct pci_device_id isp_id_table[] = {
+	{ PCI_VDEVICE(INTEL, 0x0f38), },
 	{ PCI_VDEVICE(INTEL, 0x22b8), },
 	{ 0, }
 };

drivers/platform/x86/intel_cht_int33fe.c

@@ -168,8 +168,8 @@ static int cht_int33fe_probe(struct platform_device *pdev)
 		board_info.dev_name = "max17047";
 		board_info.properties = max17047_props;
 		data->max17047 = i2c_acpi_new_device(dev, 1, &board_info);
-		if (!data->max17047)
-			return -EPROBE_DEFER; /* Wait for i2c-adapter to load */
+		if (IS_ERR(data->max17047))
+			return PTR_ERR(data->max17047);
 	}
 
 	data->connections[0].endpoint[0] = "port0";
@@ -194,16 +194,20 @@ static int cht_int33fe_probe(struct platform_device *pdev)
 	board_info.irq = fusb302_irq;
 
 	data->fusb302 = i2c_acpi_new_device(dev, 2, &board_info);
-	if (!data->fusb302)
+	if (IS_ERR(data->fusb302)) {
+		ret = PTR_ERR(data->fusb302);
 		goto out_unregister_max17047;
+	}
 
 	memset(&board_info, 0, sizeof(board_info));
 	board_info.dev_name = "pi3usb30532";
 	strlcpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE);
 
 	data->pi3usb30532 = i2c_acpi_new_device(dev, 3, &board_info);
-	if (!data->pi3usb30532)
+	if (IS_ERR(data->pi3usb30532)) {
+		ret = PTR_ERR(data->pi3usb30532);
 		goto out_unregister_fusb302;
+	}
 
 	platform_set_drvdata(pdev, data);
 
@@ -213,12 +217,11 @@ static int cht_int33fe_probe(struct platform_device *pdev)
 	i2c_unregister_device(data->fusb302);
 
 out_unregister_max17047:
-	if (data->max17047)
-		i2c_unregister_device(data->max17047);
+	i2c_unregister_device(data->max17047);
 
 	device_connections_remove(data->connections);
 
-	return -EPROBE_DEFER; /* Wait for the i2c-adapter to load */
+	return ret;
 }
 
 static int cht_int33fe_remove(struct platform_device *pdev)
@@ -227,8 +230,7 @@ static int cht_int33fe_remove(struct platform_device *pdev)
 
 	i2c_unregister_device(data->pi3usb30532);
 	i2c_unregister_device(data->fusb302);
-	if (data->max17047)
-		i2c_unregister_device(data->max17047);
+	i2c_unregister_device(data->max17047);
 
 	device_connections_remove(data->connections);
 

drivers/platform/x86/intel_ips.c

@@ -1210,13 +1210,7 @@ static void ips_debugfs_cleanup(struct ips_driver *ips) { return; }
 
 /* Expose current state and limits in debugfs if possible */
 
-struct ips_debugfs_node {
-	struct ips_driver *ips;
-	char *name;
-	int (*show)(struct seq_file *m, void *data);
-};
-
-static int show_cpu_temp(struct seq_file *m, void *data)
+static int cpu_temp_show(struct seq_file *m, void *data)
 {
 	struct ips_driver *ips = m->private;
 
@@ -1225,8 +1219,9 @@ static int show_cpu_temp(struct seq_file *m, void *data)
 
 	return 0;
 }
+DEFINE_SHOW_ATTRIBUTE(cpu_temp);
 
-static int show_cpu_power(struct seq_file *m, void *data)
+static int cpu_power_show(struct seq_file *m, void *data)
 {
 	struct ips_driver *ips = m->private;
 
@@ -1234,8 +1229,9 @@ static int show_cpu_power(struct seq_file *m, void *data)
 
 	return 0;
 }
+DEFINE_SHOW_ATTRIBUTE(cpu_power);
 
-static int show_cpu_clamp(struct seq_file *m, void *data)
+static int cpu_clamp_show(struct seq_file *m, void *data)
 {
 	u64 turbo_override;
 	int tdp, tdc;
@@ -1255,8 +1251,9 @@ static int show_cpu_clamp(struct seq_file *m, void *data)
 
 	return 0;
 }
+DEFINE_SHOW_ATTRIBUTE(cpu_clamp);
 
-static int show_mch_temp(struct seq_file *m, void *data)
+static int mch_temp_show(struct seq_file *m, void *data)
 {
 	struct ips_driver *ips = m->private;
 
@@ -1265,8 +1262,9 @@ static int show_mch_temp(struct seq_file *m, void *data)
 
 	return 0;
 }
+DEFINE_SHOW_ATTRIBUTE(mch_temp);
 
-static int show_mch_power(struct seq_file *m, void *data)
+static int mch_power_show(struct seq_file *m, void *data)
 {
 	struct ips_driver *ips = m->private;
 
@@ -1274,68 +1272,22 @@ static int show_mch_power(struct seq_file *m, void *data)
 
 	return 0;
 }
-
-static struct ips_debugfs_node ips_debug_files[] = {
-	{ NULL, "cpu_temp", show_cpu_temp },
-	{ NULL, "cpu_power", show_cpu_power },
-	{ NULL, "cpu_clamp", show_cpu_clamp },
-	{ NULL, "mch_temp", show_mch_temp },
-	{ NULL, "mch_power", show_mch_power },
-};
-
-static int ips_debugfs_open(struct inode *inode, struct file *file)
-{
-	struct ips_debugfs_node *node = inode->i_private;
-
-	return single_open(file, node->show, node->ips);
-}
-
-static const struct file_operations ips_debugfs_ops = {
-	.owner = THIS_MODULE,
-	.open = ips_debugfs_open,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(mch_power);
 
 static void ips_debugfs_cleanup(struct ips_driver *ips)
 {
-	if (ips->debug_root)
-		debugfs_remove_recursive(ips->debug_root);
-	return;
+	debugfs_remove_recursive(ips->debug_root);
 }
 
 static void ips_debugfs_init(struct ips_driver *ips)
 {
-	int i;
-
 	ips->debug_root = debugfs_create_dir("ips", NULL);
-	if (!ips->debug_root) {
-		dev_err(ips->dev, "failed to create debugfs entries: %ld\n",
-			PTR_ERR(ips->debug_root));
-		return;
-	}
 
-	for (i = 0; i < ARRAY_SIZE(ips_debug_files); i++) {
-		struct dentry *ent;
-		struct ips_debugfs_node *node = &ips_debug_files[i];
-
-		node->ips = ips;
-		ent = debugfs_create_file(node->name, S_IFREG | S_IRUGO,
-					  ips->debug_root, node,
-					  &ips_debugfs_ops);
-		if (!ent) {
-			dev_err(ips->dev, "failed to create debug file: %ld\n",
-				PTR_ERR(ent));
-			goto err_cleanup;
-		}
-	}
-
-	return;
-
-err_cleanup:
-	ips_debugfs_cleanup(ips);
-	return;
+	debugfs_create_file("cpu_temp", 0444, ips->debug_root, ips, &cpu_temp_fops);
+	debugfs_create_file("cpu_power", 0444, ips->debug_root, ips, &cpu_power_fops);
+	debugfs_create_file("cpu_clamp", 0444, ips->debug_root, ips, &cpu_clamp_fops);
+	debugfs_create_file("mch_temp", 0444, ips->debug_root, ips, &mch_temp_fops);
+	debugfs_create_file("mch_power", 0444, ips->debug_root, ips, &mch_power_fops);
 }
 #endif /* CONFIG_DEBUG_FS */
 
@@ -1646,9 +1598,6 @@ static void ips_remove(struct pci_dev *dev)
 	struct ips_driver *ips = pci_get_drvdata(dev);
 	u64 turbo_override;
 
-	if (!ips)
-		return;
-
 	ips_debugfs_cleanup(ips);
 
 	/* Release i915 driver */

drivers/platform/x86/intel_pmc_core.c

@@ -12,6 +12,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/acpi.h>
+#include <linux/bitfield.h>
 #include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -101,10 +102,35 @@ static const struct pmc_bit_map spt_pfear_map[] = {
 	{},
 };
 
+static const struct pmc_bit_map spt_ltr_show_map[] = {
+	{"SOUTHPORT_A",		SPT_PMC_LTR_SPA},
+	{"SOUTHPORT_B",		SPT_PMC_LTR_SPB},
+	{"SATA",		SPT_PMC_LTR_SATA},
+	{"GIGABIT_ETHERNET",	SPT_PMC_LTR_GBE},
+	{"XHCI",		SPT_PMC_LTR_XHCI},
+	{"ME",			SPT_PMC_LTR_ME},
+	/* EVA is Enterprise Value Add, doesn't really exist on PCH */
+	{"EVA",			SPT_PMC_LTR_EVA},
+	{"SOUTHPORT_C",		SPT_PMC_LTR_SPC},
+	{"HD_AUDIO",		SPT_PMC_LTR_AZ},
+	{"LPSS",		SPT_PMC_LTR_LPSS},
+	{"SOUTHPORT_D",		SPT_PMC_LTR_SPD},
+	{"SOUTHPORT_E",		SPT_PMC_LTR_SPE},
+	{"CAMERA",		SPT_PMC_LTR_CAM},
+	{"ESPI",		SPT_PMC_LTR_ESPI},
+	{"SCC",			SPT_PMC_LTR_SCC},
+	{"ISH",			SPT_PMC_LTR_ISH},
+	/* Below two cannot be used for LTR_IGNORE */
+	{"CURRENT_PLATFORM",	SPT_PMC_LTR_CUR_PLT},
+	{"AGGREGATED_SYSTEM",	SPT_PMC_LTR_CUR_ASLT},
+	{}
+};
+
 static const struct pmc_reg_map spt_reg_map = {
 	.pfear_sts = spt_pfear_map,
 	.mphy_sts = spt_mphy_map,
 	.pll_sts = spt_pll_map,
+	.ltr_show_sts = spt_ltr_show_map,
 	.slp_s0_offset = SPT_PMC_SLP_S0_RES_COUNTER_OFFSET,
 	.ltr_ignore_offset = SPT_PMC_LTR_IGNORE_OFFSET,
 	.regmap_length = SPT_PMC_MMIO_REG_LEN,
@@ -112,6 +138,7 @@ static const struct pmc_reg_map spt_reg_map = {
 	.ppfear_buckets = SPT_PPFEAR_NUM_ENTRIES,
 	.pm_cfg_offset = SPT_PMC_PM_CFG_OFFSET,
 	.pm_read_disable_bit = SPT_PMC_READ_DISABLE_BIT,
+	.ltr_ignore_max = SPT_NUM_IP_IGN_ALLOWED,
 };
 
 /* Cannonlake: PGD PFET Enable Ack Status Register(s) bitmap */
@@ -243,10 +270,38 @@ static const struct pmc_bit_map *cnp_slps0_dbg_maps[] = {
 	NULL,
 };
 
+static const struct pmc_bit_map cnp_ltr_show_map[] = {
+	{"SOUTHPORT_A",		CNP_PMC_LTR_SPA},
+	{"SOUTHPORT_B",		CNP_PMC_LTR_SPB},
+	{"SATA",		CNP_PMC_LTR_SATA},
+	{"GIGABIT_ETHERNET",	CNP_PMC_LTR_GBE},
+	{"XHCI",		CNP_PMC_LTR_XHCI},
+	{"ME",			CNP_PMC_LTR_ME},
+	/* EVA is Enterprise Value Add, doesn't really exist on PCH */
+	{"EVA",			CNP_PMC_LTR_EVA},
+	{"SOUTHPORT_C",		CNP_PMC_LTR_SPC},
+	{"HD_AUDIO",		CNP_PMC_LTR_AZ},
+	{"CNV",			CNP_PMC_LTR_CNV},
+	{"LPSS",		CNP_PMC_LTR_LPSS},
+	{"SOUTHPORT_D",		CNP_PMC_LTR_SPD},
+	{"SOUTHPORT_E",		CNP_PMC_LTR_SPE},
+	{"CAMERA",		CNP_PMC_LTR_CAM},
+	{"ESPI",		CNP_PMC_LTR_ESPI},
+	{"SCC",			CNP_PMC_LTR_SCC},
+	{"ISH",			CNP_PMC_LTR_ISH},
+	{"UFSX2",		CNP_PMC_LTR_UFSX2},
+	{"EMMC",		CNP_PMC_LTR_EMMC},
+	/* Below two cannot be used for LTR_IGNORE */
+	{"CURRENT_PLATFORM",	CNP_PMC_LTR_CUR_PLT},
+	{"AGGREGATED_SYSTEM",	CNP_PMC_LTR_CUR_ASLT},
+	{}
+};
+
 static const struct pmc_reg_map cnp_reg_map = {
 	.pfear_sts = cnp_pfear_map,
 	.slp_s0_offset = CNP_PMC_SLP_S0_RES_COUNTER_OFFSET,
 	.slps0_dbg_maps = cnp_slps0_dbg_maps,
+	.ltr_show_sts = cnp_ltr_show_map,
 	.slps0_dbg_offset = CNP_PMC_SLPS0_DBG_OFFSET,
 	.ltr_ignore_offset = CNP_PMC_LTR_IGNORE_OFFSET,
 	.regmap_length = CNP_PMC_MMIO_REG_LEN,
@@ -254,6 +309,7 @@ static const struct pmc_reg_map cnp_reg_map = {
 	.ppfear_buckets = CNP_PPFEAR_NUM_ENTRIES,
 	.pm_cfg_offset = CNP_PMC_PM_CFG_OFFSET,
 	.pm_read_disable_bit = CNP_PMC_READ_DISABLE_BIT,
+	.ltr_ignore_max = CNP_NUM_IP_IGN_ALLOWED,
 };
 
 static inline u8 pmc_core_reg_read_byte(struct pmc_dev *pmcdev, int offset)
@@ -311,7 +367,7 @@ static void pmc_core_display_map(struct seq_file *s, int index,
 		   pf_map[index].bit_mask & pf_reg ? "Off" : "On");
 }
 
-static int pmc_core_ppfear_sts_show(struct seq_file *s, void *unused)
+static int pmc_core_ppfear_show(struct seq_file *s, void *unused)
 {
 	struct pmc_dev *pmcdev = s->private;
 	const struct pmc_bit_map *map = pmcdev->map->pfear_sts;
@@ -329,18 +385,7 @@ static int pmc_core_ppfear_sts_show(struct seq_file *s, void *unused)
 
 	return 0;
 }
-
-static int pmc_core_ppfear_sts_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, pmc_core_ppfear_sts_show, inode->i_private);
-}
-
-static const struct file_operations pmc_core_ppfear_ops = {
-	.open           = pmc_core_ppfear_sts_open,
-	.read           = seq_read,
-	.llseek         = seq_lseek,
-	.release        = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(pmc_core_ppfear);
 
 /* This function should return link status, 0 means ready */
 static int pmc_core_mtpmc_link_status(void)
@@ -372,7 +417,7 @@ static int pmc_core_send_msg(u32 *addr_xram)
 	return 0;
 }
 
-static int pmc_core_mphy_pg_sts_show(struct seq_file *s, void *unused)
+static int pmc_core_mphy_pg_show(struct seq_file *s, void *unused)
 {
 	struct pmc_dev *pmcdev = s->private;
 	const struct pmc_bit_map *map = pmcdev->map->mphy_sts;
@@ -424,18 +469,7 @@ static int pmc_core_mphy_pg_sts_show(struct seq_file *s, void *unused)
 	mutex_unlock(&pmcdev->lock);
 	return err;
 }
-
-static int pmc_core_mphy_pg_sts_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, pmc_core_mphy_pg_sts_show, inode->i_private);
-}
-
-static const struct file_operations pmc_core_mphy_pg_ops = {
-	.open           = pmc_core_mphy_pg_sts_open,
-	.read           = seq_read,
-	.llseek         = seq_lseek,
-	.release        = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(pmc_core_mphy_pg);
 
 static int pmc_core_pll_show(struct seq_file *s, void *unused)
 {
@@ -471,18 +505,7 @@ static int pmc_core_pll_show(struct seq_file *s, void *unused)
 	mutex_unlock(&pmcdev->lock);
 	return err;
 }
-
-static int pmc_core_pll_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, pmc_core_pll_show, inode->i_private);
-}
-
-static const struct file_operations pmc_core_pll_ops = {
-	.open           = pmc_core_pll_open,
-	.read           = seq_read,
-	.llseek         = seq_lseek,
-	.release        = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(pmc_core_pll);
 
 static ssize_t pmc_core_ltr_ignore_write(struct file *file, const char __user
 *userbuf, size_t count, loff_t *ppos)
@@ -500,7 +523,7 @@ static ssize_t pmc_core_ltr_ignore_write(struct file *file, const char __user
 		goto out_unlock;
 	}
 
-	if (val > NUM_IP_IGN_ALLOWED) {
+	if (val > map->ltr_ignore_max) {
 		err = -EINVAL;
 		goto out_unlock;
 	}
@@ -583,6 +606,77 @@ static int pmc_core_slps0_dbg_show(struct seq_file *s, void *unused)
 }
 DEFINE_SHOW_ATTRIBUTE(pmc_core_slps0_dbg);
 
+static u32 convert_ltr_scale(u32 val)
+{
+	/*
+	 * As per PCIE specification supporting document
+	 * ECN_LatencyTolnReporting_14Aug08.pdf the Latency
+	 * Tolerance Reporting data payload is encoded in a
+	 * 3 bit scale and 10 bit value fields. Values are
+	 * multiplied by the indicated scale to yield an absolute time
+	 * value, expressible in a range from 1 nanosecond to
+	 * 2^25*(2^10-1) = 34,326,183,936 nanoseconds.
+	 *
+	 * scale encoding is as follows:
+	 *
+	 * ----------------------------------------------
+	 * |scale factor	|	Multiplier (ns)	|
+	 * ----------------------------------------------
+	 * |	0		|	1		|
+	 * |	1		|	32		|
+	 * |	2		|	1024		|
+	 * |	3		|	32768		|
+	 * |	4		|	1048576		|
+	 * |	5		|	33554432	|
+	 * |	6		|	Invalid		|
+	 * |	7		|	Invalid		|
+	 * ----------------------------------------------
+	 */
+	if (val > 5) {
+		pr_warn("Invalid LTR scale factor.\n");
+		return 0;
+	}
+
+	return 1U << (5 * val);
+}
+
+static int pmc_core_ltr_show(struct seq_file *s, void *unused)
+{
+	struct pmc_dev *pmcdev = s->private;
+	const struct pmc_bit_map *map = pmcdev->map->ltr_show_sts;
+	u64 decoded_snoop_ltr, decoded_non_snoop_ltr;
+	u32 ltr_raw_data, scale, val;
+	u16 snoop_ltr, nonsnoop_ltr;
+	int index;
+
+	for (index = 0; map[index].name ; index++) {
+		decoded_snoop_ltr = decoded_non_snoop_ltr = 0;
+		ltr_raw_data = pmc_core_reg_read(pmcdev,
+						 map[index].bit_mask);
+		snoop_ltr = ltr_raw_data & ~MTPMC_MASK;
+		nonsnoop_ltr = (ltr_raw_data >> 0x10) & ~MTPMC_MASK;
+
+		if (FIELD_GET(LTR_REQ_NONSNOOP, ltr_raw_data)) {
+			scale = FIELD_GET(LTR_DECODED_SCALE, nonsnoop_ltr);
+			val = FIELD_GET(LTR_DECODED_VAL, nonsnoop_ltr);
+			decoded_non_snoop_ltr = val * convert_ltr_scale(scale);
+		}
+
+		if (FIELD_GET(LTR_REQ_SNOOP, ltr_raw_data)) {
+			scale = FIELD_GET(LTR_DECODED_SCALE, snoop_ltr);
+			val = FIELD_GET(LTR_DECODED_VAL, snoop_ltr);
+			decoded_snoop_ltr = val * convert_ltr_scale(scale);
+		}
+
+		seq_printf(s, "%-32s\tLTR: RAW: 0x%-16x\tNon-Snoop(ns): %-16llu\tSnoop(ns): %-16llu\n",
+			   map[index].name, ltr_raw_data,
+			   decoded_non_snoop_ltr,
+			   decoded_snoop_ltr);
+	}
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(pmc_core_ltr);
+
 static void pmc_core_dbgfs_unregister(struct pmc_dev *pmcdev)
 {
 	debugfs_remove_recursive(pmcdev->dbgfs_dir);
@@ -602,19 +696,21 @@ static int pmc_core_dbgfs_register(struct pmc_dev *pmcdev)
 			    &pmc_core_dev_state);
 
 	debugfs_create_file("pch_ip_power_gating_status", 0444, dir, pmcdev,
-			    &pmc_core_ppfear_ops);
+			    &pmc_core_ppfear_fops);
 
 	debugfs_create_file("ltr_ignore", 0644, dir, pmcdev,
 			    &pmc_core_ltr_ignore_ops);
 
+	debugfs_create_file("ltr_show", 0644, dir, pmcdev, &pmc_core_ltr_fops);
+
 	if (pmcdev->map->pll_sts)
 		debugfs_create_file("pll_status", 0444, dir, pmcdev,
-				    &pmc_core_pll_ops);
+				    &pmc_core_pll_fops);
 
 	if (pmcdev->map->mphy_sts)
 		debugfs_create_file("mphy_core_lanes_power_gating_status",
 				    0444, dir, pmcdev,
-				    &pmc_core_mphy_pg_ops);
+				    &pmc_core_mphy_pg_fops);
 
 	if (pmcdev->map->slps0_dbg_maps) {
 		debugfs_create_file("slp_s0_debug_status", 0444,

drivers/platform/x86/intel_pmc_core.h

@@ -12,6 +12,8 @@
 #ifndef PMC_CORE_H
 #define PMC_CORE_H
 
+#include <linux/bits.h>
+
 #define PMC_BASE_ADDR_DEFAULT			0xFE000000
 
 /* Sunrise Point Power Management Controller PCI Device ID */
@@ -35,7 +37,26 @@
 #define SPT_PMC_READ_DISABLE_BIT		0x16
 #define SPT_PMC_MSG_FULL_STS_BIT		0x18
 #define NUM_RETRIES				100
-#define NUM_IP_IGN_ALLOWED			17
+#define SPT_NUM_IP_IGN_ALLOWED			17
+
+#define SPT_PMC_LTR_CUR_PLT			0x350
+#define SPT_PMC_LTR_CUR_ASLT			0x354
+#define SPT_PMC_LTR_SPA				0x360
+#define SPT_PMC_LTR_SPB				0x364
+#define SPT_PMC_LTR_SATA			0x368
+#define SPT_PMC_LTR_GBE				0x36C
+#define SPT_PMC_LTR_XHCI			0x370
+#define SPT_PMC_LTR_ME				0x378
+#define SPT_PMC_LTR_EVA				0x37C
+#define SPT_PMC_LTR_SPC				0x380
+#define SPT_PMC_LTR_AZ				0x384
+#define SPT_PMC_LTR_LPSS			0x38C
+#define SPT_PMC_LTR_CAM				0x390
+#define SPT_PMC_LTR_SPD				0x394
+#define SPT_PMC_LTR_SPE				0x398
+#define SPT_PMC_LTR_ESPI			0x39C
+#define SPT_PMC_LTR_SCC				0x3A0
+#define SPT_PMC_LTR_ISH				0x3A4
 
 /* Sunrise Point: PGD PFET Enable Ack Status Registers */
 enum ppfear_regs {
@@ -115,18 +136,46 @@ enum ppfear_regs {
 #define SPT_PMC_BIT_MPHY_CMN_LANE3		BIT(3)
 
 /* Cannonlake Power Management Controller register offsets */
-#define CNP_PMC_SLP_S0_RES_COUNTER_OFFSET      0x193C
-#define CNP_PMC_LTR_IGNORE_OFFSET              0x1B0C
-#define CNP_PMC_PM_CFG_OFFSET                  0x1818
 #define CNP_PMC_SLPS0_DBG_OFFSET		0x10B4
+#define CNP_PMC_PM_CFG_OFFSET			0x1818
+#define CNP_PMC_SLP_S0_RES_COUNTER_OFFSET	0x193C
+#define CNP_PMC_LTR_IGNORE_OFFSET		0x1B0C
 /* Cannonlake: PGD PFET Enable Ack Status Register(s) start */
-#define CNP_PMC_HOST_PPFEAR0A                  0x1D90
+#define CNP_PMC_HOST_PPFEAR0A			0x1D90
 
-#define CNP_PMC_MMIO_REG_LEN                   0x2000
-#define CNP_PPFEAR_NUM_ENTRIES                 8
-#define CNP_PMC_READ_DISABLE_BIT               22
 #define CNP_PMC_LATCH_SLPS0_EVENTS		BIT(31)
 
+#define CNP_PMC_MMIO_REG_LEN			0x2000
+#define CNP_PPFEAR_NUM_ENTRIES			8
+#define CNP_PMC_READ_DISABLE_BIT		22
+#define CNP_NUM_IP_IGN_ALLOWED			19
+#define CNP_PMC_LTR_CUR_PLT			0x1B50
+#define CNP_PMC_LTR_CUR_ASLT			0x1B54
+#define CNP_PMC_LTR_SPA				0x1B60
+#define CNP_PMC_LTR_SPB				0x1B64
+#define CNP_PMC_LTR_SATA			0x1B68
+#define CNP_PMC_LTR_GBE				0x1B6C
+#define CNP_PMC_LTR_XHCI			0x1B70
+#define CNP_PMC_LTR_ME				0x1B78
+#define CNP_PMC_LTR_EVA				0x1B7C
+#define CNP_PMC_LTR_SPC				0x1B80
+#define CNP_PMC_LTR_AZ				0x1B84
+#define CNP_PMC_LTR_LPSS			0x1B8C
+#define CNP_PMC_LTR_CAM				0x1B90
+#define CNP_PMC_LTR_SPD				0x1B94
+#define CNP_PMC_LTR_SPE				0x1B98
+#define CNP_PMC_LTR_ESPI			0x1B9C
+#define CNP_PMC_LTR_SCC				0x1BA0
+#define CNP_PMC_LTR_ISH				0x1BA4
+#define CNP_PMC_LTR_CNV				0x1BF0
+#define CNP_PMC_LTR_EMMC			0x1BF4
+#define CNP_PMC_LTR_UFSX2			0x1BF8
+
+#define LTR_DECODED_VAL				GENMASK(9, 0)
+#define LTR_DECODED_SCALE			GENMASK(12, 10)
+#define LTR_REQ_SNOOP				BIT(15)
+#define LTR_REQ_NONSNOOP			BIT(31)
+
 struct pmc_bit_map {
 	const char *name;
 	u32 bit_mask;
@@ -139,6 +188,7 @@ struct pmc_bit_map {
  * @mphy_sts:		Maps name of MPHY lane to MPHY status lane status bit
  * @pll_sts:		Maps name of PLL to corresponding bit status
  * @slps0_dbg_maps:	Array of SLP_S0_DBG* registers containing debug info
+ * @ltr_show_sts:	Maps PCH IP Names to their MMIO register offsets
  * @slp_s0_offset:	PWRMBASE offset to read SLP_S0 residency
  * @ltr_ignore_offset:	PWRMBASE offset to read/write LTR ignore bit
  * @regmap_length:	Length of memory to map from PWRMBASE address to access
@@ -157,6 +207,7 @@ struct pmc_reg_map {
 	const struct pmc_bit_map *mphy_sts;
 	const struct pmc_bit_map *pll_sts;
 	const struct pmc_bit_map **slps0_dbg_maps;
+	const struct pmc_bit_map *ltr_show_sts;
 	const u32 slp_s0_offset;
 	const u32 ltr_ignore_offset;
 	const int regmap_length;
@@ -165,6 +216,7 @@ struct pmc_reg_map {
 	const u32 pm_cfg_offset;
 	const int pm_read_disable_bit;
 	const u32 slps0_dbg_offset;
+	const u32 ltr_ignore_max;
 };
 
 /**

drivers/platform/x86/intel_telemetry_debugfs.c

@@ -466,17 +466,7 @@ static int telem_pss_states_show(struct seq_file *s, void *unused)
 	return 0;
 }
 
-static int telem_pss_state_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, telem_pss_states_show, inode->i_private);
-}
-
-static const struct file_operations telem_pss_ops = {
-	.open		= telem_pss_state_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(telem_pss_states);
 
 static int telem_ioss_states_show(struct seq_file *s, void *unused)
 {
@@ -505,17 +495,7 @@ static int telem_ioss_states_show(struct seq_file *s, void *unused)
 	return 0;
 }
 
-static int telem_ioss_state_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, telem_ioss_states_show, inode->i_private);
-}
-
-static const struct file_operations telem_ioss_ops = {
-	.open		= telem_ioss_state_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(telem_ioss_states);
 
 static int telem_soc_states_show(struct seq_file *s, void *unused)
 {
@@ -664,17 +644,7 @@ static int telem_soc_states_show(struct seq_file *s, void *unused)
 	return 0;
 }
 
-static int telem_soc_state_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, telem_soc_states_show, inode->i_private);
-}
-
-static const struct file_operations telem_socstate_ops = {
-	.open		= telem_soc_state_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(telem_soc_states);
 
 static int telem_s0ix_res_get(void *data, u64 *val)
 {
@@ -960,7 +930,7 @@ static int __init telemetry_debugfs_init(void)
 
 	f = debugfs_create_file("pss_info", S_IFREG | S_IRUGO,
 				debugfs_conf->telemetry_dbg_dir, NULL,
-				&telem_pss_ops);
+				&telem_pss_states_fops);
 	if (!f) {
 		pr_err("pss_sample_info debugfs register failed\n");
 		goto out;
@@ -968,7 +938,7 @@ static int __init telemetry_debugfs_init(void)
 
 	f = debugfs_create_file("ioss_info", S_IFREG | S_IRUGO,
 				debugfs_conf->telemetry_dbg_dir, NULL,
-				&telem_ioss_ops);
+				&telem_ioss_states_fops);
 	if (!f) {
 		pr_err("ioss_sample_info debugfs register failed\n");
 		goto out;
@@ -976,7 +946,7 @@ static int __init telemetry_debugfs_init(void)
 
 	f = debugfs_create_file("soc_states", S_IFREG | S_IRUGO,
 				debugfs_conf->telemetry_dbg_dir,
-				NULL, &telem_socstate_ops);
+				NULL, &telem_soc_states_fops);
 	if (!f) {
 		pr_err("ioss_sample_info debugfs register failed\n");
 		goto out;

drivers/platform/x86/mlx-platform.c

+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
 /*
- * Copyright (c) 2016 Mellanox Technologies. All rights reserved.
- * Copyright (c) 2016 Vadim Pasternak <vadimp@mellanox.com>
+ * Mellanox platform driver
  *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
+ * Copyright (C) 2016-2018 Mellanox Technologies
+ * Copyright (C) 2016-2018 Vadim Pasternak <vadimp@mellanox.com>
  */
 
 #include <linux/device.h>
@@ -49,7 +24,10 @@
 #define MLXPLAT_CPLD_LPC_REG_BASE_ADRR		0x2500
 #define MLXPLAT_CPLD_LPC_REG_CPLD1_VER_OFFSET	0x00
 #define MLXPLAT_CPLD_LPC_REG_CPLD2_VER_OFFSET	0x01
+#define MLXPLAT_CPLD_LPC_REG_CPLD3_VER_OFFSET	0x02
 #define MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET	0x1d
+#define MLXPLAT_CPLD_LPC_REG_RST_CAUSE1_OFFSET	0x1e
+#define MLXPLAT_CPLD_LPC_REG_RST_CAUSE2_OFFSET	0x1f
 #define MLXPLAT_CPLD_LPC_REG_LED1_OFFSET	0x20
 #define MLXPLAT_CPLD_LPC_REG_LED2_OFFSET	0x21
 #define MLXPLAT_CPLD_LPC_REG_LED3_OFFSET	0x22
@@ -83,12 +61,12 @@
 #define MLXPLAT_CPLD_LPC_REG_TACHO4_OFFSET	0xe7
 #define MLXPLAT_CPLD_LPC_REG_TACHO5_OFFSET	0xe8
 #define MLXPLAT_CPLD_LPC_REG_TACHO6_OFFSET	0xe9
-#define MLXPLAT_CPLD_LPC_REG_TACHO7_OFFSET	0xea
-#define MLXPLAT_CPLD_LPC_REG_TACHO8_OFFSET	0xeb
-#define MLXPLAT_CPLD_LPC_REG_TACHO9_OFFSET	0xec
-#define MLXPLAT_CPLD_LPC_REG_TACHO10_OFFSET	0xed
-#define MLXPLAT_CPLD_LPC_REG_TACHO11_OFFSET	0xee
-#define MLXPLAT_CPLD_LPC_REG_TACHO12_OFFSET	0xef
+#define MLXPLAT_CPLD_LPC_REG_TACHO7_OFFSET	0xeb
+#define MLXPLAT_CPLD_LPC_REG_TACHO8_OFFSET	0xec
+#define MLXPLAT_CPLD_LPC_REG_TACHO9_OFFSET	0xed
+#define MLXPLAT_CPLD_LPC_REG_TACHO10_OFFSET	0xee
+#define MLXPLAT_CPLD_LPC_REG_TACHO11_OFFSET	0xef
+#define MLXPLAT_CPLD_LPC_REG_TACHO12_OFFSET	0xf0
 #define MLXPLAT_CPLD_LPC_IO_RANGE		0x100
 #define MLXPLAT_CPLD_LPC_I2C_CH1_OFF		0xdb
 #define MLXPLAT_CPLD_LPC_I2C_CH2_OFF		0xda
@@ -1101,6 +1079,118 @@ static struct mlxreg_core_platform_data mlxplat_msn21xx_regs_io_data = {
 		.counter = ARRAY_SIZE(mlxplat_mlxcpld_msn21xx_regs_io_data),
 };
 
+/* Platform register access for next generation systems families data */
+static struct mlxreg_core_data mlxplat_mlxcpld_default_ng_regs_io_data[] = {
+	{
+		.label = "cpld1_version",
+		.reg = MLXPLAT_CPLD_LPC_REG_CPLD1_VER_OFFSET,
+		.bit = GENMASK(7, 0),
+		.mode = 0444,
+	},
+	{
+		.label = "cpld2_version",
+		.reg = MLXPLAT_CPLD_LPC_REG_CPLD2_VER_OFFSET,
+		.bit = GENMASK(7, 0),
+		.mode = 0444,
+	},
+	{
+		.label = "cpld3_version",
+		.reg = MLXPLAT_CPLD_LPC_REG_CPLD3_VER_OFFSET,
+		.bit = GENMASK(7, 0),
+		.mode = 0444,
+	},
+	{
+		.label = "reset_long_pb",
+		.reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET,
+		.mask = GENMASK(7, 0) & ~BIT(0),
+		.mode = 0444,
+	},
+	{
+		.label = "reset_short_pb",
+		.reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET,
+		.mask = GENMASK(7, 0) & ~BIT(1),
+		.mode = 0444,
+	},
+	{
+		.label = "reset_aux_pwr_or_ref",
+		.reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET,
+		.mask = GENMASK(7, 0) & ~BIT(2),
+		.mode = 0444,
+	},
+	{
+		.label = "reset_from_comex",
+		.reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET,
+		.mask = GENMASK(7, 0) & ~BIT(4),
+		.mode = 0444,
+	},
+	{
+		.label = "reset_asic_thermal",
+		.reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET,
+		.mask = GENMASK(7, 0) & ~BIT(7),
+		.mode = 0444,
+	},
+	{
+		.label = "reset_comex_pwr_fail",
+		.reg = MLXPLAT_CPLD_LPC_REG_RST_CAUSE1_OFFSET,
+		.mask = GENMASK(7, 0) & ~BIT(3),
+		.mode = 0444,
+	},
+	{
+		.label = "reset_voltmon_upgrade_fail",
+		.reg = MLXPLAT_CPLD_LPC_REG_RST_CAUSE2_OFFSET,
+		.mask = GENMASK(7, 0) & ~BIT(0),
+		.mode = 0444,
+	},
+	{
+		.label = "reset_system",
+		.reg = MLXPLAT_CPLD_LPC_REG_RST_CAUSE2_OFFSET,
+		.mask = GENMASK(7, 0) & ~BIT(1),
+		.mode = 0444,
+	},
+	{
+		.label = "psu1_on",
+		.reg = MLXPLAT_CPLD_LPC_REG_GP1_OFFSET,
+		.mask = GENMASK(7, 0) & ~BIT(0),
+		.mode = 0200,
+	},
+	{
+		.label = "psu2_on",
+		.reg = MLXPLAT_CPLD_LPC_REG_GP1_OFFSET,
+		.mask = GENMASK(7, 0) & ~BIT(1),
+		.mode = 0200,
+	},
+	{
+		.label = "pwr_cycle",
+		.reg = MLXPLAT_CPLD_LPC_REG_GP1_OFFSET,
+		.mask = GENMASK(7, 0) & ~BIT(2),
+		.mode = 0200,
+	},
+	{
+		.label = "pwr_down",
+		.reg = MLXPLAT_CPLD_LPC_REG_GP1_OFFSET,
+		.mask = GENMASK(7, 0) & ~BIT(3),
+		.mode = 0200,
+	},
+	{
+		.label = "jtag_enable",
+		.reg = MLXPLAT_CPLD_LPC_REG_GP2_OFFSET,
+		.mask = GENMASK(7, 0) & ~BIT(4),
+		.mode = 0644,
+	},
+	{
+		.label = "asic_health",
+		.reg = MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET,
+		.mask = MLXPLAT_CPLD_ASIC_MASK,
+		.bit = 1,
+		.mode = 0444,
+	},
+};
+
+static struct mlxreg_core_platform_data mlxplat_default_ng_regs_io_data = {
+		.data = mlxplat_mlxcpld_default_ng_regs_io_data,
+		.counter = ARRAY_SIZE(mlxplat_mlxcpld_default_ng_regs_io_data),
+};
+
 /* Platform FAN default */
 static struct mlxreg_core_data mlxplat_mlxcpld_default_fan_data[] = {
 	{
@@ -1208,7 +1298,10 @@ static bool mlxplat_mlxcpld_readable_reg(struct device *dev, unsigned int reg)
 	switch (reg) {
 	case MLXPLAT_CPLD_LPC_REG_CPLD1_VER_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_CPLD2_VER_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_CPLD3_VER_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_RST_CAUSE1_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_RST_CAUSE2_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_LED1_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_LED2_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_LED3_OFFSET:
@@ -1258,7 +1351,10 @@ static bool mlxplat_mlxcpld_volatile_reg(struct device *dev, unsigned int reg)
 	switch (reg) {
 	case MLXPLAT_CPLD_LPC_REG_CPLD1_VER_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_CPLD2_VER_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_CPLD3_VER_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_RST_CAUSE1_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_RST_CAUSE2_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_LED1_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_LED2_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_LED3_OFFSET:
@@ -1421,7 +1517,7 @@ static int __init mlxplat_dmi_msn201x_matched(const struct dmi_system_id *dmi)
 	mlxplat_hotplug = &mlxplat_mlxcpld_msn201x_data;
 	mlxplat_hotplug->deferred_nr =
 		mlxplat_default_channels[i - 1][MLXPLAT_CPLD_GRP_CHNL_NUM - 1];
-	mlxplat_led = &mlxplat_default_ng_led_data;
+	mlxplat_led = &mlxplat_msn21xx_led_data;
 	mlxplat_regs_io = &mlxplat_msn21xx_regs_io_data;
 
 	return 1;
@@ -1439,7 +1535,8 @@ static int __init mlxplat_dmi_qmb7xx_matched(const struct dmi_system_id *dmi)
 	mlxplat_hotplug = &mlxplat_mlxcpld_default_ng_data;
 	mlxplat_hotplug->deferred_nr =
 		mlxplat_msn21xx_channels[MLXPLAT_CPLD_GRP_CHNL_NUM - 1];
-	mlxplat_led = &mlxplat_msn21xx_led_data;
+	mlxplat_led = &mlxplat_default_ng_led_data;
+	mlxplat_regs_io = &mlxplat_default_ng_regs_io_data;
 	mlxplat_fan = &mlxplat_default_fan_data;
 
 	return 1;
@@ -1499,21 +1596,21 @@ static const struct dmi_system_id mlxplat_dmi_table[] __initconst = {
 		.callback = mlxplat_dmi_qmb7xx_matched,
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "QMB7"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MQM87"),
 		},
 	},
 	{
 		.callback = mlxplat_dmi_qmb7xx_matched,
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "SN37"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MSN37"),
 		},
 	},
 	{
 		.callback = mlxplat_dmi_qmb7xx_matched,
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "SN34"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MSN34"),
 		},
 	},
 	{

drivers/platform/x86/thinkpad_acpi.c

@@ -478,6 +478,12 @@ do {									\
 	  .ec = TPACPI_MATCH_ANY,		\
 	  .quirks = (__quirk) }
 
+#define TPACPI_QEC_IBM(__id1, __id2, __quirk)	\
+	{ .vendor = PCI_VENDOR_ID_IBM,		\
+	  .bios = TPACPI_MATCH_ANY,		\
+	  .ec = TPID(__id1, __id2),		\
+	  .quirks = (__quirk) }
+
 #define TPACPI_QEC_LNV(__id1, __id2, __quirk)	\
 	{ .vendor = PCI_VENDOR_ID_LENOVO,	\
 	  .bios = TPACPI_MATCH_ANY,		\
@@ -3457,7 +3463,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 		KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
 		KEY_UNKNOWN,
 
-		KEY_FAVORITES,       /* Favorite app, 0x311 */
+		KEY_BOOKMARKS,       /* Favorite app, 0x311 */
 		KEY_RESERVED,        /* Clipping tool */
 		KEY_CALC,            /* Calculator (above numpad, P52) */
 		KEY_BLUETOOTH,       /* Bluetooth */
@@ -5973,9 +5979,6 @@ static const struct tpacpi_quirk led_useful_qtable[] __initconst = {
 	},
 };
 
-#undef TPACPI_LEDQ_IBM
-#undef TPACPI_LEDQ_LNV
-
 static enum led_access_mode __init led_init_detect_mode(void)
 {
 	acpi_status status;
@@ -8710,40 +8713,18 @@ static const struct attribute_group fan_attr_group = {
 	.attrs = fan_attributes,
 };
 
-#define	TPACPI_FAN_Q1	0x0001		/* Unitialized HFSP */
+#define TPACPI_FAN_Q1	0x0001		/* Unitialized HFSP */
 #define TPACPI_FAN_2FAN	0x0002		/* EC 0x31 bit 0 selects fan2 */
 
-#define TPACPI_FAN_QI(__id1, __id2, __quirks)	\
-	{ .vendor = PCI_VENDOR_ID_IBM,		\
-	  .bios = TPACPI_MATCH_ANY,		\
-	  .ec = TPID(__id1, __id2),		\
-	  .quirks = __quirks }
-
-#define TPACPI_FAN_QL(__id1, __id2, __quirks)	\
-	{ .vendor = PCI_VENDOR_ID_LENOVO,	\
-	  .bios = TPACPI_MATCH_ANY,		\
-	  .ec = TPID(__id1, __id2),		\
-	  .quirks = __quirks }
-
-#define TPACPI_FAN_QB(__id1, __id2, __quirks)	\
-	{ .vendor = PCI_VENDOR_ID_LENOVO,	\
-	  .bios = TPID(__id1, __id2),		\
-	  .ec = TPACPI_MATCH_ANY,		\
-	  .quirks = __quirks }
-
 static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
-	TPACPI_FAN_QI('1', 'Y', TPACPI_FAN_Q1),
-	TPACPI_FAN_QI('7', '8', TPACPI_FAN_Q1),
-	TPACPI_FAN_QI('7', '6', TPACPI_FAN_Q1),
-	TPACPI_FAN_QI('7', '0', TPACPI_FAN_Q1),
-	TPACPI_FAN_QL('7', 'M', TPACPI_FAN_2FAN),
-	TPACPI_FAN_QB('N', '1', TPACPI_FAN_2FAN),
+	TPACPI_QEC_IBM('1', 'Y', TPACPI_FAN_Q1),
+	TPACPI_QEC_IBM('7', '8', TPACPI_FAN_Q1),
+	TPACPI_QEC_IBM('7', '6', TPACPI_FAN_Q1),
+	TPACPI_QEC_IBM('7', '0', TPACPI_FAN_Q1),
+	TPACPI_QEC_LNV('7', 'M', TPACPI_FAN_2FAN),
+	TPACPI_Q_LNV('N', '1', TPACPI_FAN_2FAN),
 };
 
-#undef TPACPI_FAN_QL
-#undef TPACPI_FAN_QI
-#undef TPACPI_FAN_QB
-
 static int __init fan_init(struct ibm_init_struct *iibm)
 {
 	int rc;

drivers/platform/x86/touchscreen_dmi.c

@@ -614,6 +614,14 @@ static const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_BIOS_VERSION, "jumperx.T87.KFBNEEA"),
 		},
 	},
+	{
+		/* Mediacom Flexbook Edge 11 (same hw as TS Primebook C11) */
+		.driver_data = (void *)&trekstor_primebook_c11_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MEDIACOM"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "FlexBook edge11 - M-FBE11"),
+		},
+	},
 	{
 		/* Onda oBook 20 Plus */
 		.driver_data = (void *)&onda_obook_20_plus_data,

drivers/usb/typec/tps6598x.c

@@ -501,19 +501,19 @@ static int tps6598x_remove(struct i2c_client *client)
 	return 0;
 }
 
-static const struct acpi_device_id tps6598x_acpi_match[] = {
-	{ "INT3515", 0 },
+static const struct i2c_device_id tps6598x_id[] = {
+	{ "tps6598x" },
 	{ }
 };
-MODULE_DEVICE_TABLE(acpi, tps6598x_acpi_match);
+MODULE_DEVICE_TABLE(i2c, tps6598x_id);
 
 static struct i2c_driver tps6598x_i2c_driver = {
 	.driver = {
 		.name = "tps6598x",
-		.acpi_match_table = tps6598x_acpi_match,
 	},
 	.probe_new = tps6598x_probe,
 	.remove = tps6598x_remove,
+	.id_table = tps6598x_id,
 };
 module_i2c_driver(tps6598x_i2c_driver);
 

include/linux/acpi.h

@@ -1054,6 +1054,17 @@ static inline int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
 }
 #endif
 
+#if defined(CONFIG_ACPI) && IS_ENABLED(CONFIG_I2C)
+bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares,
+			       struct acpi_resource_i2c_serialbus **i2c);
+#else
+static inline bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares,
+					     struct acpi_resource_i2c_serialbus **i2c)
+{
+	return false;
+}
+#endif
+
 /* Device properties */
 
 #ifdef CONFIG_ACPI