x86: separate generic_processor_info into its own function

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

arch/x86/kernel/mpparse_32.c

@@ -109,12 +109,91 @@ static int mpc_record;
 static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __cpuinitdata;
 #endif
 
-static void __cpuinit MP_processor_info (struct mpc_config_processor *m)
+static void __cpuinit generic_processor_info(int apicid, int version)
 {
-	int ver, apicid, cpu;
+	int cpu;
 	cpumask_t tmp_map;
 	physid_mask_t phys_cpu;
  	
+
+	/*
+	 * Validate version
+	 */
+	if (version == 0x0) {
+		printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! "
+				"fixing up to 0x10. (tell your hw vendor)\n",
+				version);
+		version = 0x10;
+	}
+	apic_version[apicid] = version;
+
+	phys_cpu = apicid_to_cpu_present(apicid);
+	physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
+
+	if (num_processors >= NR_CPUS) {
+		printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
+			"  Processor ignored.\n", NR_CPUS);
+		return;
+	}
+
+	if (num_processors >= maxcpus) {
+		printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
+			" Processor ignored.\n", maxcpus);
+		return;
+	}
+
+	num_processors++;
+	cpus_complement(tmp_map, cpu_present_map);
+	cpu = first_cpu(tmp_map);
+
+	if (apicid == boot_cpu_physical_apicid)
+		/*
+		 * x86_bios_cpu_apicid is required to have processors listed
+		 * in same order as logical cpu numbers. Hence the first
+		 * entry is BSP, and so on.
+		 */
+		cpu = 0;
+
+	/*
+	 * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
+	 * but we need to work other dependencies like SMP_SUSPEND etc
+	 * before this can be done without some confusion.
+	 * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
+	 *       - Ashok Raj <ashok.raj@intel.com>
+	 */
+	if (num_processors > 8) {
+		switch (boot_cpu_data.x86_vendor) {
+		case X86_VENDOR_INTEL:
+			if (!APIC_XAPIC(version)) {
+				def_to_bigsmp = 0;
+				break;
+			}
+			/* If P4 and above fall through */
+		case X86_VENDOR_AMD:
+			def_to_bigsmp = 1;
+		}
+	}
+#ifdef CONFIG_SMP
+	/* are we being called early in kernel startup? */
+	if (x86_cpu_to_apicid_early_ptr) {
+		u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr;
+		u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
+
+		cpu_to_apicid[cpu] = apicid;
+		bios_cpu_apicid[cpu] = apicid;
+	} else {
+		per_cpu(x86_cpu_to_apicid, cpu) = apicid;
+		per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
+	}
+#endif
+	cpu_set(cpu, cpu_possible_map);
+	cpu_set(cpu, cpu_present_map);
+}
+
+static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
+{
+	int apicid;
+
 	if (!(m->mpc_cpuflag & CPU_ENABLED)) {
 		disabled_cpus++;
 		return;
@@ -184,80 +263,7 @@ static void __cpuinit MP_processor_info (struct mpc_config_processor *m)
 		boot_cpu_physical_apicid = m->mpc_apicid;
 	}
 
-	ver = m->mpc_apicver;
-
-	/*
-	 * Validate version
-	 */
-	if (ver == 0x0) {
-		printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! "
-				"fixing up to 0x10. (tell your hw vendor)\n",
-				m->mpc_apicid);
-		ver = 0x10;
-	}
-	apic_version[m->mpc_apicid] = ver;
-
-	phys_cpu = apicid_to_cpu_present(apicid);
-	physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
-
-	if (num_processors >= NR_CPUS) {
-		printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
-			"  Processor ignored.\n", NR_CPUS);
-		return;
-	}
-
-	if (num_processors >= maxcpus) {
-		printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
-			" Processor ignored.\n", maxcpus);
-		return;
-	}
-
-	num_processors++;
-	cpus_complement(tmp_map, cpu_present_map);
-	cpu = first_cpu(tmp_map);
-
-	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR)
-		/*
-		 * x86_bios_cpu_apicid is required to have processors listed
-		 * in same order as logical cpu numbers. Hence the first
-		 * entry is BSP, and so on.
-		 */
-		cpu = 0;
-
-	/*
-	 * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
-	 * but we need to work other dependencies like SMP_SUSPEND etc
-	 * before this can be done without some confusion.
-	 * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
-	 *       - Ashok Raj <ashok.raj@intel.com>
-	 */
-	if (num_processors > 8) {
-		switch (boot_cpu_data.x86_vendor) {
-		case X86_VENDOR_INTEL:
-			if (!APIC_XAPIC(ver)) {
-				def_to_bigsmp = 0;
-				break;
-			}
-			/* If P4 and above fall through */
-		case X86_VENDOR_AMD:
-			def_to_bigsmp = 1;
-		}
-	}
-#ifdef CONFIG_SMP
-	/* are we being called early in kernel startup? */
-	if (x86_cpu_to_apicid_early_ptr) {
-		u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr;
-		u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
-
-		cpu_to_apicid[cpu] = m->mpc_apicid;
-		bios_cpu_apicid[cpu] = m->mpc_apicid;
-	} else {
-		per_cpu(x86_cpu_to_apicid, cpu) = m->mpc_apicid;
-		per_cpu(x86_bios_cpu_apicid, cpu) = m->mpc_apicid;
-	}
-#endif
-	cpu_set(cpu, cpu_possible_map);
-	cpu_set(cpu, cpu_present_map);
+	generic_processor_info(apicid, m->mpc_apicver);
 }
 
 static void __init MP_bus_info (struct mpc_config_bus *m)