Commit caad9004 authored by Sean Nyekjaer's avatar Sean Nyekjaer Committed by Greg Kroah-Hartman

can: mcp251x: add support for mcp25625

[ Upstream commit 35b7fa4d ]

Fully compatible with mcp2515, the mcp25625 have integrated transceiver.

This patch adds support for the mcp25625 to the existing mcp251x driver.
Signed-off-by: default avatarSean Nyekjaer <sean@geanix.com>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
parent 7b9e3c98
......@@ -8,9 +8,10 @@ config CAN_HI311X
Driver for the Holt HI311x SPI CAN controllers.
config CAN_MCP251X
tristate "Microchip MCP251x SPI CAN controllers"
tristate "Microchip MCP251x and MCP25625 SPI CAN controllers"
depends on HAS_DMA
---help---
Driver for the Microchip MCP251x SPI CAN controllers.
Driver for the Microchip MCP251x and MCP25625 SPI CAN
controllers.
endmenu
/*
* CAN bus driver for Microchip 251x CAN Controller with SPI Interface
* CAN bus driver for Microchip 251x/25625 CAN Controller with SPI Interface
*
* MCP2510 support and bug fixes by Christian Pellegrin
* <chripell@evolware.org>
......@@ -41,7 +41,7 @@
* static struct spi_board_info spi_board_info[] = {
* {
* .modalias = "mcp2510",
* // or "mcp2515" depending on your controller
* // "mcp2515" or "mcp25625" depending on your controller
* .platform_data = &mcp251x_info,
* .irq = IRQ_EINT13,
* .max_speed_hz = 2*1000*1000,
......@@ -238,6 +238,7 @@ static const struct can_bittiming_const mcp251x_bittiming_const = {
enum mcp251x_model {
CAN_MCP251X_MCP2510 = 0x2510,
CAN_MCP251X_MCP2515 = 0x2515,
CAN_MCP251X_MCP25625 = 0x25625,
};
struct mcp251x_priv {
......@@ -280,7 +281,6 @@ static inline int mcp251x_is_##_model(struct spi_device *spi) \
}
MCP251X_IS(2510);
MCP251X_IS(2515);
static void mcp251x_clean(struct net_device *net)
{
......@@ -639,7 +639,7 @@ static int mcp251x_hw_reset(struct spi_device *spi)
/* Wait for oscillator startup timer after reset */
mdelay(MCP251X_OST_DELAY_MS);
reg = mcp251x_read_reg(spi, CANSTAT);
if ((reg & CANCTRL_REQOP_MASK) != CANCTRL_REQOP_CONF)
return -ENODEV;
......@@ -820,9 +820,8 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
/* receive buffer 0 */
if (intf & CANINTF_RX0IF) {
mcp251x_hw_rx(spi, 0);
/*
* Free one buffer ASAP
* (The MCP2515 does this automatically.)
/* Free one buffer ASAP
* (The MCP2515/25625 does this automatically.)
*/
if (mcp251x_is_2510(spi))
mcp251x_write_bits(spi, CANINTF, CANINTF_RX0IF, 0x00);
......@@ -831,7 +830,7 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
/* receive buffer 1 */
if (intf & CANINTF_RX1IF) {
mcp251x_hw_rx(spi, 1);
/* the MCP2515 does this automatically */
/* The MCP2515/25625 does this automatically. */
if (mcp251x_is_2510(spi))
clear_intf |= CANINTF_RX1IF;
}
......@@ -1006,6 +1005,10 @@ static const struct of_device_id mcp251x_of_match[] = {
.compatible = "microchip,mcp2515",
.data = (void *)CAN_MCP251X_MCP2515,
},
{
.compatible = "microchip,mcp25625",
.data = (void *)CAN_MCP251X_MCP25625,
},
{ }
};
MODULE_DEVICE_TABLE(of, mcp251x_of_match);
......@@ -1019,6 +1022,10 @@ static const struct spi_device_id mcp251x_id_table[] = {
.name = "mcp2515",
.driver_data = (kernel_ulong_t)CAN_MCP251X_MCP2515,
},
{
.name = "mcp25625",
.driver_data = (kernel_ulong_t)CAN_MCP251X_MCP25625,
},
{ }
};
MODULE_DEVICE_TABLE(spi, mcp251x_id_table);
......@@ -1259,5 +1266,5 @@ module_spi_driver(mcp251x_can_driver);
MODULE_AUTHOR("Chris Elston <celston@katalix.com>, "
"Christian Pellegrin <chripell@evolware.org>");
MODULE_DESCRIPTION("Microchip 251x CAN driver");
MODULE_DESCRIPTION("Microchip 251x/25625 CAN driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment