drm/amd/display: Update phantom pipe enable / disable sequence
Previously we would call apply_ctx_to_hw to enable and disable phantom pipes. However, apply_ctx_to_hw can potentially update non-phantom pipes as well which is undesired. Instead of calling apply_ctx_to_hw as a whole, call the relevant helpers for each phantom pipe when enabling / disabling which will avoid us modifying hardware state for non-phantom pipes unknowingly. The use case is for an FRL display where FRL_Update is requested by the display. In this case link_state_valid flag is cleared in a passive callback thread and should be handled in the next stream / link update. However, due to the call to apply_ctx_to_hw for the phantom pipes during a flip, the main pipes were modified outside of the desired sequence (driver does not handle link_state_valid = 0 on flips). Cc: stable@vger.kernel.org # 6.6+ Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Showing
Please register or sign in to comment