Commit c9a221b2 authored by Stanislaw Gruszka's avatar Stanislaw Gruszka Committed by John W. Linville

rt2800: move 30xx common rf init code

Acked-by: default avatarGertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: default avatarStanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent f9cdcbb1
......@@ -4478,6 +4478,10 @@ static void rt2800_init_rfcsr_305x_soc(struct rt2x00_dev *rt2x00dev)
static void rt2800_init_rfcsr_30xx(struct rt2x00_dev *rt2x00dev)
{
u8 rfcsr;
u16 eeprom;
u32 reg;
/* XXX vendor driver do this only for 3070 */
rt2800_rf_init_calibration(rt2x00dev, 30);
......@@ -4500,6 +4504,36 @@ static void rt2800_init_rfcsr_30xx(struct rt2x00_dev *rt2x00dev)
rt2800_rfcsr_write(rt2x00dev, 24, 0x16);
rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
rt2800_rfcsr_write(rt2x00dev, 29, 0x1f);
if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) {
rt2800_register_read(rt2x00dev, LDO_CFG0, &reg);
rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 3);
rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
} else if (rt2x00_rt(rt2x00dev, RT3071) ||
rt2x00_rt(rt2x00dev, RT3090)) {
rt2800_rfcsr_write(rt2x00dev, 31, 0x14);
rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1);
rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
rt2800_register_read(rt2x00dev, LDO_CFG0, &reg);
rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E)) {
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_DAC_TEST))
rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 3);
else
rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 0);
}
rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
rt2800_register_read(rt2x00dev, GPIO_SWITCH, &reg);
rt2x00_set_field32(&reg, GPIO_SWITCH_5, 0);
rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
}
}
static void rt2800_init_rfcsr_3290(struct rt2x00_dev *rt2x00dev)
......@@ -4954,35 +4988,8 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
return 0;
}
if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) {
rt2800_register_read(rt2x00dev, LDO_CFG0, &reg);
rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 3);
rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
} else if (rt2x00_rt(rt2x00dev, RT3071) ||
rt2x00_rt(rt2x00dev, RT3090)) {
rt2800_rfcsr_write(rt2x00dev, 31, 0x14);
rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1);
rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
rt2800_register_read(rt2x00dev, LDO_CFG0, &reg);
rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E)) {
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_DAC_TEST))
rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 3);
else
rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 0);
}
rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
rt2800_register_read(rt2x00dev, GPIO_SWITCH, &reg);
rt2x00_set_field32(&reg, GPIO_SWITCH_5, 0);
rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
} else if (rt2x00_rt(rt2x00dev, RT3390)) {
if (rt2x00_rt(rt2x00dev, RT3390)) {
rt2800_register_read(rt2x00dev, GPIO_SWITCH, &reg);
rt2x00_set_field32(&reg, GPIO_SWITCH_5, 0);
rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment