ARM: OMAP2+: Remove unused ti81xx platform init code

The support for 81xx was never working in mainline, and the broken
legacy booting support has been removed. There are patches coming
to make 81xx boot with device tree, and for that we won't need any
of this legacy platform code, so let's just remove it.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/cclock3xxx_data.c

@@ -3634,10 +3634,6 @@ int __init omap3xxx_clk_init(void)
 		omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks,
 				     ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks));
 		omap_clocks_register(omap3xxx_clks, ARRAY_SIZE(omap3xxx_clks));
-	} else if (soc_is_am33xx()) {
-		cpu_mask = RATE_IN_AM33XX;
-	} else if (cpu_is_ti814x()) {
-		cpu_mask = RATE_IN_TI814X;
 	} else if (cpu_is_omap34xx()) {
 		if (omap_rev() == OMAP3430_REV_ES1_0) {
 			cpu_mask = RATE_IN_3430ES1;
@@ -3681,7 +3677,7 @@ int __init omap3xxx_clk_init(void)
 	 * Lock DPLL5 -- here only until other device init code can
 	 * handle this
 	 */
-	if (!cpu_is_ti81xx() && (omap_rev() >= OMAP3430_REV_ES2_0))
+	if (omap_rev() >= OMAP3430_REV_ES2_0)
 		omap3_clk_lock_dpll5();
 
 	/* Avoid sleeping during omap3_core_dpll_m2_set_rate() */

arch/arm/mach-omap2/omap_phy_internal.c

@@ -152,38 +152,3 @@ void am35x_set_mode(u8 musb_mode)
 
 	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
 }
-
-void ti81xx_musb_phy_power(u8 on)
-{
-	void __iomem *scm_base = NULL;
-	u32 usbphycfg;
-
-	scm_base = ioremap(TI81XX_SCM_BASE, SZ_2K);
-	if (!scm_base) {
-		pr_err("system control module ioremap failed\n");
-		return;
-	}
-
-	usbphycfg = readl_relaxed(scm_base + USBCTRL0);
-
-	if (on) {
-		if (cpu_is_ti816x()) {
-			usbphycfg |= TI816X_USBPHY0_NORMAL_MODE;
-			usbphycfg &= ~TI816X_USBPHY_REFCLK_OSC;
-		} else if (cpu_is_ti814x()) {
-			usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN
-				| USBPHY_DPINPUT | USBPHY_DMINPUT);
-			usbphycfg |= (USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN
-				| USBPHY_DPOPBUFCTL | USBPHY_DMOPBUFCTL);
-		}
-	} else {
-		if (cpu_is_ti816x())
-			usbphycfg &= ~TI816X_USBPHY0_NORMAL_MODE;
-		else if (cpu_is_ti814x())
-			usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
-
-	}
-	writel_relaxed(usbphycfg, scm_base + USBCTRL0);
-
-	iounmap(scm_base);
-}

arch/arm/mach-omap2/usb-musb.c

@@ -82,16 +82,8 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
 	musb_plat.mode = board_data->mode;
 	musb_plat.extvbus = board_data->extvbus;
 
-	if (soc_is_am35xx()) {
-		oh_name = "am35x_otg_hs";
-		name = "musb-am35x";
-	} else if (cpu_is_ti81xx()) {
-		oh_name = "usb_otg_hs";
-		name = "musb-ti81xx";
-	} else {
-		oh_name = "usb_otg_hs";
-		name = "musb-omap2430";
-	}
+	oh_name = "usb_otg_hs";
+	name = "musb-omap2430";
 
         oh = omap_hwmod_lookup(oh_name);
         if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",

arch/arm/mach-omap2/usb.h

@@ -68,5 +68,3 @@ extern void am35x_musb_reset(void);
 extern void am35x_musb_phy_power(u8 on);
 extern void am35x_musb_clear_irq(void);
 extern void am35x_set_mode(u8 musb_mode);
-extern void ti81xx_musb_phy_power(u8 on);
-