Commit c8466a91 authored by Joonyoung Shim's avatar Joonyoung Shim Committed by Inki Dae

drm/exynos: add Exynos5433 decon driver

DECON(Display and Enhancement Controller) is new IP replacing FIMD in
Exynos5433. This patch adds Exynos5433 decon driver.
Signed-off-by: default avatarJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: default avatarHyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: default avatarInki Dae <inki.dae@samsung.com>
parent 9a09a69a
Device-Tree bindings for Samsung Exynos SoC display controller (DECON)
DECON (Display and Enhancement Controller) is the Display Controller for the
Exynos series of SoCs which transfers the image data from a video memory
buffer to an external LCD interface.
Required properties:
- compatible: value should be "samsung,exynos5433-decon";
- reg: physical base address and length of the DECON registers set.
- interrupts: should contain a list of all DECON IP block interrupts in the
order: VSYNC, LCD_SYSTEM. The interrupt specifier format
depends on the interrupt controller used.
- interrupt-names: should contain the interrupt names: "vsync", "lcd_sys"
in the same order as they were listed in the interrupts
property.
- clocks: must include clock specifiers corresponding to entries in the
clock-names property.
- clock-names: list of clock names sorted in the same order as the clocks
property. Must contain "aclk_decon", "aclk_smmu_decon0x",
"aclk_xiu_decon0x", "pclk_smmu_decon0x", clk_decon_vclk",
"sclk_decon_eclk"
- ports: contains a port which is connected to mic node. address-cells and
size-cells must 1 and 0, respectively.
- port: contains an endpoint node which is connected to the endpoint in the mic
node. The reg value muset be 0.
- i80-if-timings: specify whether the panel which is connected to decon uses
i80 lcd interface or mipi video interface. This node contains
no timing information as that of fimd does. Because there is
no register in decon to specify i80 interface timing value,
it is not needed, but make it remain to use same kind of node
in fimd and exynos7 decon.
Example:
SoC specific DT entry:
decon: decon@13800000 {
compatible = "samsung,exynos5433-decon";
reg = <0x13800000 0x2104>;
clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
<&cmu_disp CLK_ACLK_XIU_DECON0X>,
<&cmu_disp CLK_PCLK_SMMU_DECON0X>,
<&cmu_disp CLK_SCLK_DECON_VCLK>,
<&cmu_disp CLK_SCLK_DECON_ECLK>;
clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x",
"pclk_smmu_decon0x", "sclk_decon_vclk", "sclk_decon_eclk";
interrupt-names = "vsync", "lcd_sys";
interrupts = <0 202 0>, <0 203 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
decon_to_mic: endpoint {
remote-endpoint = <&mic_to_decon>;
};
};
};
};
Board specific DT entry:
&decon {
i80-if-timings {
};
};
...@@ -24,6 +24,12 @@ config DRM_EXYNOS_FIMD ...@@ -24,6 +24,12 @@ config DRM_EXYNOS_FIMD
help help
Choose this option if you want to use Exynos FIMD for DRM. Choose this option if you want to use Exynos FIMD for DRM.
config DRM_EXYNOS5433_DECON
bool "Exynos5433 DRM DECON"
depends on DRM_EXYNOS
help
Choose this option if you want to use Exynos5433 DECON for DRM.
config DRM_EXYNOS7_DECON config DRM_EXYNOS7_DECON
bool "Exynos7 DRM DECON" bool "Exynos7 DRM DECON"
depends on DRM_EXYNOS && !FB_S3C depends on DRM_EXYNOS && !FB_S3C
......
...@@ -10,6 +10,7 @@ exynosdrm-y := exynos_drm_drv.o exynos_drm_encoder.o \ ...@@ -10,6 +10,7 @@ exynosdrm-y := exynos_drm_drv.o exynos_drm_encoder.o \
exynosdrm-$(CONFIG_DRM_EXYNOS_IOMMU) += exynos_drm_iommu.o exynosdrm-$(CONFIG_DRM_EXYNOS_IOMMU) += exynos_drm_iommu.o
exynosdrm-$(CONFIG_DRM_EXYNOS_FIMD) += exynos_drm_fimd.o exynosdrm-$(CONFIG_DRM_EXYNOS_FIMD) += exynos_drm_fimd.o
exynosdrm-$(CONFIG_DRM_EXYNOS5433_DECON) += exynos5433_drm_decon.o
exynosdrm-$(CONFIG_DRM_EXYNOS7_DECON) += exynos7_drm_decon.o exynosdrm-$(CONFIG_DRM_EXYNOS7_DECON) += exynos7_drm_decon.o
exynosdrm-$(CONFIG_DRM_EXYNOS_DPI) += exynos_drm_dpi.o exynosdrm-$(CONFIG_DRM_EXYNOS_DPI) += exynos_drm_dpi.o
exynosdrm-$(CONFIG_DRM_EXYNOS_DSI) += exynos_drm_dsi.o exynosdrm-$(CONFIG_DRM_EXYNOS_DSI) += exynos_drm_dsi.o
......
This diff is collapsed.
...@@ -301,6 +301,7 @@ int exynos_drm_create_enc_conn(struct drm_device *dev, ...@@ -301,6 +301,7 @@ int exynos_drm_create_enc_conn(struct drm_device *dev,
struct exynos_drm_display *display); struct exynos_drm_display *display);
extern struct platform_driver fimd_driver; extern struct platform_driver fimd_driver;
extern struct platform_driver exynos5433_decon_driver;
extern struct platform_driver decon_driver; extern struct platform_driver decon_driver;
extern struct platform_driver dp_driver; extern struct platform_driver dp_driver;
extern struct platform_driver dsi_driver; extern struct platform_driver dsi_driver;
......
/*
* Copyright (C) 2014 Samsung Electronics Co.Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundationr
*/
#ifndef EXYNOS_REGS_DECON_H
#define EXYNOS_REGS_DECON_H
/* Exynos543X DECON */
#define DECON_VIDCON0 0x0000
#define DECON_VIDOUTCON0 0x0010
#define DECON_WINCONx(n) (0x0020 + ((n) * 4))
#define DECON_VIDOSDxH(n) (0x0080 + ((n) * 4))
#define DECON_SHADOWCON 0x00A0
#define DECON_VIDOSDxA(n) (0x00B0 + ((n) * 0x20))
#define DECON_VIDOSDxB(n) (0x00B4 + ((n) * 0x20))
#define DECON_VIDOSDxC(n) (0x00B8 + ((n) * 0x20))
#define DECON_VIDOSDxD(n) (0x00BC + ((n) * 0x20))
#define DECON_VIDOSDxE(n) (0x00C0 + ((n) * 0x20))
#define DECON_VIDW0xADD0B0(n) (0x0150 + ((n) * 0x10))
#define DECON_VIDW0xADD0B1(n) (0x0154 + ((n) * 0x10))
#define DECON_VIDW0xADD0B2(n) (0x0158 + ((n) * 0x10))
#define DECON_VIDW0xADD1B0(n) (0x01A0 + ((n) * 0x10))
#define DECON_VIDW0xADD1B1(n) (0x01A4 + ((n) * 0x10))
#define DECON_VIDW0xADD1B2(n) (0x01A8 + ((n) * 0x10))
#define DECON_VIDW0xADD2(n) (0x0200 + ((n) * 4))
#define DECON_LOCALxSIZE(n) (0x0214 + ((n) * 4))
#define DECON_VIDINTCON0 0x0220
#define DECON_VIDINTCON1 0x0224
#define DECON_WxKEYCON0(n) (0x0230 + ((n - 1) * 8))
#define DECON_WxKEYCON1(n) (0x0234 + ((n - 1) * 8))
#define DECON_WxKEYALPHA(n) (0x0250 + ((n - 1) * 4))
#define DECON_WINxMAP(n) (0x0270 + ((n) * 4))
#define DECON_QOSLUT07_00 0x02C0
#define DECON_QOSLUT15_08 0x02C4
#define DECON_QOSCTRL 0x02C8
#define DECON_BLENDERQx(n) (0x0300 + ((n - 1) * 4))
#define DECON_BLENDCON 0x0310
#define DECON_OPE_VIDW0xADD0(n) (0x0400 + ((n) * 4))
#define DECON_OPE_VIDW0xADD1(n) (0x0414 + ((n) * 4))
#define DECON_FRAMEFIFO_REG7 0x051C
#define DECON_FRAMEFIFO_REG8 0x0520
#define DECON_FRAMEFIFO_STATUS 0x0524
#define DECON_CMU 0x1404
#define DECON_UPDATE 0x1410
#define DECON_UPDATE_SCHEME 0x1438
#define DECON_VIDCON1 0x2000
#define DECON_VIDCON2 0x2004
#define DECON_VIDCON3 0x2008
#define DECON_VIDCON4 0x200C
#define DECON_VIDTCON2 0x2028
#define DECON_FRAME_SIZE 0x2038
#define DECON_LINECNT_OP_THRESHOLD 0x203C
#define DECON_TRIGCON 0x2040
#define DECON_TRIGSKIP 0x2050
#define DECON_CRCRDATA 0x20B0
#define DECON_CRCCTRL 0x20B4
/* Exynos5430 DECON */
#define DECON_VIDTCON0 0x2020
#define DECON_VIDTCON1 0x2024
/* Exynos5433 DECON */
#define DECON_VIDTCON00 0x2010
#define DECON_VIDTCON01 0x2014
#define DECON_VIDTCON10 0x2018
#define DECON_VIDTCON11 0x201C
/* Exynos543X DECON Internal */
#define DECON_W013DSTREOCON 0x0320
#define DECON_W233DSTREOCON 0x0324
#define DECON_FRAMEFIFO_REG0 0x0500
#define DECON_ENHANCER_CTRL 0x2100
/* Exynos543X DECON TV */
#define DECON_VCLKCON0 0x0014
#define DECON_VIDINTCON2 0x0228
#define DECON_VIDINTCON3 0x022C
/* VIDCON0 */
#define VIDCON0_SWRESET (1 << 28)
#define VIDCON0_STOP_STATUS (1 << 2)
#define VIDCON0_ENVID (1 << 1)
#define VIDCON0_ENVID_F (1 << 0)
/* VIDOUTCON0 */
#define VIDOUT_LCD_ON (1 << 24)
#define VIDOUT_IF_F_MASK (0x3 << 20)
#define VIDOUT_RGB_IF (0x0 << 20)
#define VIDOUT_COMMAND_IF (0x2 << 20)
/* WINCONx */
#define WINCONx_HAWSWP_F (1 << 16)
#define WINCONx_WSWP_F (1 << 15)
#define WINCONx_BURSTLEN_MASK (0x3 << 10)
#define WINCONx_BURSTLEN_16WORD (0x0 << 10)
#define WINCONx_BURSTLEN_8WORD (0x1 << 10)
#define WINCONx_BURSTLEN_4WORD (0x2 << 10)
#define WINCONx_BLD_PIX_F (1 << 6)
#define WINCONx_BPPMODE_MASK (0xf << 2)
#define WINCONx_BPPMODE_16BPP_565 (0x5 << 2)
#define WINCONx_BPPMODE_16BPP_A1555 (0x6 << 2)
#define WINCONx_BPPMODE_16BPP_I1555 (0x7 << 2)
#define WINCONx_BPPMODE_24BPP_888 (0xb << 2)
#define WINCONx_BPPMODE_24BPP_A1887 (0xc << 2)
#define WINCONx_BPPMODE_25BPP_A1888 (0xd << 2)
#define WINCONx_BPPMODE_32BPP_A8888 (0xd << 2)
#define WINCONx_BPPMODE_16BPP_A4444 (0xe << 2)
#define WINCONx_ALPHA_SEL_F (1 << 1)
#define WINCONx_ENWIN_F (1 << 0)
/* SHADOWCON */
#define SHADOWCON_Wx_PROTECT(n) (1 << (10 + (n)))
/* VIDOSDxD */
#define VIDOSD_Wx_ALPHA_R_F(n) (((n) & 0xff) << 16)
#define VIDOSD_Wx_ALPHA_G_F(n) (((n) & 0xff) << 8)
#define VIDOSD_Wx_ALPHA_B_F(n) (((n) & 0xff) << 0)
/* VIDINTCON0 */
#define VIDINTCON0_FRAMEDONE (1 << 17)
#define VIDINTCON0_INTFRMEN (1 << 12)
#define VIDINTCON0_INTEN (1 << 0)
/* VIDINTCON1 */
#define VIDINTCON1_INTFRMDONEPEND (1 << 2)
#define VIDINTCON1_INTFRMPEND (1 << 1)
#define VIDINTCON1_INTFIFOPEND (1 << 0)
/* DECON_CMU */
#define CMU_CLKGAGE_MODE_SFR_F (1 << 1)
#define CMU_CLKGAGE_MODE_MEM_F (1 << 0)
/* DECON_UPDATE */
#define STANDALONE_UPDATE_F (1 << 0)
/* DECON_VIDTCON00 */
#define VIDTCON00_VBPD_F(x) (((x) & 0xfff) << 16)
#define VIDTCON00_VFPD_F(x) ((x) & 0xfff)
/* DECON_VIDTCON01 */
#define VIDTCON01_VSPW_F(x) (((x) & 0xfff) << 16)
/* DECON_VIDTCON10 */
#define VIDTCON10_HBPD_F(x) (((x) & 0xfff) << 16)
#define VIDTCON10_HFPD_F(x) ((x) & 0xfff)
/* DECON_VIDTCON11 */
#define VIDTCON11_HSPW_F(x) (((x) & 0xfff) << 16)
/* DECON_VIDTCON2 */
#define VIDTCON2_LINEVAL(x) (((x) & 0xfff) << 16)
#define VIDTCON2_HOZVAL(x) ((x) & 0xfff)
/* TRIGCON */
#define TRIGCON_TRIGEN_PER_F (1 << 31)
#define TRIGCON_TRIGEN_F (1 << 30)
#define TRIGCON_TE_AUTO_MASK (1 << 29)
#define TRIGCON_SWTRIGCMD (1 << 1)
#define TRIGCON_SWTRIGEN (1 << 0)
#endif /* EXYNOS_REGS_DECON_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment