Commit c88ac1df authored by Maciej W. Rozycki's avatar Maciej W. Rozycki Committed by Ingo Molnar

x86: L-APIC: Always fully configure IRQ0

Unlike the 32-bit one, the 64-bit variation of the LVT0 setup code for
the "8259A Virtual Wire" through the local APIC timer configuration does
not fully configure the relevant irq_chip structure.  Instead it relies on
the preceding I/O APIC code to have set it up, which does not happen if
the I/O APIC variants have not been tried.

The patch includes corresponding changes to the 32-bit variation too
which make them both the same, barring a small syntactic difference
involving sequence of functions in the source.  That should work as an aid
with the upcoming merge.
Signed-off-by: default avatarMaciej W. Rozycki <macro@linux-mips.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
parent 1baea6e2
......@@ -2027,7 +2027,7 @@ static inline void init_IO_APIC_traps(void)
* The local APIC irq-chip implementation:
*/
static void ack_apic(unsigned int irq)
static void ack_lapic_irq(unsigned int irq)
{
ack_APIC_irq();
}
......@@ -2052,9 +2052,17 @@ static struct irq_chip lapic_chip __read_mostly = {
.name = "local-APIC",
.mask = mask_lapic_irq,
.unmask = unmask_lapic_irq,
.ack = ack_apic,
.ack = ack_lapic_irq,
};
static void lapic_register_intr(int irq, int vector)
{
irq_desc[irq].status &= ~IRQ_LEVEL;
set_irq_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq,
"edge");
set_intr_gate(vector, interrupt[irq]);
}
static void __init setup_nmi(void)
{
/*
......@@ -2257,8 +2265,7 @@ static inline void __init check_timer(void)
printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
set_irq_chip_and_handler_name(0, &lapic_chip, handle_edge_irq,
"edge");
lapic_register_intr(0, vector);
apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
enable_8259A_irq(0);
......
......@@ -1561,7 +1561,7 @@ static inline void init_IO_APIC_traps(void)
}
}
static void enable_lapic_irq (unsigned int irq)
static void unmask_lapic_irq(unsigned int irq)
{
unsigned long v;
......@@ -1569,7 +1569,7 @@ static void enable_lapic_irq (unsigned int irq)
apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
}
static void disable_lapic_irq (unsigned int irq)
static void mask_lapic_irq(unsigned int irq)
{
unsigned long v;
......@@ -1582,19 +1582,20 @@ static void ack_lapic_irq (unsigned int irq)
ack_APIC_irq();
}
static void end_lapic_irq (unsigned int i) { /* nothing */ }
static struct hw_interrupt_type lapic_irq_type __read_mostly = {
.name = "local-APIC",
.typename = "local-APIC-edge",
.startup = NULL, /* startup_irq() not used for IRQ0 */
.shutdown = NULL, /* shutdown_irq() not used for IRQ0 */
.enable = enable_lapic_irq,
.disable = disable_lapic_irq,
.ack = ack_lapic_irq,
.end = end_lapic_irq,
static struct irq_chip lapic_chip __read_mostly = {
.name = "local-APIC",
.mask = mask_lapic_irq,
.unmask = unmask_lapic_irq,
.ack = ack_lapic_irq,
};
static void lapic_register_intr(int irq)
{
irq_desc[irq].status &= ~IRQ_LEVEL;
set_irq_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq,
"edge");
}
static void __init setup_nmi(void)
{
/*
......@@ -1784,7 +1785,7 @@ static inline void __init check_timer(void)
apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
irq_desc[0].chip = &lapic_irq_type;
lapic_register_intr(0);
apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */
enable_8259A_irq(0);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment