Commit c7ac15ce authored by Andy Shevchenko's avatar Andy Shevchenko Committed by Greg Kroah-Hartman

serial: core: move UPF_NO_TXEN_TEST to quirks and rename

First 16 bits in the flags field are user-visible except
UPF_NO_TXEN_TEST. To keep it clean we introduce internal quirks and move
UPF_NO_TXEN_TEST to them. Rename the constant to UPQ_NO_TXEN_TEST to
distinguish with port flags. Users are converted accordingly.

The quirks field might be extended later to hold the additional ones.
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent a17e74c5
......@@ -497,6 +497,11 @@ static void univ8250_rsa_support(struct uart_ops *ops)
#define univ8250_rsa_support(x) do { } while (0)
#endif /* CONFIG_SERIAL_8250_RSA */
static inline void serial8250_apply_quirks(struct uart_8250_port *up)
{
up->port.quirks |= skip_txen_test ? UPQ_NO_TXEN_TEST : 0;
}
static void __init serial8250_isa_init_ports(void)
{
struct uart_8250_port *up;
......@@ -577,9 +582,7 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
up->port.dev = dev;
if (skip_txen_test)
up->port.flags |= UPF_NO_TXEN_TEST;
serial8250_apply_quirks(up);
uart_add_one_port(drv, &up->port);
}
}
......@@ -1006,9 +1009,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
if (up->port.dev)
uart->port.dev = up->port.dev;
if (skip_txen_test)
uart->port.flags |= UPF_NO_TXEN_TEST;
if (up->port.flags & UPF_FIXED_TYPE)
uart->port.type = up->port.type;
......@@ -1047,6 +1047,7 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
serial8250_isa_config(0, &uart->port,
&uart->capabilities);
serial8250_apply_quirks(uart);
ret = uart_add_one_port(&serial8250_reg, &uart->port);
if (ret == 0)
ret = uart->port.line;
......@@ -1081,11 +1082,10 @@ void serial8250_unregister_port(int line)
uart_remove_one_port(&serial8250_reg, &uart->port);
if (serial8250_isa_devs) {
uart->port.flags &= ~UPF_BOOT_AUTOCONF;
if (skip_txen_test)
uart->port.flags |= UPF_NO_TXEN_TEST;
uart->port.type = PORT_UNKNOWN;
uart->port.dev = &serial8250_isa_devs->dev;
uart->capabilities = 0;
serial8250_apply_quirks(uart);
uart_add_one_port(&serial8250_reg, &uart->port);
} else {
uart->port.dev = NULL;
......
......@@ -1548,7 +1548,7 @@ static int skip_tx_en_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
port->port.flags |= UPF_NO_TXEN_TEST;
port->port.quirks |= UPQ_NO_TXEN_TEST;
dev_dbg(&priv->dev->dev,
"serial8250: skipping TxEn test for device [%04x:%04x] subsystem [%04x:%04x]\n",
priv->dev->vendor, priv->dev->device,
......
......@@ -2304,7 +2304,7 @@ int serial8250_do_startup(struct uart_port *port)
* test if we receive TX irq. This way, we'll never enable
* UART_BUG_TXEN.
*/
if (up->port.flags & UPF_NO_TXEN_TEST)
if (up->port.quirks & UPQ_NO_TXEN_TEST)
goto dont_test_tx_en;
/*
......
......@@ -20,7 +20,7 @@
#ifndef LINUX_SERIAL_CORE_H
#define LINUX_SERIAL_CORE_H
#include <linux/bitops.h>
#include <linux/compiler.h>
#include <linux/interrupt.h>
#include <linux/circ_buf.h>
......@@ -144,7 +144,7 @@ struct uart_port {
unsigned char x_char; /* xon/xoff char */
unsigned char regshift; /* reg offset shift */
unsigned char iotype; /* io access style */
unsigned char unused1;
unsigned char quirks; /* internal quirks */
#define UPIO_PORT (SERIAL_IO_PORT) /* 8b I/O port access */
#define UPIO_HUB6 (SERIAL_IO_HUB6) /* Hub6 ISA card */
......@@ -155,6 +155,9 @@ struct uart_port {
#define UPIO_MEM32BE (SERIAL_IO_MEM32BE) /* 32b big endian */
#define UPIO_MEM16 (SERIAL_IO_MEM16) /* 16b little endian */
/* quirks must be updated while holding port mutex */
#define UPQ_NO_TXEN_TEST BIT(0)
unsigned int read_status_mask; /* driver specific */
unsigned int ignore_status_mask; /* driver specific */
struct uart_state *state; /* pointer to parent state */
......@@ -175,7 +178,6 @@ struct uart_port {
* [for bit definitions in the UPF_CHANGE_MASK]
*
* Bits [0..UPF_LAST_USER] are userspace defined/visible/changeable
* except bit 15 (UPF_NO_TXEN_TEST) which is masked off.
* The remaining bits are serial-core specific and not modifiable by
* userspace.
*/
......@@ -192,7 +194,6 @@ struct uart_port {
#define UPF_SPD_SHI ((__force upf_t) ASYNC_SPD_SHI /* 12 */ )
#define UPF_LOW_LATENCY ((__force upf_t) ASYNC_LOW_LATENCY /* 13 */ )
#define UPF_BUGGY_UART ((__force upf_t) ASYNC_BUGGY_UART /* 14 */ )
#define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15))
#define UPF_MAGIC_MULTIPLIER ((__force upf_t) ASYNC_MAGIC_MULTIPLIER /* 16 */ )
#define UPF_NO_THRE_TEST ((__force upf_t) (1 << 19))
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment