cnic: Reset iSCSI EQ during shutdown.

Without the reset, reloading the cnic driver can cause the iSCSI
Event Queue to be out of sync with the driver and cause intermittent
crash.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h

@@ -23,6 +23,11 @@
 	(IRO[159].base + ((funcId) * IRO[159].m1))
 #define CSTORM_FUNC_EN_OFFSET(funcId) \
 	(IRO[149].base + ((funcId) * IRO[149].m1))
+#define CSTORM_HC_SYNC_LINE_INDEX_E1X_OFFSET(hcIndex, sbId) \
+	(IRO[139].base + ((hcIndex) * IRO[139].m1) + ((sbId) * IRO[139].m2))
+#define CSTORM_HC_SYNC_LINE_INDEX_E2_OFFSET(hcIndex, sbId) \
+	(IRO[138].base + (((hcIndex)>>2) * IRO[138].m1) + (((hcIndex)&3) \
+	* IRO[138].m2) + ((sbId) * IRO[138].m3))
 #define CSTORM_IGU_MODE_OFFSET (IRO[157].base)
 #define CSTORM_ISCSI_CQ_SIZE_OFFSET(pfId) \
 	(IRO[316].base + ((pfId) * IRO[316].m1))

drivers/net/ethernet/broadcom/cnic.c

@@ -5344,8 +5344,27 @@ static void cnic_stop_bnx2_hw(struct cnic_dev *dev)
 static void cnic_stop_bnx2x_hw(struct cnic_dev *dev)
 {
 	struct cnic_local *cp = dev->cnic_priv;
+	u32 hc_index = HC_INDEX_ISCSI_EQ_CONS;
+	u32 sb_id = cp->status_blk_num;
+	u32 idx_off, syn_off;
 
 	cnic_free_irq(dev);
+
+	if (BNX2X_CHIP_IS_E2_PLUS(cp->chip_id)) {
+		idx_off = offsetof(struct hc_status_block_e2, index_values) +
+			  (hc_index * sizeof(u16));
+
+		syn_off = CSTORM_HC_SYNC_LINE_INDEX_E2_OFFSET(hc_index, sb_id);
+	} else {
+		idx_off = offsetof(struct hc_status_block_e1x, index_values) +
+			  (hc_index * sizeof(u16));
+
+		syn_off = CSTORM_HC_SYNC_LINE_INDEX_E1X_OFFSET(hc_index, sb_id);
+	}
+	CNIC_WR16(dev, BAR_CSTRORM_INTMEM + syn_off, 0);
+	CNIC_WR16(dev, BAR_CSTRORM_INTMEM + CSTORM_STATUS_BLOCK_OFFSET(sb_id) +
+		  idx_off, 0);
+
 	*cp->kcq1.hw_prod_idx_ptr = 0;
 	CNIC_WR(dev, BAR_CSTRORM_INTMEM +
 		CSTORM_ISCSI_EQ_CONS_OFFSET(cp->pfid, 0), 0);