Commit c7bd4819 authored by Ray Jui's avatar Ray Jui Committed by Bjorn Helgaas

PCI: iproc: Add iProc PCIe MSI device tree binding

Update the iProc PCIe device tree bindings with added binding information
for MSI.
Signed-off-by: default avatarRay Jui <rjui@broadcom.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: default avatarAnup Patel <anup.patel@broadcom.com>
Reviewed-by: default avatarVikram Prakash <vikramp@broadcom.com>
Reviewed-by: default avatarScott Branden <sbranden@broadcom.com>
parent 943ebae7
......@@ -35,6 +35,28 @@ Optional:
- brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to
increase the outbound window size
MSI support (optional):
For older platforms without MSI integrated in the GIC, iProc PCIe core provides
an event queue based MSI support. The iProc MSI uses host memories to store
MSI posted writes in the event queues
- msi-parent: Link to the device node of the MSI controller. On newer iProc
platforms, the MSI controller may be gicv2m or gicv3-its. On older iProc
platforms without MSI support in its interrupt controller, one may use the
event queue based MSI support integrated within the iProc PCIe core.
When the iProc event queue based MSI is used, one needs to define the
following properties in the MSI device node:
- compatible: Must be "brcm,iproc-msi"
- msi-controller: claims itself as an MSI controller
- interrupt-parent: Link to its parent interrupt device
- interrupts: List of interrupt IDs from its parent interrupt device
Optional properties:
- brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that
require the interrupt enable registers to be set explicitly to enable MSI
Example:
pcie0: pcie@18012000 {
compatible = "brcm,iproc-pcie";
......@@ -61,6 +83,19 @@ Example:
brcm,pcie-ob-oarr-size;
brcm,pcie-ob-axi-offset = <0x00000000>;
brcm,pcie-ob-window-size = <256>;
msi-parent = <&msi0>;
/* iProc event queue based MSI */
msi0: msi@18012000 {
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
<GIC_SPI 97 IRQ_TYPE_NONE>,
<GIC_SPI 98 IRQ_TYPE_NONE>,
<GIC_SPI 99 IRQ_TYPE_NONE>,
};
};
pcie1: pcie@18013000 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment