Commit c887275e authored by Hidetoshi Seto's avatar Hidetoshi Seto Committed by Jesse Barnes

PCI: aerdrv: introduce is_error_source

Take core part of find_device_iter() to make a new function
is_error_source() that checks given device has report an error
or not.
Signed-off-by: default avatarHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: default avatarKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
parent 98ca3964
......@@ -126,14 +126,17 @@ static int add_error_device(struct aer_err_info *e_info, struct pci_dev *dev)
#define PCI_BUS(x) (((x) >> 8) & 0xff)
static int find_device_iter(struct pci_dev *dev, void *data)
/**
* is_error_source - check whether the device is source of reported error
* @dev: pointer to pci_dev to be checked
* @e_info: pointer to reported error info
*/
static bool is_error_source(struct pci_dev *dev, struct aer_err_info *e_info)
{
int pos;
u32 status;
u32 mask;
u32 status, mask;
u16 reg16;
int result;
struct aer_err_info *e_info = (struct aer_err_info *)data;
/*
* When bus id is equal to 0, it might be a bad id
......@@ -142,22 +145,11 @@ static int find_device_iter(struct pci_dev *dev, void *data)
if (!nosourceid && (PCI_BUS(e_info->id) != 0)) {
result = compare_device_id(dev, e_info);
if (result)
add_error_device(e_info, dev);
return true;
/*
* If there is no multiple error, we stop
* or continue based on the id comparing.
*/
/* Continue id comparing if there is no multiple error */
if (!e_info->multi_error_valid)
return result;
/*
* If there are multiple errors and id does match,
* We need continue to search other devices under
* the root port. Return 0 means that.
*/
if (result)
return 0;
return false;
}
/*
......@@ -166,50 +158,52 @@ static int find_device_iter(struct pci_dev *dev, void *data)
* 2) bus id is equal to 0. Some ports might lose the bus
* id of error source id;
* 3) There are multiple errors and prior id comparing fails;
* We check AER status registers to find the initial reporter.
* We check AER status registers to find possible reporter.
*/
if (atomic_read(&dev->enable_cnt) == 0)
return 0;
return false;
pos = pci_pcie_cap(dev);
if (!pos)
return 0;
return false;
/* Check if AER is enabled */
pci_read_config_word(dev, pos+PCI_EXP_DEVCTL, &reg16);
pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &reg16);
if (!(reg16 & (
PCI_EXP_DEVCTL_CERE |
PCI_EXP_DEVCTL_NFERE |
PCI_EXP_DEVCTL_FERE |
PCI_EXP_DEVCTL_URRE)))
return 0;
return false;
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
if (!pos)
return 0;
return false;
status = 0;
mask = 0;
/* Check if error is recorded */
if (e_info->severity == AER_CORRECTABLE) {
pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &status);
pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, &mask);
if (status & ~mask) {
add_error_device(e_info, dev);
goto added;
}
} else {
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, &mask);
if (status & ~mask) {
add_error_device(e_info, dev);
goto added;
}
}
if (status & ~mask)
return true;
return 0;
return false;
}
added:
if (e_info->multi_error_valid)
return 0;
else
return 1;
static int find_device_iter(struct pci_dev *dev, void *data)
{
struct aer_err_info *e_info = (struct aer_err_info *)data;
if (is_error_source(dev, e_info)) {
add_error_device(e_info, dev);
/* If there is only a single error, stop iteration */
if (!e_info->multi_error_valid)
return 1;
}
return 0;
}
/**
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment