Commit ca6349a8 authored by Songjun Wu's avatar Songjun Wu Committed by Alexandre Belloni

ARM: at91/dt: sama5d2 Xplained: add pdmic node

Add pdmic node on sama5d2-xplained board.The pdmic
pins conflict with ISC_D0 & ISC_D1 data pins.
Signed-off-by: default avatarSongjun Wu <songjun.wu@atmel.com>
Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
parent 70450d4d
...@@ -119,6 +119,16 @@ macb0: ethernet@f8008000 { ...@@ -119,6 +119,16 @@ macb0: ethernet@f8008000 {
status = "okay"; status = "okay";
}; };
pdmic@f8018000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pdmic_default>;
atmel,model = "PDMIC @ sama5d2_xplained";
atmel,mic-min-freq = <1000000>;
atmel,mic-max-freq = <3246000>;
atmel,mic-offset = <0x0>;
status = "okay";
};
uart1: serial@f8020000 { uart1: serial@f8020000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_default>; pinctrl-0 = <&pinctrl_uart1_default>;
...@@ -289,6 +299,12 @@ pinctrl_macb0_default: macb0_default { ...@@ -289,6 +299,12 @@ pinctrl_macb0_default: macb0_default {
bias-disable; bias-disable;
}; };
pinctrl_pdmic_default: pdmic_default {
pinmux = <PIN_PB26__PDMIC_DAT>,
<PIN_PB27__PDMIC_CLK>;
bias-disable;
};
pinctrl_sdmmc0_default: sdmmc0_default { pinctrl_sdmmc0_default: sdmmc0_default {
cmd_data { cmd_data {
pinmux = <PIN_PA1__SDMMC0_CMD>, pinmux = <PIN_PA1__SDMMC0_CMD>,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment