Commit ca295e50 authored by Dave Airlie's avatar Dave Airlie

Merge branch 'drm-nouveau-fixes' of...

Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes

* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nouveau: fix assumption that semaphore dmaobj is valid in x-chan sync
  drm/nv50/disp: fix gamma with page flipping overlay turned on
  drm/nouveau/pm: Prevent overflow in nouveau_perf_init()
  drm/nouveau: fix big-endian switch
parents 682f1a54 b16a5a18
......@@ -339,11 +339,12 @@ semaphore_acquire(struct nouveau_channel *chan, struct nouveau_semaphore *sema)
int ret;
if (dev_priv->chipset < 0x84) {
ret = RING_SPACE(chan, 3);
ret = RING_SPACE(chan, 4);
if (ret)
return ret;
BEGIN_RING(chan, NvSubSw, NV_SW_SEMAPHORE_OFFSET, 2);
BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 3);
OUT_RING (chan, NvSema);
OUT_RING (chan, sema->mem->start);
OUT_RING (chan, 1);
} else
......@@ -351,10 +352,12 @@ semaphore_acquire(struct nouveau_channel *chan, struct nouveau_semaphore *sema)
struct nouveau_vma *vma = &dev_priv->fence.bo->vma;
u64 offset = vma->offset + sema->mem->start;
ret = RING_SPACE(chan, 5);
ret = RING_SPACE(chan, 7);
if (ret)
return ret;
BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1);
OUT_RING (chan, chan->vram_handle);
BEGIN_RING(chan, NvSubSw, 0x0010, 4);
OUT_RING (chan, upper_32_bits(offset));
OUT_RING (chan, lower_32_bits(offset));
......@@ -394,11 +397,12 @@ semaphore_release(struct nouveau_channel *chan, struct nouveau_semaphore *sema)
int ret;
if (dev_priv->chipset < 0x84) {
ret = RING_SPACE(chan, 4);
ret = RING_SPACE(chan, 5);
if (ret)
return ret;
BEGIN_RING(chan, NvSubSw, NV_SW_SEMAPHORE_OFFSET, 1);
BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 2);
OUT_RING (chan, NvSema);
OUT_RING (chan, sema->mem->start);
BEGIN_RING(chan, NvSubSw, NV_SW_SEMAPHORE_RELEASE, 1);
OUT_RING (chan, 1);
......@@ -407,10 +411,12 @@ semaphore_release(struct nouveau_channel *chan, struct nouveau_semaphore *sema)
struct nouveau_vma *vma = &dev_priv->fence.bo->vma;
u64 offset = vma->offset + sema->mem->start;
ret = RING_SPACE(chan, 5);
ret = RING_SPACE(chan, 7);
if (ret)
return ret;
BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1);
OUT_RING (chan, chan->vram_handle);
BEGIN_RING(chan, NvSubSw, 0x0010, 4);
OUT_RING (chan, upper_32_bits(offset));
OUT_RING (chan, lower_32_bits(offset));
......@@ -504,22 +510,22 @@ nouveau_fence_channel_init(struct nouveau_channel *chan)
struct nouveau_gpuobj *obj = NULL;
int ret;
if (dev_priv->card_type >= NV_C0)
goto out_initialised;
if (dev_priv->card_type < NV_C0) {
/* Create an NV_SW object for various sync purposes */
ret = nouveau_gpuobj_gr_new(chan, NvSw, NV_SW);
if (ret)
return ret;
/* Create an NV_SW object for various sync purposes */
ret = nouveau_gpuobj_gr_new(chan, NvSw, NV_SW);
if (ret)
return ret;
ret = RING_SPACE(chan, 2);
if (ret)
return ret;
/* we leave subchannel empty for nvc0 */
ret = RING_SPACE(chan, 2);
if (ret)
return ret;
BEGIN_RING(chan, NvSubSw, 0, 1);
OUT_RING(chan, NvSw);
BEGIN_RING(chan, NvSubSw, 0, 1);
OUT_RING (chan, NvSw);
FIRE_RING (chan);
}
/* Create a DMA object for the shared cross-channel sync area. */
/* Setup area of memory shared between all channels for x-chan sync */
if (USE_SEMA(dev) && dev_priv->chipset < 0x84) {
struct ttm_mem_reg *mem = &dev_priv->fence.bo->bo.mem;
......@@ -534,23 +540,8 @@ nouveau_fence_channel_init(struct nouveau_channel *chan)
nouveau_gpuobj_ref(NULL, &obj);
if (ret)
return ret;
ret = RING_SPACE(chan, 2);
if (ret)
return ret;
BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1);
OUT_RING(chan, NvSema);
} else {
ret = RING_SPACE(chan, 2);
if (ret)
return ret;
BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1);
OUT_RING (chan, chan->vram_handle); /* whole VM */
}
FIRE_RING(chan);
out_initialised:
INIT_LIST_HEAD(&chan->fence.pending);
spin_lock_init(&chan->fence.lock);
atomic_set(&chan->fence.last_sequence_irq, 0);
......
......@@ -182,6 +182,11 @@ nouveau_perf_init(struct drm_device *dev)
entries = perf[2];
}
if (entries > NOUVEAU_PM_MAX_LEVEL) {
NV_DEBUG(dev, "perf table has too many entries - buggy vbios?\n");
entries = NOUVEAU_PM_MAX_LEVEL;
}
entry = perf + headerlen;
for (i = 0; i < entries; i++) {
struct nouveau_pm_level *perflvl = &pm->perflvl[pm->nr_perflvl];
......
......@@ -881,8 +881,8 @@ int nouveau_load(struct drm_device *dev, unsigned long flags)
#ifdef __BIG_ENDIAN
/* Put the card in BE mode if it's not */
if (nv_rd32(dev, NV03_PMC_BOOT_1))
nv_wr32(dev, NV03_PMC_BOOT_1, 0x00000001);
if (nv_rd32(dev, NV03_PMC_BOOT_1) != 0x01000001)
nv_wr32(dev, NV03_PMC_BOOT_1, 0x01000001);
DRM_MEMORYBARRIER();
#endif
......
......@@ -409,7 +409,7 @@ nv50_display_flip_next(struct drm_crtc *crtc, struct drm_framebuffer *fb,
struct nouveau_channel *evo = dispc->sync;
int ret;
ret = RING_SPACE(evo, 24);
ret = RING_SPACE(evo, chan ? 25 : 27);
if (unlikely(ret))
return ret;
......@@ -458,8 +458,19 @@ nv50_display_flip_next(struct drm_crtc *crtc, struct drm_framebuffer *fb,
/* queue the flip on the crtc's "display sync" channel */
BEGIN_RING(evo, 0, 0x0100, 1);
OUT_RING (evo, 0xfffe0000);
BEGIN_RING(evo, 0, 0x0084, 5);
OUT_RING (evo, chan ? 0x00000100 : 0x00000010);
if (chan) {
BEGIN_RING(evo, 0, 0x0084, 1);
OUT_RING (evo, 0x00000100);
} else {
BEGIN_RING(evo, 0, 0x0084, 1);
OUT_RING (evo, 0x00000010);
/* allows gamma somehow, PDISP will bitch at you if
* you don't wait for vblank before changing this..
*/
BEGIN_RING(evo, 0, 0x00e0, 1);
OUT_RING (evo, 0x40000000);
}
BEGIN_RING(evo, 0, 0x0088, 4);
OUT_RING (evo, dispc->sem.offset);
OUT_RING (evo, 0xf00d0000 | dispc->sem.value);
OUT_RING (evo, 0x74b1e000);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment