Commit c96fbdd0 authored by Jean-Christophe PLAGNIOL-VILLARD's avatar Jean-Christophe PLAGNIOL-VILLARD Committed by Greg Kroah-Hartman

USB: ftdi_sio: add Calao reference board support

Calao use on there dev kits a FT2232 where the port 0 is used for the JTAG and
port 1 for the UART

They use the same VID and PID as FTDI Chip but they program the manufacturer
name in the eeprom

So use this information to detect it
Signed-off-by: default avatarJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 6118514e
......@@ -101,6 +101,7 @@ static int ftdi_jtag_probe(struct usb_serial *serial);
static int ftdi_mtxorb_hack_setup(struct usb_serial *serial);
static int ftdi_NDI_device_setup(struct usb_serial *serial);
static int ftdi_stmclite_probe(struct usb_serial *serial);
static int ftdi_8u2232c_probe(struct usb_serial *serial);
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv);
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
......@@ -128,6 +129,10 @@ static struct ftdi_sio_quirk ftdi_stmclite_quirk = {
.probe = ftdi_stmclite_probe,
};
static struct ftdi_sio_quirk ftdi_8u2232c_quirk = {
.probe = ftdi_8u2232c_probe,
};
/*
* The 8U232AM has the same API as the sio except for:
* - it can support MUCH higher baudrates; up to:
......@@ -178,7 +183,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) ,
.driver_info = (kernel_ulong_t)&ftdi_8u2232c_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_232H_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
......@@ -1737,6 +1743,18 @@ static int ftdi_jtag_probe(struct usb_serial *serial)
return 0;
}
static int ftdi_8u2232c_probe(struct usb_serial *serial)
{
struct usb_device *udev = serial->dev;
dbg("%s", __func__);
if (strcmp(udev->manufacturer, "CALAO Systems") == 0)
return ftdi_jtag_probe(serial);
return 0;
}
/*
* First and second port on STMCLiteadaptors is reserved for JTAG interface
* and the forth port for pio
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment