Skip to content

L
linux
Commit c80fe335 authored by Srinivas Kandagatla's avatar Srinivas Kandagatla
Browse files
Options

ARM: STi: STiH415: Add ethernet support. 

This patch adds support to STiH415 SOC, which has two ethernet
snps,dwmac controllers version 3.610. With this patch B2000 and B2020
boards can boot with ethernet in MII and RGMII modes.

Tested on both B2020 and B2000.
Signed-off-by: default avatarSrinivas Kandagatla <srinivas.kandagatla@st.com>
parent bef40df8
Hide whitespace changes
Inline Side-by-side
Showing with 218 additions and 0 deletions
arch/arm/boot/dts/stih415-clock.dtsi
View file @ c80fe335
......@@ -34,5 +34,19 @@ CLKS_ICN_REG_0: CLKS_ICN_REG_0 {
compatible = "fixed-clock";
clock-frequency = <100000000>;
};
CLKS_GMAC0_PHY: clockgenA1@7 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
clock-output-names = "CLKS_GMAC0_PHY";
};
CLKS_ETH1_PHY: clockgenA0@7 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
clock-output-names = "CLKS_ETH1_PHY";
};
};
};
arch/arm/boot/dts/stih415-pinctrl.dtsi
View file @ c80fe335
......@@ -119,6 +119,56 @@ st,pins {
};
};
};
gmac1 {
pinctrl_mii1: mii1 {
st,pins {
txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
col = <&PIO0 7 ALT1 IN BYPASS 1000>;
mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
crs = <&PIO1 2 ALT1 IN BYPASS 1000>;
mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
phyclk = <&PIO2 3 ALT1 IN NICLK 1000 CLK_A>;
};
};
pinctrl_rgmii1: rgmii1-0 {
st,pins {
txd0 = <&PIO0 0 ALT1 OUT DE_IO 1000 CLK_A>;
txd1 = <&PIO0 1 ALT1 OUT DE_IO 1000 CLK_A>;
txd2 = <&PIO0 2 ALT1 OUT DE_IO 1000 CLK_A>;
txd3 = <&PIO0 3 ALT1 OUT DE_IO 1000 CLK_A>;
txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>;
txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
rxd0 = <&PIO1 4 ALT1 IN DE_IO 0 CLK_A>;
rxd1 = <&PIO1 5 ALT1 IN DE_IO 0 CLK_A>;
rxd2 = <&PIO1 6 ALT1 IN DE_IO 0 CLK_A>;
rxd3 = <&PIO1 7 ALT1 IN DE_IO 0 CLK_A>;
rxdv = <&PIO2 0 ALT1 IN DE_IO 500 CLK_A>;
rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
phyclk = <&PIO2 3 ALT4 OUT NICLK 0 CLK_B>;
clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>;
};
};
};
};
pin-controller-front {
......@@ -284,6 +334,77 @@ st,pins {
};
};
};
gmac0{
pinctrl_mii0: mii0 {
st,pins {
mdint = <&PIO13 6 ALT2 IN BYPASS 0>;
txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
crs = <&PIO15 2 ALT2 IN BYPASS 1000>;
col = <&PIO15 3 ALT2 IN BYPASS 1000>;
mdio = <&PIO15 4 ALT2 OUT BYPASS 3000>;
mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
phyclk = <&PIO13 5 ALT2 OUT NICLK 1000 CLK_A>;
};
};
pinctrl_gmii0: gmii0 {
st,pins {
mdint = <&PIO13 6 ALT2 IN BYPASS 0>;
mdio = <&PIO15 4 ALT2 OUT BYPASS 3000>;
mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
txd4 = <&PIO14 4 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
txd5 = <&PIO14 5 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
txd6 = <&PIO14 6 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
txd7 = <&PIO14 7 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
crs = <&PIO15 2 ALT2 IN BYPASS 1000>;
col = <&PIO15 3 ALT2 IN BYPASS 1000>;
rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rxd4 = <&PIO16 4 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rxd5 = <&PIO16 5 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rxd6 = <&PIO16 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rxd7 = <&PIO16 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
clk125 = <&PIO17 6 ALT1 IN NICLK 0 CLK_A>;
phyclk = <&PIO13 5 ALT4 OUT NICLK 0 CLK_B>;
};
};
};
};
pin-controller-left {
......
arch/arm/boot/dts/stih415.dtsi
View file @ c80fe335
......@@ -147,5 +147,53 @@ i2c@fe541000 {
status = "disabled";
};
ethernet0: dwmac@fe810000 {
device_type = "network";
compatible = "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610";
status = "disabled";
reg = <0xfe810000 0x8000>, <0x148 0x4>;
reg-names = "stmmaceth", "sti-ethconf";
interrupts = <0 147 0>, <0 148 0>, <0 149 0>;
interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
resets = <&softreset STIH415_ETH0_SOFTRESET>;
reset-names = "stmmaceth";
snps,pbl = <32>;
snps,mixed-burst;
snps,force_sf_dma_mode;
st,syscon = <&syscfg_rear>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii0>;
clock-names = "stmmaceth";
clocks = <&CLKS_GMAC0_PHY>;
};
ethernet1: dwmac@fef08000 {
device_type = "network";
compatible = "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610";
status = "disabled";
reg = <0xfef08000 0x8000>, <0x74 0x4>;
reg-names = "stmmaceth", "sti-ethconf";
interrupts = <0 150 0>, <0 151 0>, <0 152 0>;
interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
snps,pbl = <32>;
snps,mixed-burst;
snps,force_sf_dma_mode;
st,syscon = <&syscfg_sbc>;
resets = <&softreset STIH415_ETH1_SOFTRESET>;
reset-names = "stmmaceth";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii1>;
clock-names = "stmmaceth";
clocks = <&CLKS_ETH1_PHY>;
};
};
};
arch/arm/boot/dts/stih41x-b2000.dtsi
View file @ c80fe335
......@@ -20,6 +20,8 @@ chosen {
aliases {
ttyAS0 = &serial2;
ethernet0 = &ethernet0;
ethernet1 = &ethernet1;
};
soc {
......@@ -46,5 +48,25 @@ i2c@fed41000 {
status = "okay";
};
ethernet0: dwmac@fe810000 {
status = "okay";
phy-mode = "mii";
pinctrl-0 = <&pinctrl_mii0>;
snps,reset-gpio = <&PIO106 2>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 10000>;
};
ethernet1: dwmac@fef08000 {
status = "disabled";
phy-mode = "mii";
st,tx-retime-src = "txclk";
snps,reset-gpio = <&PIO4 7>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 10000>;
};
};
};
arch/arm/boot/dts/stih41x-b2020.dtsi
View file @ c80fe335
......@@ -19,6 +19,7 @@ chosen {
aliases {
ttyAS0 = &sbc_serial1;
ethernet1 = &ethernet1;
};
soc {
sbc_serial1: serial@fe531000 {
......@@ -60,5 +61,17 @@ i2c@fe540000 {
i2c@fe541000 {
status = "okay";
};
ethernet1: dwmac@fef08000 {
status = "okay";
phy-mode = "rgmii-id";
max-speed = <1000>;
st,tx-retime-src = "clk_125";
snps,reset-gpio = <&PIO3 0>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 10000>;
pinctrl-0 = <&pinctrl_rgmii1>;
};
};
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7