Commit c83495af authored by Mark Brown's avatar Mark Brown

ASoC: Disable WM8996 CPVDD supply when not in use

The WM8996 only requires CPVDD when the charge pump is active so control
it separately to the other supplies, only enabling it when the charge pump
is active. This will result in a small power saving on systems which are
able to provide independent software control of the supply.
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: default avatarLiam Girdwood <lrg@ti.com>
parent da07ecd9
......@@ -41,12 +41,11 @@
#define HPOUT2L 4
#define HPOUT2R 8
#define WM8996_NUM_SUPPLIES 4
#define WM8996_NUM_SUPPLIES 3
static const char *wm8996_supply_names[WM8996_NUM_SUPPLIES] = {
"DBVDD",
"AVDD1",
"AVDD2",
"CPVDD",
};
struct wm8996_priv {
......@@ -71,6 +70,7 @@ struct wm8996_priv {
struct regulator_bulk_data supplies[WM8996_NUM_SUPPLIES];
struct notifier_block disable_nb[WM8996_NUM_SUPPLIES];
struct regulator *cpvdd;
struct wm8996_pdata pdata;
......@@ -112,7 +112,6 @@ static int wm8996_regulator_event_##n(struct notifier_block *nb, \
WM8996_REGULATOR_EVENT(0)
WM8996_REGULATOR_EVENT(1)
WM8996_REGULATOR_EVENT(2)
WM8996_REGULATOR_EVENT(3)
static const u16 wm8996_reg[WM8996_MAX_REGISTER] = {
[WM8996_SOFTWARE_RESET] = 0x8996,
......@@ -670,16 +669,29 @@ SOC_SINGLE_TLV("DSP2 EQ B5 Volume", WM8996_DSP2_RX_EQ_GAINS_2, 6, 31, 0,
static int cp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
int ret = 0;
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
ret = regulator_enable(wm8996->cpvdd);
if (ret != 0)
dev_err(codec->dev, "Failed to enable CPVDD: %d\n",
ret);
break;
case SND_SOC_DAPM_POST_PMU:
msleep(5);
break;
case SND_SOC_DAPM_POST_PMD:
regulator_disable_deferred(wm8996->cpvdd, 20);
break;
default:
BUG();
return -EINVAL;
ret = -EINVAL;
}
return 0;
return ret;
}
static int rmv_short_event(struct snd_soc_dapm_widget *w,
......@@ -988,7 +1000,8 @@ SND_SOC_DAPM_SUPPLY_S("SYSCLK", 1, WM8996_AIF_CLOCKING_1, 0, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("SYSDSPCLK", 2, WM8996_CLOCKING_1, 1, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("AIFCLK", 2, WM8996_CLOCKING_1, 2, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("Charge Pump", 2, WM8996_CHARGE_PUMP_1, 15, 0, cp_event,
SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_SUPPLY("LDO2", WM8996_POWER_MANAGEMENT_2, 1, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("MICB1 Audio", WM8996_MICBIAS_1, 4, 1, NULL, 0),
......@@ -2573,7 +2586,13 @@ static int wm8996_probe(struct snd_soc_codec *codec)
wm8996->disable_nb[0].notifier_call = wm8996_regulator_event_0;
wm8996->disable_nb[1].notifier_call = wm8996_regulator_event_1;
wm8996->disable_nb[2].notifier_call = wm8996_regulator_event_2;
wm8996->disable_nb[3].notifier_call = wm8996_regulator_event_3;
wm8996->cpvdd = regulator_get(&i2c->dev, "CPVDD");
if (IS_ERR(wm8996->cpvdd)) {
ret = PTR_ERR(wm8996->cpvdd);
dev_err(&i2c->dev, "Failed to get CPVDD: %d\n", ret);
goto err_get;
}
/* This should really be moved into the regulator core */
for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++) {
......@@ -2590,7 +2609,7 @@ static int wm8996_probe(struct snd_soc_codec *codec)
wm8996->supplies);
if (ret != 0) {
dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
goto err_get;
goto err_cpvdd;
}
if (wm8996->pdata.ldo_ena >= 0) {
......@@ -2833,6 +2852,8 @@ static int wm8996_probe(struct snd_soc_codec *codec)
gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 0);
regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
err_cpvdd:
regulator_put(wm8996->cpvdd);
err_get:
regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
err:
......@@ -2856,6 +2877,7 @@ static int wm8996_remove(struct snd_soc_codec *codec)
for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++)
regulator_unregister_notifier(wm8996->supplies[i].consumer,
&wm8996->disable_nb[i]);
regulator_put(wm8996->cpvdd);
regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment