[PATCH] USB: speedtouch: add GPL notices

speedtouch and friends: add GPL notices (yes, the module was released by Alcatel
under the GPL) and fix some typos.

drivers/usb/misc/atmsar.c

+/******************************************************************************
+ *  atmsar.c  --  General SAR library for ATM devices.
+ *
+ *  Copyright (C) 2000, Johan Verrept
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the Free
+ *  Software Foundation; either version 2 of the License, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ *  more details.
+ *
+ *  You should have received a copy of the GNU General Public License along with
+ *  this program; if not, write to the Free Software Foundation, Inc., 59
+ *  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ ******************************************************************************/
+
 /*
- *  General SAR library for ATM devices. 
- * 
- *  Written By Johan Verrept ( Johan.Verrept@advalvas.be )
+ *  Written by Johan Verrept (Johan.Verrept@advalvas.be)
  *
- *  Copyright (c) 2000, Johan Verrept
+ *  0.2.4A:	- Version for inclusion in 2.5 series kernel
+ *		- Modifications by Richard Purdie (rpurdie@rpsys.net)
+ *		- replaced "sarlib" with "atmsar"
+ *		- adaptations for inclusion in kernel tree
  *
- *  This code falls under the GNU General Public License, see COPYING for details
+ *  0.2.4:	- Fixed wrong buffer overrun check in atmsar_decode_rawcell()
+ *		reported by Stephen Robinson <stephen.robinson@zen.co.uk>
+ *		- Fixed bug when input skb did not contain a multple of 52/53
+ *		bytes (would happen when the speedtouch device resynced)
+ *		also reported by Stephen Robinson <stephen.robinson@zen.co.uk>
  *
- *  This package is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *  
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA. 
-
-Version 0.2.4A:
-       - Version for inclusion in 2.5 series kernel
-       - Modifcations by Richard Purdie (rpurdie@rpsys.net)
- 	- replaced "sarlib" with "atmsar"
-       - adaptations for inclusion in kernel tree
-
-Version 0.2.4:
-	- Fixed wrong buffer overrun check in atmsar_decode_rawcell()
-	  reported by Stephen Robinson <stephen.robinson@zen.co.uk>
-	- Fixed bug when input skb did not contain a multple of 52/53 bytes.
-	  (would happen when the speedtouch device resynced)
-	  also reported by Stephen Robinson <stephen.robinson@zen.co.uk>
-
-Version 0.2.3:
-	- Fixed wrong allocation size. caused memory corruption in some
-	  cases. Reported by Vladimir Dergachev <volodya@mindspring.com>
-	- Added some comments
-
-Version 0.2.2:
-	- Fixed CRCASM (patch from Linus Flannagan <linusf@netservices.eng.net>)
-	- Fixed problem when user did NOT use the ATMSAR_USE_53BYTE_CELL flag.
-          (reported by  Piers Scannell <email@lot105.com> )
-	- No more in-buffer rewriting for cloned buffers.
-	- Removed the PII specific CFLAGS in the Makefile.
-
-Version 0.2.1:
-	- removed dependancy on alloc_tx. tis presented problems when using
-		this with the  br2684 code.
-
-Version 0.2:
-        - added AAL0 reassembly
-        - added alloc_tx support                  
-        - replaced alloc_skb in decode functions to dev_alloc_skb to allow
-                 calling from interrupt
-        - fixed embarassing AAL5 bug. I was setting the pti bit in the wrong
-                byte...
-        - fixed another emabrassing bug.. picked up the wrong crc type and
-                forgot to invert the crc result...
-        - fixed AAL5 length calculations.
-        - removed automatic skb freeing from encode functions.
-                This caused problems because i did kfree_skb it, while it
-                needed to be popped. I cannot determine though whether it
-                needs to be popped or not. Figu'e it out ye'self ;-)
-        - added mru field. This is the buffersize. atmsar_decode_aal0 will
-                use when it allocates a receive buffer. A stop gap for real
-		buffer management.
-
-Version 0.1:
-	- library created.
-	- only contains AAL5, AAL0 can be easily added. ( actually, only
-		AAL0 reassembly is missing)
-*/
+ *  0.2.3:	- Fixed wrong allocation size. caused memory corruption in some
+ *		cases. Reported by Vladimir Dergachev <volodya@mindspring.com>
+ *		- Added some comments
+ *
+ *  0.2.2:	- Fixed CRCASM
+ *		patch from Linus Flannagan <linusf@netservices.eng.net>
+ *		- Fixed problem when user did NOT use the
+ *		ATMSAR_USE_53BYTE_CELL flag.
+ *		reported by  Piers Scannell <email@lot105.com>
+ *		- No more in-buffer rewriting for cloned buffers.
+ *		- Removed the PII specific CFLAGS in the Makefile.
+ *
+ *  0.2.1:	- removed dependancy on alloc_tx. tis presented problems when
+ *		using this with the br2684 code.
+ *
+ *  0.2:	- added AAL0 reassembly
+ *		- added alloc_tx support
+ *		- replaced alloc_skb in decode functions to dev_alloc_skb to
+ *		allow calling from interrupt
+ *		- fixed embarassing AAL5 bug. I was setting the pti bit in the
+ *		wrong byte...
+ *		- fixed another emabrassing bug.. picked up the wrong crc type
+ *		and forgot to invert the crc result...
+ *		- fixed AAL5 length calculations.
+ *		- removed automatic skb freeing from encode functions.
+ *		This caused problems because i did kfree_skb it, while it
+ *		needed to be popped. I cannot determine though whether it
+ *		needs to be popped or not. Figu'e it out ye'self ;-)
+ *		- added mru field. This is the buffersize. atmsar_decode_aal0
+ *		will use when it allocates a receive buffer. A stop gap for
+ *		real buffer management.
+ *
+ *  0.1:	- library created.
+ *		- only contains AAL5, AAL0 can be easily added. (actually, only
+ *		AAL0 reassembly is missing)
+ *
+ */
 
 #include "atmsar.h"
 
@@ -214,7 +216,7 @@ unsigned long calc_crc (char *mem, int len, unsigned initial)
 
 #define crc32( crc, mem, len) calc_crc(mem, len, crc);
 
-/* initialiation routines. not used at the moment 
+/* initialization routines. not used at the moment
  * I will avoid these as long as possible !!
  */
 
@@ -296,7 +298,7 @@ struct atmsar_vcc_data *atmsar_open (struct atmsar_vcc_data **list, struct atm_v
 /*
  * This gives problems with the ATM layer alloc_tx().
  * It is not usable from interrupt context and for
- * some reason this is used in interurpt context 
+ * some reason this is used in interrupt context
  * with br2684.c
  *
   if (vcc->alloc_tx)
@@ -581,7 +583,7 @@ struct sk_buff *atmsar_decode_rawcell (struct atmsar_vcc_data *list, struct sk_b
 					vcc->reasBuffer = dev_alloc_skb (vcc->mtu);
 
 				/* if alloc fails, we just drop the cell. it is possible that we can still
-				 * receive cells on other vcc's 
+				 * receive cells on other vcc's
 				 */
 				if (vcc->reasBuffer) {
 					/* if (buffer overrun) discard received cells until now */

drivers/usb/misc/atmsar.h

-/*
+#ifndef _ATMSAR_H_
+#define _ATMSAR_H_
+
+/******************************************************************************
+ *  atmsar.h  --  General SAR library for ATM devices.
  *
- *  General SAR library for ATM devices.
+ *  Copyright (C) 2000, Johan Verrept
  *
- *  Copyright (c) 2000, Johan Verrept
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the Free
+ *  Software Foundation; either version 2 of the License, or (at your option)
+ *  any later version.
  *
- *  This code falls under the GNU General Public License, see COPYING for details.
+ *  This program is distributed in the hope that it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ *  more details.
  *
- */
-
-#ifndef _ATMSAR_H_
-#define _ATMSAR_H_
+ *  You should have received a copy of the GNU General Public License along with
+ *  this program; if not, write to the Free Software Foundation, Inc., 59
+ *  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ ******************************************************************************/
 
 #include <linux/kernel.h>
 #include <linux/proc_fs.h>

drivers/usb/misc/speedtouch.c

+/******************************************************************************
+ *  speedtouch.c  --  Alcatel SpeedTouch USB xDSL modem driver.
+ *
+ *  Copyright (C) 2001, Alcatel
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the Free
+ *  Software Foundation; either version 2 of the License, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ *  more details.
+ *
+ *  You should have received a copy of the GNU General Public License along with
+ *  this program; if not, write to the Free Software Foundation, Inc., 59
+ *  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ ******************************************************************************/
+
 /*
- *  Driver Module for Alcatel SpeedTouch USB xDSL modem
- *  Copyright 2001, Alcatel
  *  Written by Johan Verrept (Johan.Verrept@advalvas.be)
  *
-
-1.5A:   - Version for inclusion in 2.5 series kernel
-        - Modifcations by Richard Purdie (rpurdie@rpsys.net)
-        - made compatible with kernel 2.5.6 onwards by changing
-	  udsl_usb_send_data_context->urb changed to a pointer 
-	  and adding code to alloc and free it
-        - remove_wait_queue() added to udsl_atm_processqueue_thread() 
-
-1.5:	- fixed memory leak when atmsar_decode_aal5 returned NULL.
-	 (reported by stephen.robinson@zen.co.uk)
-
-1.4:	- changed the spin_lock() under interrupt to spin_lock_irqsave()
-	- unlink all active send urbs of a vcc that is being closed.
-
-1.3.1:	- added the version number
-
-1.3:	- Added multiple send urb support
-	- fixed memory leak and vcc->tx_inuse starvation bug
-	  when not enough memory left in vcc.
-
-1.2:	- Fixed race condition in udsl_usb_send_data()
-1.1:	- Turned off packet debugging
- 
+ *  1.5A:	- Version for inclusion in 2.5 series kernel
+ *		- Modifications by Richard Purdie (rpurdie@rpsys.net)
+ *		- made compatible with kernel 2.5.6 onwards by changing
+ *		udsl_usb_send_data_context->urb to a pointer and adding code
+ *		to alloc and free it
+ *		- remove_wait_queue() added to udsl_atm_processqueue_thread()
+ *
+ *  1.5:	- fixed memory leak when atmsar_decode_aal5 returned NULL.
+ *		(reported by stephen.robinson@zen.co.uk)
+ *
+ *  1.4:	- changed the spin_lock() under interrupt to spin_lock_irqsave()
+ *		- unlink all active send urbs of a vcc that is being closed.
+ *
+ *  1.3.1:	- added the version number
+ *
+ *  1.3:	- Added multiple send urb support
+ *		- fixed memory leak and vcc->tx_inuse starvation bug
+ *		  when not enough memory left in vcc.
+ *
+ *  1.2:	- Fixed race condition in udsl_usb_send_data()
+ *  1.1:	- Turned off packet debugging
+ *
  */
 
 #include <linux/module.h>
@@ -734,7 +752,7 @@ void udsl_usb_data_receive (struct urb *urb, struct pt_regs *regs)
 	case -ENOENT:		/* buffer was unlinked */
 	case -EILSEQ:		/* unplug or timeout */
 	case -ETIMEDOUT:	/* unplug or timeout */
-		/* 
+		/*
 		 * we don't do anything here and we don't resubmit
 		 */
 		return;
@@ -1033,7 +1051,7 @@ module_exit(udsl_usb_cleanup);
 #ifdef DEBUG_PACKET
 /*******************************************************************************
 *
-* Debug 
+* Debug
 *
 *******************************************************************************/