Commit cb007102 authored by Alexander Gordeev's avatar Alexander Gordeev Committed by Paul E. McKenney

rcu: Limit count of static data to the number of RCU levels

Although a number of RCU levels may be less than the current
maximum of four, some static data associated with each level
are allocated for all four levels. As result, the extra data
never get accessed and just wast memory. This update limits
count of allocated items to the number of used RCU levels.

Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: default avatarAlexander Gordeev <agordeev@redhat.com>
Signed-off-by: default avatarPaul E. McKenney <paulmck@linux.vnet.ibm.com>
parent 199977bf
......@@ -124,13 +124,8 @@ module_param(rcu_fanout_exact, bool, 0444);
static int rcu_fanout_leaf = RCU_FANOUT_LEAF;
module_param(rcu_fanout_leaf, int, 0444);
int rcu_num_lvls __read_mostly = RCU_NUM_LVLS;
static int num_rcu_lvl[] = { /* Number of rcu_nodes at specified level. */
NUM_RCU_LVL_0,
NUM_RCU_LVL_1,
NUM_RCU_LVL_2,
NUM_RCU_LVL_3,
NUM_RCU_LVL_4,
};
/* Number of rcu_nodes at specified level. */
static int num_rcu_lvl[] = NUM_RCU_LVL_INIT;
int rcu_num_nodes __read_mostly = NUM_RCU_NODES; /* Total # rcu_nodes in use. */
/*
......@@ -3994,16 +3989,8 @@ static void __init rcu_init_levelspread(int *levelspread, const int *levelcnt)
static void __init rcu_init_one(struct rcu_state *rsp,
struct rcu_data __percpu *rda)
{
static const char * const buf[] = {
"rcu_node_0",
"rcu_node_1",
"rcu_node_2",
"rcu_node_3" };
static const char * const fqs[] = {
"rcu_node_fqs_0",
"rcu_node_fqs_1",
"rcu_node_fqs_2",
"rcu_node_fqs_3" };
static const char * const buf[] = RCU_NODE_NAME_INIT;
static const char * const fqs[] = RCU_FQS_NAME_INIT;
static u8 fl_mask = 0x1;
int levelcnt[RCU_NUM_LVLS]; /* # nodes in each level. */
......
......@@ -68,6 +68,9 @@
# define NUM_RCU_LVL_2 0
# define NUM_RCU_LVL_3 0
# define NUM_RCU_LVL_4 0
# define NUM_RCU_LVL_INIT { NUM_RCU_LVL_0 }
# define RCU_NODE_NAME_INIT { "rcu_node_0" }
# define RCU_FQS_NAME_INIT { "rcu_node_fqs_0" }
#elif NR_CPUS <= RCU_FANOUT_2
# define RCU_NUM_LVLS 2
# define NUM_RCU_LVL_0 1
......@@ -75,6 +78,9 @@
# define NUM_RCU_LVL_2 (NR_CPUS)
# define NUM_RCU_LVL_3 0
# define NUM_RCU_LVL_4 0
# define NUM_RCU_LVL_INIT { NUM_RCU_LVL_0, NUM_RCU_LVL_1 }
# define RCU_NODE_NAME_INIT { "rcu_node_0", "rcu_node_1" }
# define RCU_FQS_NAME_INIT { "rcu_node_fqs_0", "rcu_node_fqs_1" }
#elif NR_CPUS <= RCU_FANOUT_3
# define RCU_NUM_LVLS 3
# define NUM_RCU_LVL_0 1
......@@ -82,6 +88,9 @@
# define NUM_RCU_LVL_2 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1)
# define NUM_RCU_LVL_3 (NR_CPUS)
# define NUM_RCU_LVL_4 0
# define NUM_RCU_LVL_INIT { NUM_RCU_LVL_0, NUM_RCU_LVL_1, NUM_RCU_LVL_2 }
# define RCU_NODE_NAME_INIT { "rcu_node_0", "rcu_node_1", "rcu_node_2" }
# define RCU_FQS_NAME_INIT { "rcu_node_fqs_0", "rcu_node_fqs_1", "rcu_node_fqs_2" }
#elif NR_CPUS <= RCU_FANOUT_4
# define RCU_NUM_LVLS 4
# define NUM_RCU_LVL_0 1
......@@ -89,6 +98,9 @@
# define NUM_RCU_LVL_2 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_2)
# define NUM_RCU_LVL_3 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1)
# define NUM_RCU_LVL_4 (NR_CPUS)
# define NUM_RCU_LVL_INIT { NUM_RCU_LVL_0, NUM_RCU_LVL_1, NUM_RCU_LVL_2, NUM_RCU_LVL_3 }
# define RCU_NODE_NAME_INIT { "rcu_node_0", "rcu_node_1", "rcu_node_2", "rcu_node_3" }
# define RCU_FQS_NAME_INIT { "rcu_node_fqs_0", "rcu_node_fqs_1", "rcu_node_fqs_2", "rcu_node_fqs_3" }
#else
# error "CONFIG_RCU_FANOUT insufficient for NR_CPUS"
#endif /* #if (NR_CPUS) <= RCU_FANOUT_1 */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment