Commit c8616671 authored by Stephen Boyd's avatar Stephen Boyd

Merge tag 'sunxi-clk-fixes-for-4.9' of...

Merge tag 'sunxi-clk-fixes-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-fixes

Pull Allwinner clock fixes from Maxime Ripard:

Two fixes, one for the old clock code, one for the new implementation.

* tag 'sunxi-clk-fixes-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  clk: sunxi: Fix M factor computation for APB1
  clk: sunxi-ng: sun6i-a31: Force AHB1 clock to use PLL6 as parent
parents bdfdabfe ac95330b
......@@ -191,6 +191,8 @@ static struct clk_div_table axi_div_table[] = {
static SUNXI_CCU_DIV_TABLE(axi_clk, "axi", "cpu",
0x050, 0, 3, axi_div_table, 0);
#define SUN6I_A31_AHB1_REG 0x054
static const char * const ahb1_parents[] = { "osc32k", "osc24M",
"axi", "pll-periph" };
......@@ -1230,6 +1232,16 @@ static void __init sun6i_a31_ccu_setup(struct device_node *node)
val &= BIT(16);
writel(val, reg + SUN6I_A31_PLL_MIPI_REG);
/* Force AHB1 to PLL6 / 3 */
val = readl(reg + SUN6I_A31_AHB1_REG);
/* set PLL6 pre-div = 3 */
val &= ~GENMASK(7, 6);
val |= 0x2 << 6;
/* select PLL6 / pre-div */
val &= ~GENMASK(13, 12);
val |= 0x3 << 12;
writel(val, reg + SUN6I_A31_AHB1_REG);
sunxi_ccu_probe(node, reg, &sun6i_a31_ccu_desc);
ccu_mux_notifier_register(pll_cpu_clk.common.hw.clk,
......
......@@ -373,7 +373,7 @@ static void sun4i_get_apb1_factors(struct factors_request *req)
else
calcp = 3;
calcm = (req->parent_rate >> calcp) - 1;
calcm = (div >> calcp) - 1;
req->rate = (req->parent_rate >> calcp) / (calcm + 1);
req->m = calcm;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment