Commit c7753e90 authored by Dave Airlie's avatar Dave Airlie

Merge branch 'drm-rockchip-next-2016-01-06' of...

Merge branch 'drm-rockchip-next-2016-01-06' of https://github.com/markyzq/kernel-drm-rockchip into drm-next

new rockchip bits.

* 'drm-rockchip-next-2016-01-06' of https://github.com/markyzq/kernel-drm-rockchip:
  drm: rockchip: Support Synopsys DW MIPI DSI
  Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
  drm/rockchip: return a true clock rate to adjusted_mode
parents a50e2bf5 84e05408
Rockchip specific extensions to the Synopsys Designware MIPI DSI
================================
Required properties:
- #address-cells: Should be <1>.
- #size-cells: Should be <0>.
- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
- reg: Represent the physical address range of the controller.
- interrupts: Represent the controller's interrupt to the CPU(s).
- clocks, clock-names: Phandles to the controller's pll reference
clock(ref) and APB clock(pclk), as described in [1].
- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
- ports: contain a port node with endpoint definitions as defined in [2].
For vopb,set the reg = <0> and set the reg = <1> for vopl.
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
mipi_dsi: mipi@ff960000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
reg = <0xff960000 0x4000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
clock-names = "ref", "pclk";
rockchip,grf = <&grf>;
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
mipi_in: port {
#address-cells = <1>;
#size-cells = <0>;
mipi_in_vopb: endpoint@0 {
reg = <0>;
remote-endpoint = <&vopb_out_mipi>;
};
mipi_in_vopl: endpoint@1 {
reg = <1>;
remote-endpoint = <&vopl_out_mipi>;
};
};
};
panel {
compatible ="boe,tv080wum-nl0";
reg = <0>;
enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_en>;
backlight = <&backlight>;
status = "okay";
};
};
......@@ -25,3 +25,13 @@ config ROCKCHIP_DW_HDMI
for the Synopsys DesignWare HDMI driver. If you want to
enable HDMI on RK3288 based SoC, you should selet this
option.
config ROCKCHIP_DW_MIPI_DSI
tristate "Rockchip specific extensions for Synopsys DW MIPI DSI"
depends on DRM_ROCKCHIP
select DRM_MIPI_DSI
help
This selects support for Rockchip SoC specific extensions
for the Synopsys DesignWare HDMI driver. If you want to
enable MIPI DSI on RK3288 based SoC, you should selet this
option.
......@@ -6,6 +6,7 @@ rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o rockchip_drm_fbdev.o \
rockchip_drm_gem.o
obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
obj-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi.o
obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o \
rockchip_vop_reg.o
This diff is collapsed.
......@@ -818,6 +818,9 @@ int rockchip_drm_crtc_mode_config(struct drm_crtc *crtc,
case DRM_MODE_CONNECTOR_HDMIA:
VOP_CTRL_SET(vop, hdmi_en, 1);
break;
case DRM_MODE_CONNECTOR_DSI:
VOP_CTRL_SET(vop, mipi_en, 1);
break;
default:
DRM_ERROR("unsupport connector_type[%d]\n", connector_type);
return -EINVAL;
......@@ -878,9 +881,14 @@ static bool vop_crtc_mode_fixup(struct drm_crtc *crtc,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct vop *vop = to_vop(crtc);
if (adjusted_mode->htotal == 0 || adjusted_mode->vtotal == 0)
return false;
adjusted_mode->clock =
clk_round_rate(vop->dclk, mode->clock * 1000) / 1000;
return true;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment