net: phy: realtek: use new PHYID matching macros

Use new macros for PHYID matching to avoid boilerplate code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/realtek.c

@@ -213,14 +213,12 @@ static int rtl8366rb_config_init(struct phy_device *phydev)
 
 static struct phy_driver realtek_drvs[] = {
 	{
-		.phy_id         = 0x00008201,
+		PHY_ID_MATCH_EXACT(0x00008201),
 		.name           = "RTL8201CP Ethernet",
-		.phy_id_mask    = 0x0000ffff,
 		.features       = PHY_BASIC_FEATURES,
 	}, {
-		.phy_id		= 0x001cc816,
+		PHY_ID_MATCH_EXACT(0x001cc816),
 		.name		= "RTL8201F Fast Ethernet",
-		.phy_id_mask	= 0x001fffff,
 		.features	= PHY_BASIC_FEATURES,
 		.ack_interrupt	= &rtl8201_ack_interrupt,
 		.config_intr	= &rtl8201_config_intr,
@@ -229,17 +227,15 @@ static struct phy_driver realtek_drvs[] = {
 		.read_page	= rtl821x_read_page,
 		.write_page	= rtl821x_write_page,
 	}, {
-		.phy_id		= 0x001cc910,
+		PHY_ID_MATCH_EXACT(0x001cc910),
 		.name		= "RTL8211 Gigabit Ethernet",
-		.phy_id_mask	= 0x001fffff,
 		.features	= PHY_GBIT_FEATURES,
 		.config_aneg	= rtl8211_config_aneg,
 		.read_mmd	= &genphy_read_mmd_unsupported,
 		.write_mmd	= &genphy_write_mmd_unsupported,
 	}, {
-		.phy_id		= 0x001cc912,
+		PHY_ID_MATCH_EXACT(0x001cc912),
 		.name		= "RTL8211B Gigabit Ethernet",
-		.phy_id_mask	= 0x001fffff,
 		.features	= PHY_GBIT_FEATURES,
 		.ack_interrupt	= &rtl821x_ack_interrupt,
 		.config_intr	= &rtl8211b_config_intr,
@@ -248,35 +244,31 @@ static struct phy_driver realtek_drvs[] = {
 		.suspend	= rtl8211b_suspend,
 		.resume		= rtl8211b_resume,
 	}, {
-		.phy_id		= 0x001cc913,
+		PHY_ID_MATCH_EXACT(0x001cc913),
 		.name		= "RTL8211C Gigabit Ethernet",
-		.phy_id_mask	= 0x001fffff,
 		.features	= PHY_GBIT_FEATURES,
 		.config_init	= rtl8211c_config_init,
 		.read_mmd	= &genphy_read_mmd_unsupported,
 		.write_mmd	= &genphy_write_mmd_unsupported,
 	}, {
-		.phy_id		= 0x001cc914,
+		PHY_ID_MATCH_EXACT(0x001cc914),
 		.name		= "RTL8211DN Gigabit Ethernet",
-		.phy_id_mask	= 0x001fffff,
 		.features	= PHY_GBIT_FEATURES,
 		.ack_interrupt	= rtl821x_ack_interrupt,
 		.config_intr	= rtl8211e_config_intr,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
 	}, {
-		.phy_id		= 0x001cc915,
+		PHY_ID_MATCH_EXACT(0x001cc915),
 		.name		= "RTL8211E Gigabit Ethernet",
-		.phy_id_mask	= 0x001fffff,
 		.features	= PHY_GBIT_FEATURES,
 		.ack_interrupt	= &rtl821x_ack_interrupt,
 		.config_intr	= &rtl8211e_config_intr,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
 	}, {
-		.phy_id		= 0x001cc916,
+		PHY_ID_MATCH_EXACT(0x001cc916),
 		.name		= "RTL8211F Gigabit Ethernet",
-		.phy_id_mask	= 0x001fffff,
 		.features	= PHY_GBIT_FEATURES,
 		.config_init	= &rtl8211f_config_init,
 		.ack_interrupt	= &rtl8211f_ack_interrupt,
@@ -286,9 +278,8 @@ static struct phy_driver realtek_drvs[] = {
 		.read_page	= rtl821x_read_page,
 		.write_page	= rtl821x_write_page,
 	}, {
-		.phy_id		= 0x001cc961,
+		PHY_ID_MATCH_EXACT(0x001cc961),
 		.name		= "RTL8366RB Gigabit Ethernet",
-		.phy_id_mask	= 0x001fffff,
 		.features	= PHY_GBIT_FEATURES,
 		.config_init	= &rtl8366rb_config_init,
 		.suspend	= genphy_suspend,
@@ -299,7 +290,7 @@ static struct phy_driver realtek_drvs[] = {
 module_phy_driver(realtek_drvs);
 
 static const struct mdio_device_id __maybe_unused realtek_tbl[] = {
-	{ 0x001cc800, GENMASK(31, 10) },
+	{ PHY_ID_MATCH_VENDOR(0x001cc800) },
 	{ }
 };