Commit c781ff12 authored by Vladyslav Tarasiuk's avatar Vladyslav Tarasiuk Committed by David S. Miller

ethtool: Allow network drivers to dump arbitrary EEPROM data

Define get_module_eeprom_by_page() ethtool callback and implement
netlink infrastructure.

get_module_eeprom_by_page() allows network drivers to dump a part of
module's EEPROM specified by page and bank numbers along with offset and
length. It is effectively a netlink replacement for get_module_info()
and get_module_eeprom() pair, which is needed due to emergence of
complex non-linear EEPROM layouts.
Signed-off-by: default avatarVladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent cbd31253
......@@ -1338,6 +1338,38 @@ in an implementation specific way.
``ETHTOOL_A_FEC_AUTO`` requests the driver to choose FEC mode based on SFP
module parameters. This does not mean autonegotiation.
MODULE_EEPROM
=============
Fetch module EEPROM data dump.
This interface is designed to allow dumps of at most 1/2 page at once. This
means only dumps of 128 (or less) bytes are allowed, without crossing half page
boundary located at offset 128. For pages other than 0 only high 128 bytes are
accessible.
Request contents:
======================================= ====== ==========================
``ETHTOOL_A_MODULE_EEPROM_HEADER`` nested request header
``ETHTOOL_A_MODULE_EEPROM_OFFSET`` u32 offset within a page
``ETHTOOL_A_MODULE_EEPROM_LENGTH`` u32 amount of bytes to read
``ETHTOOL_A_MODULE_EEPROM_PAGE`` u8 page number
``ETHTOOL_A_MODULE_EEPROM_BANK`` u8 bank number
``ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS`` u8 page I2C address
======================================= ====== ==========================
Kernel response contents:
+---------------------------------------------+--------+---------------------+
| ``ETHTOOL_A_MODULE_EEPROM_HEADER`` | nested | reply header |
+---------------------------------------------+--------+---------------------+
| ``ETHTOOL_A_MODULE_EEPROM_DATA`` | nested | array of bytes from |
| | | module EEPROM |
+---------------------------------------------+--------+---------------------+
``ETHTOOL_A_MODULE_EEPROM_DATA`` has an attribute length equal to the amount of
bytes driver actually read.
Request translation
===================
......@@ -1415,8 +1447,8 @@ are netlink only.
``ETHTOOL_GET_DUMP_FLAG`` n/a
``ETHTOOL_GET_DUMP_DATA`` n/a
``ETHTOOL_GET_TS_INFO`` ``ETHTOOL_MSG_TSINFO_GET``
``ETHTOOL_GMODULEINFO`` n/a
``ETHTOOL_GMODULEEEPROM`` n/a
``ETHTOOL_GMODULEINFO`` ``ETHTOOL_MSG_MODULE_EEPROM_GET``
``ETHTOOL_GMODULEEEPROM`` ``ETHTOOL_MSG_MODULE_EEPROM_GET``
``ETHTOOL_GEEE`` ``ETHTOOL_MSG_EEE_GET``
``ETHTOOL_SEEE`` ``ETHTOOL_MSG_EEE_SET``
``ETHTOOL_GRSSH`` n/a
......
......@@ -81,6 +81,7 @@ enum {
#define ETH_RSS_HASH_NO_CHANGE 0
struct net_device;
struct netlink_ext_ack;
/* Some generic methods drivers may use in their ethtool_ops */
u32 ethtool_op_get_link(struct net_device *dev);
......@@ -262,6 +263,31 @@ struct ethtool_pause_stats {
u64 rx_pause_frames;
};
#define ETH_MODULE_EEPROM_PAGE_LEN 128
#define ETH_MODULE_MAX_I2C_ADDRESS 0x7f
/**
* struct ethtool_module_eeprom - EEPROM dump from specified page
* @offset: Offset within the specified EEPROM page to begin read, in bytes.
* @length: Number of bytes to read.
* @page: Page number to read from.
* @bank: Page bank number to read from, if applicable by EEPROM spec.
* @i2c_address: I2C address of a page. Value less than 0x7f expected. Most
* EEPROMs use 0x50 or 0x51.
* @data: Pointer to buffer with EEPROM data of @length size.
*
* This can be used to manage pages during EEPROM dump in ethtool and pass
* required information to the driver.
*/
struct ethtool_module_eeprom {
__u32 offset;
__u32 length;
__u8 page;
__u8 bank;
__u8 i2c_address;
__u8 *data;
};
/**
* struct ethtool_ops - optional netdev operations
* @cap_link_lanes_supported: indicates if the driver supports lanes
......@@ -414,6 +440,9 @@ struct ethtool_pause_stats {
* cannot use the standard PHY library helpers.
* @get_phy_tunable: Read the value of a PHY tunable.
* @set_phy_tunable: Set the value of a PHY tunable.
* @get_module_eeprom_by_page: Get a region of plug-in module EEPROM data from
* specified page. Returns a negative error code or the amount of bytes
* read.
*
* All operations are optional (i.e. the function pointer may be set
* to %NULL) and callers must take this into account. Callers must
......@@ -519,6 +548,9 @@ struct ethtool_ops {
const struct ethtool_tunable *, void *);
int (*set_phy_tunable)(struct net_device *,
const struct ethtool_tunable *, const void *);
int (*get_module_eeprom_by_page)(struct net_device *dev,
const struct ethtool_module_eeprom *page,
struct netlink_ext_ack *extack);
};
int ethtool_check_ops(const struct ethtool_ops *ops);
......@@ -542,7 +574,6 @@ int ethtool_virtdev_set_link_ksettings(struct net_device *dev,
const struct ethtool_link_ksettings *cmd,
u32 *dev_speed, u8 *dev_duplex);
struct netlink_ext_ack;
struct phy_device;
struct phy_tdr_config;
......
......@@ -44,6 +44,7 @@ enum {
ETHTOOL_MSG_TUNNEL_INFO_GET,
ETHTOOL_MSG_FEC_GET,
ETHTOOL_MSG_FEC_SET,
ETHTOOL_MSG_MODULE_EEPROM_GET,
/* add new constants above here */
__ETHTOOL_MSG_USER_CNT,
......@@ -84,6 +85,7 @@ enum {
ETHTOOL_MSG_TUNNEL_INFO_GET_REPLY,
ETHTOOL_MSG_FEC_GET_REPLY,
ETHTOOL_MSG_FEC_NTF,
ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY,
/* add new constants above here */
__ETHTOOL_MSG_KERNEL_CNT,
......@@ -646,6 +648,23 @@ enum {
ETHTOOL_A_FEC_MAX = (__ETHTOOL_A_FEC_CNT - 1)
};
/* MODULE EEPROM */
enum {
ETHTOOL_A_MODULE_EEPROM_UNSPEC,
ETHTOOL_A_MODULE_EEPROM_HEADER, /* nest - _A_HEADER_* */
ETHTOOL_A_MODULE_EEPROM_OFFSET, /* u32 */
ETHTOOL_A_MODULE_EEPROM_LENGTH, /* u32 */
ETHTOOL_A_MODULE_EEPROM_PAGE, /* u8 */
ETHTOOL_A_MODULE_EEPROM_BANK, /* u8 */
ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS, /* u8 */
ETHTOOL_A_MODULE_EEPROM_DATA, /* nested */
__ETHTOOL_A_MODULE_EEPROM_CNT,
ETHTOOL_A_MODULE_EEPROM_MAX = (__ETHTOOL_A_MODULE_EEPROM_CNT - 1)
};
/* generic netlink info */
#define ETHTOOL_GENL_NAME "ethtool"
#define ETHTOOL_GENL_VERSION 1
......
......@@ -7,4 +7,4 @@ obj-$(CONFIG_ETHTOOL_NETLINK) += ethtool_nl.o
ethtool_nl-y := netlink.o bitset.o strset.o linkinfo.o linkmodes.o \
linkstate.o debug.o wol.o features.o privflags.o rings.o \
channels.o coalesce.o pause.o eee.o tsinfo.o cabletest.o \
tunnels.o fec.o
tunnels.o fec.o eeprom.o
// SPDX-License-Identifier: GPL-2.0-only
#include <linux/ethtool.h>
#include "netlink.h"
#include "common.h"
struct eeprom_req_info {
struct ethnl_req_info base;
u32 offset;
u32 length;
u8 page;
u8 bank;
u8 i2c_address;
};
struct eeprom_reply_data {
struct ethnl_reply_data base;
u32 length;
u8 *data;
};
#define MODULE_EEPROM_REQINFO(__req_base) \
container_of(__req_base, struct eeprom_req_info, base)
#define MODULE_EEPROM_REPDATA(__reply_base) \
container_of(__reply_base, struct eeprom_reply_data, base)
static int eeprom_prepare_data(const struct ethnl_req_info *req_base,
struct ethnl_reply_data *reply_base,
struct genl_info *info)
{
struct eeprom_reply_data *reply = MODULE_EEPROM_REPDATA(reply_base);
struct eeprom_req_info *request = MODULE_EEPROM_REQINFO(req_base);
struct ethtool_module_eeprom page_data = {0};
struct net_device *dev = reply_base->dev;
int ret;
if (!dev->ethtool_ops->get_module_eeprom_by_page)
return -EOPNOTSUPP;
page_data.offset = request->offset;
page_data.length = request->length;
page_data.i2c_address = request->i2c_address;
page_data.page = request->page;
page_data.bank = request->bank;
page_data.data = kmalloc(page_data.length, GFP_KERNEL);
if (!page_data.data)
return -ENOMEM;
ret = ethnl_ops_begin(dev);
if (ret)
goto err_free;
ret = dev->ethtool_ops->get_module_eeprom_by_page(dev, &page_data,
info->extack);
if (ret < 0)
goto err_ops;
reply->length = ret;
reply->data = page_data.data;
ethnl_ops_complete(dev);
return 0;
err_ops:
ethnl_ops_complete(dev);
err_free:
kfree(page_data.data);
return ret;
}
static int eeprom_parse_request(struct ethnl_req_info *req_info, struct nlattr **tb,
struct netlink_ext_ack *extack)
{
struct eeprom_req_info *request = MODULE_EEPROM_REQINFO(req_info);
if (!tb[ETHTOOL_A_MODULE_EEPROM_OFFSET] ||
!tb[ETHTOOL_A_MODULE_EEPROM_LENGTH] ||
!tb[ETHTOOL_A_MODULE_EEPROM_PAGE] ||
!tb[ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS])
return -EINVAL;
request->i2c_address = nla_get_u8(tb[ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS]);
request->offset = nla_get_u32(tb[ETHTOOL_A_MODULE_EEPROM_OFFSET]);
request->length = nla_get_u32(tb[ETHTOOL_A_MODULE_EEPROM_LENGTH]);
if (!request->length)
return -EINVAL;
/* The following set of conditions limit the API to only dump 1/2
* EEPROM page without crossing low page boundary located at offset 128.
* This means user may only request dumps of length limited to 128 from
* either low 128 bytes or high 128 bytes.
* For pages higher than 0 only high 128 bytes are accessible.
*/
request->page = nla_get_u8(tb[ETHTOOL_A_MODULE_EEPROM_PAGE]);
if (request->page && request->offset < ETH_MODULE_EEPROM_PAGE_LEN) {
NL_SET_ERR_MSG_ATTR(extack, tb[ETHTOOL_A_MODULE_EEPROM_PAGE],
"reading from lower half page is allowed for page 0 only");
return -EINVAL;
}
if (request->offset < ETH_MODULE_EEPROM_PAGE_LEN &&
request->offset + request->length > ETH_MODULE_EEPROM_PAGE_LEN) {
NL_SET_ERR_MSG_ATTR(extack, tb[ETHTOOL_A_MODULE_EEPROM_LENGTH],
"reading cross half page boundary is illegal");
return -EINVAL;
} else if (request->offset >= ETH_MODULE_EEPROM_PAGE_LEN * 2) {
NL_SET_ERR_MSG_ATTR(extack, tb[ETHTOOL_A_MODULE_EEPROM_OFFSET],
"offset is out of bounds");
return -EINVAL;
} else if (request->offset + request->length > ETH_MODULE_EEPROM_PAGE_LEN * 2) {
NL_SET_ERR_MSG_ATTR(extack, tb[ETHTOOL_A_MODULE_EEPROM_LENGTH],
"reading cross page boundary is illegal");
return -EINVAL;
}
if (tb[ETHTOOL_A_MODULE_EEPROM_BANK])
request->bank = nla_get_u8(tb[ETHTOOL_A_MODULE_EEPROM_BANK]);
return 0;
}
static int eeprom_reply_size(const struct ethnl_req_info *req_base,
const struct ethnl_reply_data *reply_base)
{
const struct eeprom_req_info *request = MODULE_EEPROM_REQINFO(req_base);
return nla_total_size(sizeof(u8) * request->length); /* _EEPROM_DATA */
}
static int eeprom_fill_reply(struct sk_buff *skb,
const struct ethnl_req_info *req_base,
const struct ethnl_reply_data *reply_base)
{
struct eeprom_reply_data *reply = MODULE_EEPROM_REPDATA(reply_base);
return nla_put(skb, ETHTOOL_A_MODULE_EEPROM_DATA, reply->length, reply->data);
}
static void eeprom_cleanup_data(struct ethnl_reply_data *reply_base)
{
struct eeprom_reply_data *reply = MODULE_EEPROM_REPDATA(reply_base);
kfree(reply->data);
}
const struct ethnl_request_ops ethnl_module_eeprom_request_ops = {
.request_cmd = ETHTOOL_MSG_MODULE_EEPROM_GET,
.reply_cmd = ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY,
.hdr_attr = ETHTOOL_A_MODULE_EEPROM_HEADER,
.req_info_size = sizeof(struct eeprom_req_info),
.reply_data_size = sizeof(struct eeprom_reply_data),
.parse_request = eeprom_parse_request,
.prepare_data = eeprom_prepare_data,
.reply_size = eeprom_reply_size,
.fill_reply = eeprom_fill_reply,
.cleanup_data = eeprom_cleanup_data,
};
const struct nla_policy ethnl_module_eeprom_get_policy[] = {
[ETHTOOL_A_MODULE_EEPROM_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
[ETHTOOL_A_MODULE_EEPROM_OFFSET] = { .type = NLA_U32 },
[ETHTOOL_A_MODULE_EEPROM_LENGTH] = { .type = NLA_U32 },
[ETHTOOL_A_MODULE_EEPROM_PAGE] = { .type = NLA_U8 },
[ETHTOOL_A_MODULE_EEPROM_BANK] = { .type = NLA_U8 },
[ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS] =
NLA_POLICY_RANGE(NLA_U8, 0, ETH_MODULE_MAX_I2C_ADDRESS),
};
......@@ -246,6 +246,7 @@ ethnl_default_requests[__ETHTOOL_MSG_USER_CNT] = {
[ETHTOOL_MSG_EEE_GET] = &ethnl_eee_request_ops,
[ETHTOOL_MSG_FEC_GET] = &ethnl_fec_request_ops,
[ETHTOOL_MSG_TSINFO_GET] = &ethnl_tsinfo_request_ops,
[ETHTOOL_MSG_MODULE_EEPROM_GET] = &ethnl_module_eeprom_request_ops,
};
static struct ethnl_dump_ctx *ethnl_dump_context(struct netlink_callback *cb)
......@@ -931,6 +932,16 @@ static const struct genl_ops ethtool_genl_ops[] = {
.policy = ethnl_fec_set_policy,
.maxattr = ARRAY_SIZE(ethnl_fec_set_policy) - 1,
},
{
.cmd = ETHTOOL_MSG_MODULE_EEPROM_GET,
.flags = GENL_UNS_ADMIN_PERM,
.doit = ethnl_default_doit,
.start = ethnl_default_start,
.dumpit = ethnl_default_dumpit,
.done = ethnl_default_done,
.policy = ethnl_module_eeprom_get_policy,
.maxattr = ARRAY_SIZE(ethnl_module_eeprom_get_policy) - 1,
},
};
static const struct genl_multicast_group ethtool_nl_mcgrps[] = {
......
......@@ -345,6 +345,7 @@ extern const struct ethnl_request_ops ethnl_pause_request_ops;
extern const struct ethnl_request_ops ethnl_eee_request_ops;
extern const struct ethnl_request_ops ethnl_tsinfo_request_ops;
extern const struct ethnl_request_ops ethnl_fec_request_ops;
extern const struct ethnl_request_ops ethnl_module_eeprom_request_ops;
extern const struct nla_policy ethnl_header_policy[ETHTOOL_A_HEADER_FLAGS + 1];
extern const struct nla_policy ethnl_header_policy_stats[ETHTOOL_A_HEADER_FLAGS + 1];
......@@ -378,6 +379,7 @@ extern const struct nla_policy ethnl_cable_test_tdr_act_policy[ETHTOOL_A_CABLE_T
extern const struct nla_policy ethnl_tunnel_info_get_policy[ETHTOOL_A_TUNNEL_INFO_HEADER + 1];
extern const struct nla_policy ethnl_fec_get_policy[ETHTOOL_A_FEC_HEADER + 1];
extern const struct nla_policy ethnl_fec_set_policy[ETHTOOL_A_FEC_AUTO + 1];
extern const struct nla_policy ethnl_module_eeprom_get_policy[ETHTOOL_A_MODULE_EEPROM_DATA + 1];
int ethnl_set_linkinfo(struct sk_buff *skb, struct genl_info *info);
int ethnl_set_linkmodes(struct sk_buff *skb, struct genl_info *info);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment