mtd: rawnand: Move platform_nand_xxx definitions out of rawnand.h

platform_nand_xxx definitions are just used by the plat_nand driver.
Let's move those definitions out of the core/driver-agnostic rawnand.h
header.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

arch/arm/mach-ep93xx/snappercl15.c

@@ -23,8 +23,7 @@
 #include <linux/i2c.h>
 #include <linux/fb.h>
 
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
+#include <linux/mtd/platnand.h>
 
 #include <mach/hardware.h>
 #include <linux/platform_data/video-ep93xx.h>

arch/arm/mach-ep93xx/ts72xx.c

@@ -16,8 +16,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
+#include <linux/mtd/platnand.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/mmc_spi.h>

arch/arm/mach-imx/mach-qong.c

@@ -18,7 +18,7 @@
 #include <linux/memory.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
-#include <linux/mtd/rawnand.h>
+#include <linux/mtd/platnand.h>
 #include <linux/gpio.h>
 
 #include <asm/mach-types.h>

arch/arm/mach-ixp4xx/ixdp425-setup.c

@@ -20,6 +20,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/platnand.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <asm/types.h>

arch/arm/mach-omap1/board-fsample.c

@@ -16,8 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
+#include <linux/mtd/platnand.h>
 #include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/smc91x.h>

arch/arm/mach-omap1/board-h2.c

@@ -24,8 +24,7 @@
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
+#include <linux/mtd/platnand.h>
 #include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/mfd/tps65010.h>

arch/arm/mach-omap1/board-h3.c

@@ -23,7 +23,7 @@
 #include <linux/workqueue.h>
 #include <linux/i2c.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
+#include <linux/mtd/platnand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/input.h>

arch/arm/mach-omap1/board-perseus2.c

@@ -16,8 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
+#include <linux/mtd/platnand.h>
 #include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/smc91x.h>

arch/arm/mach-orion5x/ts78xx-setup.c

@@ -16,8 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
+#include <linux/mtd/platnand.h>
 #include <linux/timeriomem-rng.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-pxa/balloon3.c

@@ -25,11 +25,10 @@
 #include <linux/ioport.h>
 #include <linux/ucb1400.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
 #include <linux/types.h>
 #include <linux/platform_data/pcf857x.h>
 #include <linux/platform_data/i2c-pxa.h>
-#include <linux/mtd/rawnand.h>
+#include <linux/mtd/platnand.h>
 #include <linux/mtd/physmap.h>
 #include <linux/regulator/max1586.h>
 

arch/arm/mach-pxa/em-x270.c

@@ -15,8 +15,7 @@
 
 #include <linux/dm9000.h>
 #include <linux/platform_data/rtc-v3020.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
+#include <linux/mtd/platnand.h>
 #include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>

arch/arm/mach-pxa/palmtx.c

@@ -28,8 +28,7 @@
 #include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
+#include <linux/mtd/platnand.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/physmap.h>
 

arch/mips/alchemy/devboards/db1200.c

@@ -29,8 +29,7 @@
 #include <linux/leds.h>
 #include <linux/mmc/host.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
+#include <linux/mtd/platnand.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 #include <linux/spi/spi.h>

arch/mips/alchemy/devboards/db1300.c

@@ -19,8 +19,7 @@
 #include <linux/mmc/host.h>
 #include <linux/module.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
+#include <linux/mtd/platnand.h>
 #include <linux/platform_device.h>
 #include <linux/smsc911x.h>
 #include <linux/wm97xx.h>

arch/mips/alchemy/devboards/db1550.c

@@ -13,8 +13,7 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
+#include <linux/mtd/platnand.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/spi/spi.h>

arch/mips/netlogic/xlr/platform-flash.c

@@ -19,8 +19,7 @@
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/physmap.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
+#include <linux/mtd/platnand.h>
 
 #include <asm/netlogic/haldefs.h>
 #include <asm/netlogic/xlr/iomap.h>

arch/mips/pnx833x/common/platform.c

@@ -30,8 +30,7 @@
 #include <linux/resource.h>
 #include <linux/serial.h>
 #include <linux/serial_pnx8xxx.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
+#include <linux/mtd/platnand.h>
 
 #include <irq.h>
 #include <irq-mapping.h>

arch/mips/rb532/devices.c

@@ -20,9 +20,8 @@
 #include <linux/ctype.h>
 #include <linux/string.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/rawnand.h>
+#include <linux/mtd/platnand.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>

arch/sh/boards/mach-migor/setup.c

@@ -14,7 +14,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mfd/tmio.h>
-#include <linux/mtd/rawnand.h>
+#include <linux/mtd/platnand.h>
 #include <linux/i2c.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>

drivers/mtd/nand/raw/plat_nand.c

@@ -15,8 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
+#include <linux/mtd/platnand.h>
 
 struct plat_nand_data {
 	struct nand_chip	chip;

include/linux/mtd/platnand.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
+ *			  Steven J. Hill <sjhill@realitydiluted.com>
+ *			  Thomas Gleixner <tglx@linutronix.de>
+ *
+ * Contains all platform NAND related definitions.
+ */
+
+#ifndef __LINUX_MTD_PLATNAND_H
+#define __LINUX_MTD_PLATNAND_H
+
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/platform_device.h>
+
+/**
+ * struct platform_nand_chip - chip level device structure
+ * @nr_chips: max. number of chips to scan for
+ * @chip_offset: chip number offset
+ * @nr_partitions: number of partitions pointed to by partitions (or zero)
+ * @partitions: mtd partition list
+ * @chip_delay: R/B delay value in us
+ * @options: Option flags, e.g. 16bit buswidth
+ * @bbt_options: BBT option flags, e.g. NAND_BBT_USE_FLASH
+ * @part_probe_types: NULL-terminated array of probe types
+ */
+struct platform_nand_chip {
+	int nr_chips;
+	int chip_offset;
+	int nr_partitions;
+	struct mtd_partition *partitions;
+	int chip_delay;
+	unsigned int options;
+	unsigned int bbt_options;
+	const char **part_probe_types;
+};
+
+/**
+ * struct platform_nand_ctrl - controller level device structure
+ * @probe: platform specific function to probe/setup hardware
+ * @remove: platform specific function to remove/teardown hardware
+ * @dev_ready: platform specific function to read ready/busy pin
+ * @select_chip: platform specific chip select function
+ * @cmd_ctrl: platform specific function for controlling
+ *	      ALE/CLE/nCE. Also used to write command and address
+ * @write_buf: platform specific function for write buffer
+ * @read_buf: platform specific function for read buffer
+ * @priv: private data to transport driver specific settings
+ *
+ * All fields are optional and depend on the hardware driver requirements
+ */
+struct platform_nand_ctrl {
+	int (*probe)(struct platform_device *pdev);
+	void (*remove)(struct platform_device *pdev);
+	int (*dev_ready)(struct nand_chip *chip);
+	void (*select_chip)(struct nand_chip *chip, int cs);
+	void (*cmd_ctrl)(struct nand_chip *chip, int dat, unsigned int ctrl);
+	void (*write_buf)(struct nand_chip *chip, const uint8_t *buf, int len);
+	void (*read_buf)(struct nand_chip *chip, uint8_t *buf, int len);
+	void *priv;
+};
+
+/**
+ * struct platform_nand_data - container structure for platform-specific data
+ * @chip: chip level chip structure
+ * @ctrl: controller level device structure
+ */
+struct platform_nand_data {
+	struct platform_nand_chip chip;
+	struct platform_nand_ctrl ctrl;
+};
+
+#endif /* __LINUX_MTD_PLATNAND_H */

include/linux/mtd/rawnand.h

@@ -1540,66 +1540,6 @@ int nand_isbad_bbt(struct nand_chip *chip, loff_t offs, int allowbbt);
 int nand_erase_nand(struct nand_chip *chip, struct erase_info *instr,
 		    int allowbbt);
 
-/**
- * struct platform_nand_chip - chip level device structure
- * @nr_chips:		max. number of chips to scan for
- * @chip_offset:	chip number offset
- * @nr_partitions:	number of partitions pointed to by partitions (or zero)
- * @partitions:		mtd partition list
- * @chip_delay:		R/B delay value in us
- * @options:		Option flags, e.g. 16bit buswidth
- * @bbt_options:	BBT option flags, e.g. NAND_BBT_USE_FLASH
- * @part_probe_types:	NULL-terminated array of probe types
- */
-struct platform_nand_chip {
-	int nr_chips;
-	int chip_offset;
-	int nr_partitions;
-	struct mtd_partition *partitions;
-	int chip_delay;
-	unsigned int options;
-	unsigned int bbt_options;
-	const char **part_probe_types;
-};
-
-/* Keep gcc happy */
-struct platform_device;
-
-/**
- * struct platform_nand_ctrl - controller level device structure
- * @probe:		platform specific function to probe/setup hardware
- * @remove:		platform specific function to remove/teardown hardware
- * @dev_ready:		platform specific function to read ready/busy pin
- * @select_chip:	platform specific chip select function
- * @cmd_ctrl:		platform specific function for controlling
- *			ALE/CLE/nCE. Also used to write command and address
- * @write_buf:		platform specific function for write buffer
- * @read_buf:		platform specific function for read buffer
- * @priv:		private data to transport driver specific settings
- *
- * All fields are optional and depend on the hardware driver requirements
- */
-struct platform_nand_ctrl {
-	int (*probe)(struct platform_device *pdev);
-	void (*remove)(struct platform_device *pdev);
-	int (*dev_ready)(struct nand_chip *chip);
-	void (*select_chip)(struct nand_chip *chip, int cs);
-	void (*cmd_ctrl)(struct nand_chip *chip, int dat, unsigned int ctrl);
-	void (*write_buf)(struct nand_chip *chip, const uint8_t *buf, int len);
-	void (*read_buf)(struct nand_chip *chip, uint8_t *buf, int len);
-	void *priv;
-};
-
-/**
- * struct platform_nand_data - container structure for platform-specific data
- * @chip:		chip level chip structure
- * @ctrl:		controller level device structure
- */
-struct platform_nand_data {
-	struct platform_nand_chip chip;
-	struct platform_nand_ctrl ctrl;
-};
-
 /* return the supported asynchronous timing mode. */
 static inline int onfi_get_async_timing_mode(struct nand_chip *chip)
 {